Is This The Ultimate Rooftop Tinny Setup?

Рет қаралды 29,557

Жыл бұрын

G'day guys,
Join us for an exclusive tour of our ultimate rooftop tinny setup designed for epic Australian adventures.
Our 370 Outback Explorer by Quintrex ias powered by the Mercury 20hp Fourstroke engine
Our custom boat loader ensures a seamless loading and unloading process, while the Simrad NSX7 guides us through uncharted waters.
The custom wheels and drawbar makes launching and retrieving an easy process.
Have questions or eager to see more? Drop a comment below! We're here to share the journey with you.
Cheers to exploring Australia in style! 🇦🇺
#Quintrex #Simrad #Mercury #RooftopTinny #TravelAustralia #OutbackExplorer #landcruiser

Пікірлер: 49

@joshmorrison7490 Жыл бұрын

Grouse set up mate! We've got the same tinny except a F350 and a 15hp mercury. Just in the process of doing the sounder so battery wise do just use your little jump pack as your battery for when you go out to power everything? Then being super light and easy just recharge it back up when you need? Im just looking at battery options for our rooftopper.

@ReelSaltyAus Жыл бұрын

Yeah mate it powers the sounder, bilge pump and nav lights and yep charge up at then end of the day. Also have a smaller one incase it goes flat

@joshmorrison7490 Жыл бұрын

@@ReelSaltyAus thats a bloody cracking idea mate! Cheers

@edwardcolbert922 Жыл бұрын

Beautiful, nice set-up.

@reggieroo02 Жыл бұрын

sweet setup. Would be awesome for stillwater fly fishing.

@ReelSaltyAus 11 ай бұрын

Yeah plenty of room up the front for it 😃

@bigt73100 Жыл бұрын

Nice set up H 👍🏾

@ReelSaltyAus Жыл бұрын

Cheers mate going really well so far

@brettnorton5395 Жыл бұрын

Nice setup, you should do a video on your boat loader

@ReelSaltyAus Жыл бұрын

can do what would you like to see? There will be some more footage of it in our Ningaloo Eps that will be up soon

@downthetrack Жыл бұрын

Nice

@ReelSaltyAus Жыл бұрын

Thanks

@gemmabochat1314 Жыл бұрын

Hey mate, where did you get your drawbar trailer attachment for the tinny?

@ReelSaltyAus 6 ай бұрын

We had them fabricated 👌🏽

@Atreju98050 11 ай бұрын

awesome setup man! thx for sharing though! I need to build these decks, too. my english is not the best and I did not understand which material it is that you used for the decks. do you still have the ebay links? thanks man! cheers!

@ReelSaltyAus 10 ай бұрын

Thank you! I used 17mm form ply and EVA foam decking

@scotttroyahn4016 Жыл бұрын

Amazing set up bud, where did you film this ep?

@ReelSaltyAus Жыл бұрын

Cheers mate, Gunn Point

@cheekyvanlife Жыл бұрын

Hey mate love the set up. Just working on my own set up. How far have you travelled towing with that trailer? Where’d you get it from?

@cheekyvanlife Жыл бұрын

Also where’d you get your outboard holder on your van draw bar?

@ReelSaltyAus Жыл бұрын

Hey mate cheers it all works really well Have towed a few kms on private land, had it fabricated. The outboard holder was from Rob at Real Ezy Trailers

@georgespiropoulos4892 6 ай бұрын

Gday mate, great setup, could you pls explain a bit more on how you connected the battery pack to power all the devices? thanks

@ReelSaltyAus 6 ай бұрын

Thanks, battery connected into an Anderson plug then into a fused switch panel which goes to bilge, nav lights, sounder

@georgespiropoulos4892 6 ай бұрын

@@ReelSaltyAus sorry mate I’m pretty new to boating, how did you wire up the back of the switch panel? How did you connect Anderson plug to switch panel? cheers

@michaelfree2795 Жыл бұрын

Hey mate, where did you get the Anderson plug attachment for the noco?

@ReelSaltyAus Жыл бұрын

Just chopped the cable it came with and put an Anderson on 👌🏽

@wesleytaylor2242 Жыл бұрын

Nice ! Did you make the draw bar set up or is it something one can get ? What GVM upgrade do you have ? Hz your weights ?

@ReelSaltyAus Жыл бұрын

Had the drawbar and wheels made up. Yep GVM, GCM & Axle upgrades, weights are all fine

@lamontcranston2256 Жыл бұрын

Where did you get them made up??

@justinvenn1062 8 ай бұрын

Hey mate where did you get the wheels from. Great setup btw

@ReelSaltyAus 8 ай бұрын

Cheers mate! We had them made up, works really well 👍🏽

@James-rx7ec 10 ай бұрын

Nice set up happy with the 20hp wish you got the 25hp? Or power trim?

@ReelSaltyAus 10 ай бұрын

Very happy with the 20 merc, wouldn’t want it any heavier to lift around

@jamesknightfishing9851 11 ай бұрын

Plenty of room with the miso and 2 kids

@ReelSaltyAus 10 ай бұрын

Yeah more than enough hey

@jacktraynor3384 11 ай бұрын

Where did you get the front end of the trailer?

@ReelSaltyAus 10 ай бұрын

Had it fabricated, works really well

@astonhilder3893 4 ай бұрын

Hey mate what is that mount for the simrad called exactly ?

@ReelSaltyAus 4 ай бұрын

Railblaza mount

@user-bh1km8qx3d 4 ай бұрын

Where did you get the jump pack from

@ReelSaltyAus 4 ай бұрын

We have a Noco genius and also an itech jump starter, both work well

@haydnbruce9297 Жыл бұрын

who set up the front deck?

@ReelSaltyAus Жыл бұрын

We did it ourselves

@Atreju98050 11 ай бұрын

can you explain more in detail and or provide more information on material etc? would be great! cheers!

@TheSurfjumper Жыл бұрын

Quickest way to destroy your impeller by running it out of the water with no cooling

@ReelSaltyAus Жыл бұрын

Just love that sound though, would've still been moist from being in the water ;P

@stavrock4995 Жыл бұрын

Don’t have you small children walking around when loading it - things break you know !

@ReelSaltyAus Жыл бұрын

yes definitely don't let them or anyone under it when its going up!

@DC-ri2cn 7 ай бұрын

Ok Karen…