it's FINALLY Here!! aFe Power Terra Guard Bumper w/ Winch Mount for the Subaru Outback Wilderness

Рет қаралды 6,314

Күн бұрын

Hello Everyone,
I finally received, very first, All NEW aFe Power Terra Guard Bumper Guard with a Winch Mount for the Subaru Outback Wilderness, and let's take a look!
Update
after speaking with the VP of aFe regarding the fitment, they have updated the mounting bracket to have a better fitment.
#afepower #subaruoutback #wilderness
aFe Terra Guard Bumper : afepower.com/afe-power-79-270...
Skid Plate installation : • Engine and Rear Differ...
aFe Rock Slider installation : • CHECK OUT the All NEW ...
Subaru Outback Wilderness Mods:
Amazon Part List : www.amazon.com/shop/chasingad...
Non Amazon:
- LP Aventure LP1 17x7.5 20mm Offset : tinyurl.com/muwdwukc
- Mickey Thompson Baja Boss AT 245/65/17 : tinyurl.com/3rh4d66v
- LP Aventure Ditch Light Brackets : tinyurl.com/4appdw3t
- Novsight 2 Inch LED Spot Pod Ditch Light : tinyurl.com/yc4s3mx7
- Novsight 3 Inch LED Flood Pod Ditch Light : tinyurl.com/u4dnvakh
(Use "CHASINGADV25" Discount Code for 20% off at Novsight)
- AUXBEAM 7" LED Lights : tinyurl.com/y5x32c9y
(Use Discount Code "ChasingADV15" for 15% off)
- Orbis Overlanding Rack Wing and Molle Panel : tinyurl.com/mw2nd8wt
(Use "CHASINGADVENTURES" Discount Code for 5% off at Orbis Overlanding)
- Rotopax 1.75 Fuel Containers : rotopax.com/blems/
- Gorilla Clamps : gorillaclamp.com/
- Her Necklace : / hernecklace.today
- SMK Fabrication mount : tinyurl.com/4c3ke8zf
- Screen ProTech : tinyurl.com/yck92tt5
(Use Discount Code "ChasingADV10" for 10% Off)
- aFe Terra Guard Rock Slider : tinyurl.com/2jyj326p
- aFe Terra Guard Bumper w/Winch Mount : tinyurl.com/3jsevzaa
Camping : tinyurl.com/2p9chr72
Subaru Outback Wilderness : tinyurl.com/yhujhv3a
Camping Gear Reviews : tinyurl.com/yckwe2nt
Travel : tinyurl.com/y6tdtyub
Follow us
IG: / _chasingadventures_
FB: / chasingadv

Пікірлер: 48

@MarkJohnson-wt3su 4 ай бұрын

Great to see this! I look forward to seeing you add a winch. I’m definitely going to check out AFE.

@ChasingAdventuresCO 4 ай бұрын

Thank you!

@wayfairing_soul 4 ай бұрын

New subscriber and new Subaru owner (custom ordered a Forester Wilderness). Loving your content. I especially appreciate that you both thoroughly review your items but also look for affordable options. We often only get one or the other - not both.

@ChasingAdventuresCO 4 ай бұрын

welcome and congrats on your purchase!!

@PNWSubaruAdventures 4 ай бұрын

I just bought a winch bumper today! I'm so glad we are taking this big step! I've been wanting to take more trips to Washington this year, we should get a group together and go wheel and use those winches! awesome video man! 💛🖤💛🖤

@ChasingAdventuresCO 4 ай бұрын

sweet!! can't wait till I go with the group again! been super busy with the move and my baby girl.

@wendellfinney2848 2 ай бұрын

Looks GREAT!!!

@ChasingAdventuresCO 2 ай бұрын

Thank you!

@Kiss__Kiss 4 ай бұрын

It's honestly and shocking (in a good way) to see a company like aFe manufacture items like these. While I've owned Subaru vehicles since the late 80s, I've also owned Audi vehicles since around the same time. What I'm saying is, I've used aFe intakes for my Audi vehicles in the past, but this is "Next Level," as the kids say.

@ChasingAdventuresCO 4 ай бұрын

I am with you!!

@sigmazerofive 3 ай бұрын

Definitely get the Warn winch that fits that footprint . They’re the gold standard.

@ChasingAdventuresCO 3 ай бұрын

Thanks for your recommendation

@semperfidelis8011 19 күн бұрын

Hi CA do you have a video on your DIY aluminum light bar? I love what you’re doing in your Subaru OBW.

@ChasingAdventuresCO 18 күн бұрын

Hi! Unfortunately, I do not.. I didn't know how it would turn out, so I didn't make one.

@godsoe_is_old 3 ай бұрын

Maybe you could mount your aluminum bar to the bumper guard allowing you to keep the wider placement of the front LED’s …you could even paint it with that same textured black protective paint!

@ChasingAdventuresCO 3 ай бұрын

That is a great idea! Thanks!

@davevick1775 4 ай бұрын

You'll want a Warn Axon 55-S winch - fifty feet of synthetic rope, 5,500-lb. capacity. That's the most powerful winch you can put on that bar. If you need more winch than that, you're doing something wrong... Really, the 4,500-lb. Axon would probably do you right but if the extra purchase price is no problem, go for the 55-S; it's better to have a bigger winch and not need it than to need it and not have it. Also, get a snatch block or two for your recovery gear tool kit so you can rig the winch up like a block-&-fall and double your effective pulling power as needed. Frankly, I'm more impressed by the LP Aventure large bumper guard & front skid plate that I put on my Outback, even though it's not winch-capable. Looks like this aFe guard needs a bit more development in the Fit-&-Finish department, and the skid plate is woefully undersized & looks like an afterthought.

@ChasingAdventuresCO 4 ай бұрын

Thank you for your recommendation, and tips about snatch block!! I will most likely go with 45-s and get a snatch block. Bumper guard is preproduction and since then, they made improvements on the fitment and they are working on larger skid plate so once I get my hands on it, I will make an update video.

@tomcole4736 3 ай бұрын

I hate to point this out mr OCD but your homemade light bar while good is not level compared to your new bumper you just put on. It higher on the left side. Put the floods on the new winch mount bar you just installed. It will look much better, you can always aim them a little off to the sides if you goal is wide coverage. I would get some stock aluminum plate similar to the new skid plate that came wit the kit and extend that coverage from where the plate came up short in the width dept. Your car is looking really good

@ChasingAdventuresCO 3 ай бұрын

it sure wasn't and it was driving me crazy but now that the lights are on the bumper guard, I could go to sleep in peace. LOL and they are working on bigger skid plates to cover! so as soon as I get that, I will make a video of it. thank you for tuning in.

@wanglee21 4 ай бұрын

I see you have some of the Her Necklace lights. I had helpped them with some of the flaws of that product when they were first selling them.

@ChasingAdventuresCO 4 ай бұрын

Awesome 👌

@user-ky1jp7ev8b 4 ай бұрын

Good video, but looks like junk to me which is odd from AFe as their intakes (like the one I use on my Veloster N) are top notch. I'd be returning that right away. It not fitting, and the skid plate looks like aftermarket junk to be honest. I personally wouldn't trust it with a winch on it, let along relying on those mounting points to pull you out, looks like it would snap or bend pretty badly. The skid plate seems like an afterthought. Why isn't it black to match? Why doesn't it cover under the car more? Almost sounds like they had sheets of this stuff and found the best way to cut it to get rid of it with the least cost to them. I dunno, I'd like to see better options before going this route but thanks for posting this video. I've been looking at Outbacks recently to replace the VN.

@ChasingAdventuresCO 4 ай бұрын

Thank you for your feedback and this was a preproduction and since then, they made improvements on the fitment and are making new skid plates to cover more of the underbody. so as soon as I get receive the updated parts, I will make an updated video.

@KaptainKlunk1 4 ай бұрын

Production and finishing Quality IE welding is shocking on that Bumper ....

@ChasingAdventuresCO 4 ай бұрын

this is preproduction and since then, they made improvements on it.

@DeepSouthExperience 4 ай бұрын

Have you done a video on which tow hooks? I was wondering where you got yours. Thanks SD

@ChasingAdventuresCO 4 ай бұрын

no, I haven't, but I do briefly talk about it in this video kzfaq.info/get/bejne/p8xleNFkuJ60aHk.html

@DeepSouthExperience 4 ай бұрын

@@ChasingAdventuresCO Thanks man. I have a 2024 CTW. I get ideas from you because there are not a lot of videos on CT mods.

@ChasingAdventuresCO 4 ай бұрын

@@DeepSouthExperience anytime!! congrats on your purchase~!!

@headofahessian 4 ай бұрын

I wouldn’t trust that with a winch at all. That’s also killing the approach angle. Seems like it’s for aesthetic and that’s it.

@ChasingAdventuresCO 4 ай бұрын

Thanks for your feedback and can you explain why you wouldn't trust it with the winch?

@headofahessian 4 ай бұрын

The overall design of it is just not well thought out for the stresses that winching causes, there’s a reason all the current winch bumpers in the Subaru market connect by replacing the crashbar. The welds look cold as well. I’m also skeptical of how it would hold up if it’s anything other than a straight pull. Their “rock sliders” don’t look great either strictly because of how they mount. They will ad some protection but I wouldn’t trust them like I would full force metal works ones which I have beat the crap out of and they have protected my crosstrek from a lot of damage lol. This seems to be a parts company that makes go fast parts trying to break into the off-road Subaru market but doesn’t really have any experience in off road Crawford is another company who’s tried doing this.

@ChasingAdventuresCO 4 ай бұрын

@@headofahessian all good pointers. thank you for your feedback!

@Kiss__Kiss 4 ай бұрын

Revising your videos (Yes, more than one, as I just finished watching the Gas vs electric power washers), and I can't recall if you've mentioned or I've asked, if you use Regular 87 Octane? or 91+ Octane, in your OBW.

@ChasingAdventuresCO 4 ай бұрын

thanks and I normally I use 87 but if I am trailing a trailer or heavy load, I will use 91

@Kiss__Kiss 4 ай бұрын

@@ChasingAdventuresCO Ahh Perfect!! Thank you, Sir. 👍 PS: That means (at least to me) you use regular for the trails..

@ChasingAdventuresCO 4 ай бұрын

@@Kiss__Kiss yes and anytime!

@brandonporter4227 8 күн бұрын

I just bought the AFE rock sliders. Looking forward to getting them. Would like to get a winch as well, but can't decide on a hidden winch vs a bumper guard with winch mount. I also want to do full skid plates and it seems as if some of the skid plates are only compatible with certain bumper guards. Is it the same with AFE? Anyone know how their skid plates are compared to like Rallitek?

@ChasingAdventuresCO 5 күн бұрын

yes AFE is the same. they make their own skid plates.

@JasonWh Ай бұрын

If the lights are on top, don't they conflict with the lane avoidance and crash avoidance sensors up front?

@ChasingAdventuresCO Ай бұрын

Nope as there are non on the front of the car. Everything is monitored by the eye sight cameras

@billiewysong7899 2 ай бұрын

Were to get that bumper gard

@ChasingAdventuresCO 2 ай бұрын

link is in the video description

@TRU_FAMILY 2 ай бұрын

how do i put my tow hooks on the front of my subaru outback wilderness?

@ChasingAdventuresCO 2 ай бұрын

Remove the town hook cover (the orange accents) and screw in the tow hook

@TRU_FAMILY 2 ай бұрын

@@ChasingAdventuresCO Black)AMBULL Shackles 3/4" D Ring Shackle (2 Pack) 41,850lb Break Strength with 7/8" Pin, Anti Theft Security Screws, Isolator & Washer Kits for Use with… 3/4" did i buy the correct ones?

@ChasingAdventuresCO 2 ай бұрын

Sounds about right. I have links to all my Amazon parts in the video description and I would highly recommend getting the Cone shaped isolater