it was almost done and then this happened...

No video

it was almost done and then this happened...

Рет қаралды 101,542

Aussie Arvos

Күн бұрын

Пікірлер: 228

@tonybruce Жыл бұрын

Great episode. No BS, not boring, no over hype. Love it

@AussieArvos Жыл бұрын

Thanks Tony!

@CatchysAdventures Жыл бұрын

Build's coming along nicely boys! Looking really good! Super unlucky about the wheels but fingers crossed it gets sorted for you 🤞

@AussieArvos Жыл бұрын

Thanks catchys! We'll figure something out!

@brentonokeefe7321 Жыл бұрын

Awesome build. Keep it up and hopefully get the wheels sorted in time. Looking forward to it.

@fatmanoverlanding Жыл бұрын

What a bugger with the wheels. Hopefully it's sorted by now. Keen to know your thoughts on the suspension and if indeed as you've said, you'll actually use the adjustments. Loving these episodes just as much as your travel episodes. You just edit & narrate them so well. Really engaging and entertaining. Great work. 👍

@AussieArvos Жыл бұрын

Thanks so much Fatman! We will definitely let you know how they go! Really appreciate the support mate, means alot! 🤙

@harrywalker968 Жыл бұрын

@@AussieArvos bit of advice for you young wipper snappers.. TIE THE COILS IN, top & bottom.. dont rely on the shock.. or make limiting straps. for your education,,go find an f100 4x4.. maybe copy the full suspension.. japs never got it right..not even superior suspension.. just expensive sht..

@harrywalker968 Жыл бұрын

@@AussieArvos never any wheel trouble with yank stuff.. all the same from 1940..till 2000. 5 stud,, 8 stud 160.5 then 8 stud 170.. did you specify yr & 4wd.. if so, dont unrim them, ring them, take wheels there,,there problem.. i have a set of steel 16x10. with 160.5 & 170 driiled,, so they fit 3 trucks.. 1 have 4 all up.. 62 f100 4x4 v8, to a s/duty..only jap 4x4 id buy would be a gu, then fix it..proper..method wheels can be run real low pressure.. bought a set of 17 x 9,5. for s/duty, from u.s. $800 delivered..

@Br3no94 Жыл бұрын

Mint content fellas! Love seeing the production progression! Keep it up 🤙 Damn shame about the wheels but it’s gonna look so mint when you’re done Liam!

@AussieArvos Жыл бұрын

Thanks Breno! Means alot mate, cheers

@roadsafe4wd193 Жыл бұрын

Great Job Fitting Our Blackhawk Bump Stops these are available at all good off-road stores

@braunshock6112 Жыл бұрын

What an awesome build, that is going to look the mutts nuts. Thanks for keeping it real and really hope you have a solution soon.

@Mojojosie86 Жыл бұрын

Always test fit wheels before getting tyres fitted! But I guess you've learned that now 😅

@AussieArvos Жыл бұрын

Lesson learned 😅😅

@AUSBennyb Жыл бұрын

alright made her back in your prado, captain obvious here

@psmitchell Жыл бұрын

Well done, Captain obvious.

@bazza2540 Жыл бұрын

you're like those people that watch a funny video then just write the jokes out in the comments

@RoMiTouring Жыл бұрын

You guys do the best stuff on here. Always fun to watch and informative. Really enjoyed the Harry/Fire to Fork ones too..

@frmtrkr Жыл бұрын

good looking wheels, hope you get em sorted out how you want em. terrific job you are doing on the rebuild.👍

@rickyphillips8557 Жыл бұрын

Good on ya boys! Loving watching the build. Been watching your videos for few years now and your content and production value are constantly getting better and better all while staying authentic and relatable! Keep up the good work. (Good luck with the rims Liam, gotta love that stuff) 😂

@bennhall6246 Жыл бұрын

Got to roll Over and turn tv on, bang Aussie Arvos, just what I needed after a big Saturday night

@AussieArvos Жыл бұрын

Cheers mate , enjoy! 🤙

@tadeuszmichaelwlodarczyk3120 Жыл бұрын

It's definitely turning into a Beast✔️✔️. Pity to get it all dirty!!🤣. I noticed in the back ground Nice Deer 🦌 Head.

@AussieArvos Жыл бұрын

It's getting there!! Cheers :)

@PokeGaz Жыл бұрын

Absolute Devo!!!! Can only imagine the feeling in the guts when you realised they didnt fit

@Philipk65 Жыл бұрын

Great to see the Patrol coming together. Bet it will look awesome when finished, just judging from what it looks like now.

@AussieArvos Жыл бұрын

Thanks Phillip! Can't wait to show you the end result!

@Philipk65 Жыл бұрын

@@AussieArvos Will definitely be looking forward to it. Pity about your rims not fitting.

@angryman3317 Жыл бұрын

Despite the hiccups (all builds have many ) you're doing a fantastic job mate. Keen to see the end result.

@cyclemoto8744 Жыл бұрын

Keep up the positive outlook Well done lads. Cheers

@RoscoAdams-xt5lp Жыл бұрын

🇦🇺 Keep On Trucking 🛻 Luving The Rebuild 👍🏻👍🏻

@AussieArvos Жыл бұрын

Thanks Rosco!

@brettkidd7487 Жыл бұрын

Hell Yeah! 🤘 Good way to kick off the Sundee Morning 👌

@RingoTravels Жыл бұрын

Bugger - another great video though!! Looking forward to seeing the finished product 😊

@RedWazzies Жыл бұрын

I am loving your build! ❤

@TerryBeatson Жыл бұрын

Best of luck with the wheel situation, she'll be right lads. Can't wait to see how the canopy comes out.

@kylemclean4064 Жыл бұрын

Hope it all goes mint for ya next fitting Liam keep up the awesome job fellas 👍

@Jagermonsta Жыл бұрын

Ha what a bummer! good reason to go back to steelies ;) loving the build, and appreciate the way you guys interact with the camera and don't hype the shite out of everything, but still maintain enthusiasm. you guys and dan are great. refreshing even

@AussieArvos Жыл бұрын

Thanks jagermonsta! Really appreciate the support!

@leviblenkiron7572 Жыл бұрын

This is going to be such an awesome rig well done with the build so far

@Jeep.wj.tj.australia Жыл бұрын

🤞 you get it sorted 🙏 And yet another great episode 👍🏻

@samyeomans6710 Жыл бұрын

Please get some nice corner indicator lights on the front. Orange ones just look meh. Also very glad you painted it instead of raptor.

@rossco3775tv Жыл бұрын

WOW she's looking awesome mate, may as well go all out only live once. . Can't wait to see how she comes up.

@AussieArvos Жыл бұрын

Thanks Rossco!

@paulwitherington5529 Жыл бұрын

Great video as usual guys. Love how you discussed the 💲 and reasons behind your choices. Those wiper blades are bling. Shame about the wheels, seems you have ordered correct bore, just not bored correctly. Hopefully supplier will come through. Personally I can't wait to see the tray. Great build series

@mitchellboyd5256 Жыл бұрын

Awesome build 👌 just one little thing, you are better iff painting those wiper arms, on my gq the chrome used to reflect the sun like a mofo

@bigkevcanb Жыл бұрын

Bummer, great to see the build vid. Hope you get it sorted in time

@AussieArvos Жыл бұрын

Thanks big Kev!

@peterjarrett8099 Жыл бұрын

gutted!!! im sure its going to look insane with the new wheels boys!!

@HammerRocks Жыл бұрын

Yeah, make sure you can still easily access the adjustments on the remote reservoir in any conditions. Last thing you need is having to crawl underneath when wet or muddy etc. Great progress. It's starting to look like a track weapon. Beadlocks are illegal for road use in NSW. So I'm sure a lot of the hardcore 4WDers in NSW are watching this with envy. But it sux that you were sent the incorrect wheels. Hopefully it's been sorted by now. Great episode boys. 👍👍

@AussieArvos Жыл бұрын

Thanks Hammerrocks , we'll hopefully get it sorted asap!! Cheers :)

@HammerRocks Жыл бұрын

@@AussieArvos BTW boys, you should consider making a velcro backed patch of your logo. It's what I buy with content creators I follow. I hope you consider it. 🤞

@MultiSkate01 Жыл бұрын

Just the struggle of working on a car, I'm having the same issue this week. Guess we're in the same boat 😅

@AussieArvos Жыл бұрын

Haha that's it mate, not a great feeling 😅😅

@karloz83 Жыл бұрын

If you carnt get the rims take to a machine shop and get the middle lathed out to the correct size. I have done this before on an old patrol as long as the wheel studs are right it won’t take much to large the centre. Keep up the great work

@BOOST3D Жыл бұрын

You guys better feature this at Melb 4x4 show looks mint!

@theworkshopmechanicchannel3296 Жыл бұрын

Nice wheels. I’m pretty sure that somewhere in that box it will say to fit the rims to the vehicle before mounting the tyres to them to check fittment

@steventhebushwog Жыл бұрын

Spewing man. It would of been good to see them on the rig. All n all the patrol is coming along nice👌👌

@cidadaodorense3231 Жыл бұрын

You probably got the rim for a Toyota, which has a center bore of 106mm. It's really just 4mm difference on the diameter, 2mm on the wall. I almost feel like machining those 2mm of the wall would not compromise it, but who knows.

@clarkbarryj Жыл бұрын

highs and lows liam - nearly there mate ..

@AussieArvos Жыл бұрын

Thanks mate :)

@damiencrook7147 Жыл бұрын

what a shame wheels looked great, cant wait to see finished rig in Sydney. Been awesome watching the build from the start.

@AussieArvos Жыл бұрын

Thanks Damien! Hope to have it sorted by then! See you there, cheers :)

@bjlanders Жыл бұрын

Man, I just learned about this uncommon bore issue today as well! I was ready to bolt on a set of Toyota's, and noticed a slight visual difference...106 vs the required 110.....so it's either to the machine shop, or maybe a router if I feel adventurous tomorrow!

@Stuart_Field Жыл бұрын

Had a similar issue on my 06 GU TD42 ute. Got stock steelies powder coated. Needed a die-grind so they'd go back on the hubs. Tyre shop (Bob Jane Kotara NSW) were all over it. Keep up the great work tho lads it's coming together great these hiccups happen from time to time. Cheers

@mikeg1074 Жыл бұрын

Liam, I was so looking forward to see what the patrol looked like with the new rims and tyres. Hope you get it sorted mate.

@AussieArvos Жыл бұрын

Thanks Mike! Hopefully have it all sorted soon! Cheers :)

@Y61Shorty Жыл бұрын

G003 are a staple for Snow-wheeling in Alberta Canada. Great tire, my safari has them on up here for the snow 🤘🏻

@Tijke Жыл бұрын

Just an unlucky snag, but the whole build is coming along great!

@nemyla Жыл бұрын

Nearly at a 100k boys!

@AussieArvos Жыл бұрын

Getting close now!

@kingninja2794 Жыл бұрын

Max respect for taking that so well. I would have flown off the handle for something like that to sit me down Best of luck for another set though they do look schmicko

@AussieArvos Жыл бұрын

Thanks king ninja!

@JRazza89 Жыл бұрын

Get them thrown in a lathe and increase the centre bore. Not a hard job, only thing is the centre caps won't fit, but you can make 3d printed adapters or use thin alloy pipe adaptors to make them work also with the larger centre bore.

@Mic4569 Жыл бұрын

Those rims would fit the 80 perfectly ;)

@lronpaw Жыл бұрын

Thats project cars for ya! Just wondering with your remote res clamps in the rear. I've got Dobinsons MRRs' and i know their instructions say not to clamp in the middle of the body of the res. I'm guessing this is because floating piston and clamping may interfere.. if its not in their fitting instructions, worth asking the question of fulcrum to check. Keep at it fella's not far off now!

@Madmarty101 Жыл бұрын

Build looking great mate , aussie way to deal with a problem is to have a laugh and move forward, so wheelie shame about the rims but can't wait to see when it's sorted out

@AussieArvos Жыл бұрын

Thanks Marty! That's it, We'll figure something out !

@truetierra Жыл бұрын

Bugger about the rims. They owe ya a carton for the mixup for sure! Rig is looking sik though.

@blairskevington6631 Жыл бұрын

the builds looking great, it sucks when parts dont work out but im sure nathan will sort you out

@chrisbeerad8835 Жыл бұрын

Machine the centers out . ive done it before numerous times . just ensure there is still enough wall section. Great choice of tyre as well they will smoke razors in slop you watch

@bogan1as Жыл бұрын

Really keen for the tray ep once i get my new car ill be pulling my gu off the road for a make over and currently looking for inspiration

@sefisredtv8991 Жыл бұрын

Excited for the tire review. Separate video pls.

@blackbilly1965 Жыл бұрын

Bummer bro, the tire rim combo looks badass

@AussieArvos Жыл бұрын

Thanks Billy, hopefully can get something sorted 🤞

@daylanhonrado1639 Жыл бұрын

You can get them bored out at any tyre shop got mine done at continental Mitcham

@Zobby447 Жыл бұрын

Have a look at JW speaker 8700 headlights absolutely Awsome upgrade

@monaroman37 Жыл бұрын

remote res bolt at top be hard to undo with tray on, turn brackets around

@brentway5914 Жыл бұрын

You should be able to keep those rims and get the 10mm machined !

@joels2517 Жыл бұрын

Makes me feel better about my 4wd issues

@andrewsoutdoors1802 Жыл бұрын

Bugger guys, but what doesn’t kill you makes you stronger 💪

@AussieArvos Жыл бұрын

Haha that's it , all part of it!

@andrewsoutdoors1802 Жыл бұрын

@@AussieArvos exactly…. It’s like a trip where nothing goes wrong… you never remember them.

@jpbloodyaussie Жыл бұрын

Nice rims to suit a Navara...........

@PaddyBoy644 Жыл бұрын

That’s wheelie disappointing mate! All jokes aside this rig is looking awesome can’t wait to see it out on the tracks. Cheers Pat

@AussieArvos Жыл бұрын

Thanks Pat!!

@kettlegq8792 Жыл бұрын

I had the same problem with my non beadlock walkers and had them machine out with the boys at off-road konnection as alloy wheels are had to find with a big bore

@PoppoPoops-lb4qu Жыл бұрын

Awesome

@Reuben_rmr Жыл бұрын

Just need the bores machined. Common practice as the older vehicles like Gu and Gq are larger than the new vehicles they manufacture these wheels to suit

@scottcrowe6736 Жыл бұрын

Looking good, hope to catch up with you blokes in Sydney 👍

@AussieArvos Жыл бұрын

Thanks Scott! See you there! Cheers

@rotamota3200 Жыл бұрын

Aren't beadlock wheels illegal here in VIC?

@BrentonStammberger Жыл бұрын

everything is in VIC

@jamesbeasley1753 Жыл бұрын

Gonna be a weapon mate, fingers crossed about the wheels, shit happens

@AussieArvos Жыл бұрын

Thanks James! We'll get there!

@bradrugg8705 Жыл бұрын

Bloodly gutted lads. Good attitude to have though. The build is looking awesome and I'm m sure you'll have it sorted soon.

@AussieArvos Жыл бұрын

Thanks Brad! We'll work out a solution 🤞 Cheers for the support 🤙

@ptime5612 Жыл бұрын

I should go to bed but then I saw this recent upload

@ashleyduvall1962 Жыл бұрын

Looking good

@AussieArvos Жыл бұрын

Thanks Ashley!

@ashleyduvall1962 Жыл бұрын

@@AussieArvos it will run rings around my Y62 once you get it completed

@NateH-qd7bm Жыл бұрын

Poor Liam is it, that would suck but at least the looks good

@aus-reviews8462 Жыл бұрын

took one for the team mate...

@sashovasilevski Жыл бұрын

The builds looking good. Just like new. Rims look tough but how do you get insurance with bead locks? I was looking at getting a set but was told by racv they won’t insure my rig with beadlocks. Can’t wait to see you rip up the tracks with your new rig.

@Rightomate Жыл бұрын

Are you going to get it engineered? Build has come along great. Would be a shame to get it defected for 35s and lift. I personally have had nothing but dramas with police in the high country due to lift and tyres.

@outlawdingo3020 Жыл бұрын

You could send the rims to a machine shop to bore the centre out to the measurement you need

@sama5946 Жыл бұрын

With a set up like this is your old man a engineer? Boiler maker? Mechanic?

@jakefoster633 Жыл бұрын

Bummer on the rims man but keep up the content the Gq coming along mint! 👌🏼

@AussieArvos Жыл бұрын

Thanks Jake!

@dirtroads.sandycoves Жыл бұрын

Awesome vid mate, Wheres that power steering cooler from? I need to move/update mine

@jayarre1839 Жыл бұрын

I really hope you used a genuine windscreen seal bro 😭 if you didn’t it will %110 leak. also if any sealant was used it will definitely cause rust and leaks. take it from me, had my windscreen changed 4 times, leaked 3/4 until the 4th when i finally got a genuine seal

@nathanbirkefeld7211 Жыл бұрын

Get yourself some coil retainers so they don’t pop out when wheeling offroad.

@MitchDenham Жыл бұрын

Shame about the wheels mate. I have the All Terrain Yokohama Geolandar’s on my Prado 150, and they’re epic tyres. I’ll definitely be going the Geo’s again, but maybe the AT-X next time for a bit more aggressive tread.

@craiglewis7671 Жыл бұрын

Man. I could feel your pain. It’s all looking awesome. Just a question if anyone knows, are 35’s and a 3” legal in Victoria, and how do you get around fitting them?

@bogged2theeyeballs695 Жыл бұрын

Must be fully inspected, tested and certified by an automotive engineer. You should talk to one BEFORE you start or there is a good chance you will waste your money on parts that don't meet the engineering requirements. This video gives you a good idea of how an automotive engineer goes about the certification and all the work and paperwork involved. This is N.S.W. and while laws vary from state to state, the process of certification is basically the same. kzfaq.info/get/bejne/odGDppuhtKmsg2w.html

@ZedF Жыл бұрын

Vic's a nannie state, far from legal. I'm sure some mobs would engineer it but without it and by the book, no way in hell for any of the above. Beadlocks are a canary on their own

@6226superhurricane Жыл бұрын

get the centre bores opened up on a lathe. carton of beer or two should sort that minor problem out.

@ligmaballz2324 Жыл бұрын

Can you do a price breakdown once your finished

@hemaldaha Жыл бұрын

these issues are common. hope you can get a replacement quickly

@ReduxGarage Жыл бұрын

If the supplier sent you the wrong wheels and is going to stick you with their mistake, a decent machine shop will fix up that centre bore for you.

@operation4wheelz Жыл бұрын

Get the tow truck on speed dial 👍

@dwayneadamec1993 Жыл бұрын

Get a machine shop to take out the centre to the correct size will cost bigger all

@mudgutzadventures436 Жыл бұрын

Stupid question because it'd remove the ability to rotate tyres but are there front and rear specific rims in that set.

@photografiq_presents Жыл бұрын

What a fvck around. How many times you hear about how it looks :D Even the heroes in the comments, gonna look mint mate :D :D My favourite though "These wheels are quite unique, there's a couple of others the same on the market" 🤣🤣🤣

@roga8681 Жыл бұрын

Where are the spring cushion rubbers for the top and bottom of the springs ??

@Curbo1978 Жыл бұрын

"you mount them you own them" pretty much an industry standard for wheels

@Aussiefan12345678 Жыл бұрын

if you are given a guarantee that they fit the patrol hubs and they don't, its false advertising and you have the right to send them back and get them replaced. My dad did 5,000 kms with the wrong tyres (legally couldn't go on his standard rims), and when the shop noticed their mistake, they replaced them with correct ones free of charge.

@tbon.4458 Жыл бұрын

consumer affairs would disagree considering they weren’t as advertised

@elwoodhewitt Жыл бұрын

Question, did the two blue fulcrum springs look the same height? Is there a driver's side and a passenger side because of a load difference?

@arian4698 Жыл бұрын

Was it all the wheels that were not bored out correctly? Cause there were still 4 wheels/tyres on the back of the Ute at 17:20.

@aaron.courtney Жыл бұрын

The more I think about this, the more I would be interested to see what the retailer says about this. The box clearly states 110.15mm, and if it's not that all the way through the "bore" then it's not as described. All their rims are not as described, misleading, or maybe it was a Friday arvo job and they "forgot" to bore all the way through on yours. Is it only one that is like that or all of them?