DIY LED Lamp for your girlfriend - How to make Here you can download the files drive.google.com/open?id=1-fM...
Пікірлер: 804
@zaffarkhan79826 жыл бұрын
Wow! Very painstakingly done, very elaborate... You must be really loving her. Lucky girl. ;)
@IulianMan6 жыл бұрын
Thanks!
@jeremynading20066 жыл бұрын
Not a bad build. However it would be better if you closed the bottom with a piece of aluminum then put the feet on. The aluminum would not only stop the light from coming out the bottom but it would also act as a heatsink and if you polish it would reflect light back up through any gaps between the light strip and wood.
@l-i-l-s5 жыл бұрын
Cute! However, rather than converting the design into a stencil, one could tape it to the underside of the acrylic. Considering it's transparency, one could easily trace it. Hope this tip helps. :)
@IulianMan5 жыл бұрын
Yes it is. Thanks!
@motsuopatton66206 жыл бұрын
Wow.... you inspired me... now it’s keep me wondering.. when I will start making for my lovely girl.
@IulianMan6 жыл бұрын
Thanks!
@somu06nsk6 жыл бұрын
Fabulous. Ur girl is lucky to have such creative bf. Good keep it up.
@IulianMan6 жыл бұрын
Thank you I'm glad you like it.
@amanymhmd13196 жыл бұрын
Great work !! Can you please send me the template too? and tell me where can I buy the acrylic glass from? Thank you, have a nice day
@IulianMan6 жыл бұрын
Thanks write my the email address
@althafallu91014 жыл бұрын
Wher was they found tell me
@bobovyhasicaky24186 жыл бұрын
This awesome idea must have more likes.
@IulianMan6 жыл бұрын
Thanks!
@tonyramirez84246 жыл бұрын
Good video I loved the covers are beautiful a like keeps going up more videos of these
@IulianMan5 жыл бұрын
Thank you very much I'm glad you like it.
@MrLion9115 жыл бұрын
Se podría poner puentes de cable entre la tira LED para evitar que se vea la luz por debajo de la base, o bien poner una tapa
@IulianMan5 жыл бұрын
Yes it is. But I said it may seem floating like that if the light is visible and below.
@ahadkmk5 жыл бұрын
Excellent craftsmanship, suggested improvement is to polish the wood stand. Anyways excellent job done.
@IulianMan5 жыл бұрын
Thank you. Yes , I have to do this too, to look better.
@Sonparimahi6 жыл бұрын
Nice
@IulianMan6 жыл бұрын
Thanks
@kellyfagan38234 жыл бұрын
I am just getting into this epoxy resin/lamp project genre but am really dumb when it comes the lighting end of it. Can you specificaly list all the electrical components you used here. Thank you so much. Keep up the great work.
@IulianMan4 жыл бұрын
Thanks! materials and tools: Acrylic glass Mini Drill with Diamond Ball Drill Bit to scratch the glass controller RGB for led strip RGB led strip 12v Transform
@robsonwaynneantonio94724 жыл бұрын
Parabens amigo...show de bola! 👍🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
@IulianMan4 жыл бұрын
Thanks!
@papplaszlo7875 жыл бұрын
How can you dislike?!😤 Very cool!!👍👏👏
@IulianMan5 жыл бұрын
Thanks! I appreciate.
@redfire78776 жыл бұрын
There are loves than get a new subscriptor and a like 👏👏👏👏 Amazing! ❤️
@IulianMan6 жыл бұрын
Thanks
@madezine6374 жыл бұрын
Great works! Btw, what kind of wood did you use ?
@chellymohamed25024 жыл бұрын
oAk
@erniwahyuni93936 жыл бұрын
wow..It's awesome..I like it
@IulianMan6 жыл бұрын
thank you for your appreciation
@nehawaliya30696 жыл бұрын
I want to take this
@jayvariasi74884 жыл бұрын
Lu terbaik pokok nya bang,.. inspirasi buat banyak orang untuk berkreasi
@IulianMan4 жыл бұрын
Thanks!
@mangarachanell77765 жыл бұрын
Mantap
@SathyaRavi46sathya6 жыл бұрын
Very nice one ... Best wishes ...
@IulianMan6 жыл бұрын
Thanks
@IulianMan6 жыл бұрын
what country are you from? I'm from Romania and it may cost a lot the transport.
@IulianMan6 жыл бұрын
I've been looking for an estimated shipping cost with the courier from Romania to UK and cost about $ 50.Pretty expensive
@IulianMan6 жыл бұрын
I do not know. Probably the distance. I'll try to find one cheaper.
@nazmulhossanpolash94185 жыл бұрын
@@IulianMan hi, I will buy it, But how? Please know me. Please contact with me: 01919 481976 & nazmul.use2018@gmail.com
@manueltellovazquez28635 жыл бұрын
Amigo buen trabajo....mira un tip para que tu trabajo quede mucho más fino...éstos letreros yo los hago..1o. Elaboro el diseño en Corel Draw dimensionándolo a su tamaño real, 2o. Hago la impresión en un ploter de corte de vinil ó con película fotosensible especial para sanblasting o arenado, para que las letras queden totalmente uniformes por que con el Dremel y manualmente no quedan del todo bien (Nota el diseño lo imprimo en la forma espejo para que el texto ó dibujo no se vea con arañazos) espero que te sirva éste tip. Un saludo desde Villahermosa, Tabasco México.
@IulianMan5 жыл бұрын
Hello Yes it is a good idea Thank you for the advice. Greetings from Romania. Thanks for watching!
@laraza495075 жыл бұрын
De cual vinyl usas?Manuel
@odinandfreki6 жыл бұрын
That's so sweet, and amazing!
@IulianMan6 жыл бұрын
THANKS!
@user-ym4se1xb1o5 жыл бұрын
De konijnenknuffelaar Новерное лапотник,так безобразно собрал.
@aquaholicsuk88735 жыл бұрын
If I had the skills, I'd make one for you!
@thealias63565 жыл бұрын
De konijnenknuffelaar What Am I Your B O N O B O :-)
@rohzpopper49224 жыл бұрын
Surface your video today. Great job dude !
@IulianMan4 жыл бұрын
Thanks!
@SanaSeohyunSeulgiSakuraJiSoo6 жыл бұрын
i will make for myself. 😂
@IulianMan6 жыл бұрын
😂 Very good
@hwhob83726 жыл бұрын
Sana Seohyun Seulgi Sinb Sejeong Jisoo :3 i can make it for you 😁😁😁
@mmsvshanimmsvshani50056 жыл бұрын
Sana Seohyun Seulgi Sinb Sejeong Jisoo :3 tanks 👍
@mmsvshanimmsvshani50056 жыл бұрын
Iulian Man 👍
@aquaholicsuk88735 жыл бұрын
Sana, I'm going to make you one and deliver it on Valentine's day. I'll do one better, I'll plant a tree and wait until it's mature enough to cut down. AND.....I'll put two hearts in it.
@yeseniavelasco73475 жыл бұрын
Simplemente Es Hermoso 😍
@IulianMan5 жыл бұрын
THANKS
@damiaomendes28096 жыл бұрын
Muito obrigado !
@kalyanibhattad71095 жыл бұрын
Which side comes front ? The side having engrayor the back side of engraved surface???
@IulianMan5 жыл бұрын
The side having engraving
@kithmininoopama31305 жыл бұрын
Amazing !!!
@IulianMan5 жыл бұрын
Thanks!
@BarryLawrensen6 жыл бұрын
What kind of glue do you use?
@IulianMan6 жыл бұрын
Hello , Smart Kleber it is a cyanoacrylate glue and glass powder
@plasiormourgos38964 жыл бұрын
very nice idea!!! im thinking about what to do my self, it's really nice to give handmade gifts. Could you please tell me what you are using to "scratch" the glass? cant really tell what that is 😅
@IulianMan4 жыл бұрын
Thanks! materials and tools: Acrylic glass Mini Drill with Diamond Ball Drill Bit to scratch the glass controller RGB for led strip RGB led strip 12v Transform
@dubaipreneur62395 жыл бұрын
Awesome work!
@IulianMan5 жыл бұрын
Thanks!
@triplemoon696 жыл бұрын
is that epoxy your using in the cracks to help keep the boards together?
@IulianMan6 жыл бұрын
Hello Not It's a super glue with fill
@mihaelamartun70665 жыл бұрын
You made it for me ♡
@IulianMan5 жыл бұрын
Yes! :))
@bogadipayalnagambica11976 жыл бұрын
what are the components you used plz say for me ,i will make it. it's superbbbbbbbbb......
@IulianMan6 жыл бұрын
hello, Acrylic glass Mini Drill with Diamond Ball Drill Bit to scratch the glass controller RGB for led strip RGB led strip 12v Transformer
@IulianMan6 жыл бұрын
Thanks Good luck
@edb30055 жыл бұрын
Just a question...Why would you cut out the paper? It would be more faster to flip the drawing over on the glass and then taping it and then tracing it directly on the glass avoiding all the time you spent cutting out the paper? That would save much time!
@IulianMan5 жыл бұрын
Yes, you are right. I really do not know why I chose to do that
@edb30055 жыл бұрын
@@IulianMan it's still awesome... I'm wanting to build one myself!
@IulianMan5 жыл бұрын
@@edb3005 THANKS! if you like, I can send you the template.
@edb30055 жыл бұрын
@@IulianMan that would be nice if you.
@IulianMan5 жыл бұрын
Write me a mail address to send the files. is a PDF file and one CorelDraw
@CookingGuy8154 жыл бұрын
Iulian Man Good Idea !
@IulianMan4 жыл бұрын
thanks!
@ItaloLima6 жыл бұрын
Good ! Like !
@wealmostvegan6 жыл бұрын
❤❤❤
@sevendays2116 жыл бұрын
GREAT!!! i like it
@IulianMan6 жыл бұрын
Thanks!
@geovannypelaezarias44445 жыл бұрын
very nice work, congratulations man
@IulianMan5 жыл бұрын
Thank you very much!
@furypt51846 жыл бұрын
Great job!! is that glass or acrylic?
@IulianMan6 жыл бұрын
thanks , acrylic
@Hadi56565 жыл бұрын
This is pro, man
@IulianMan5 жыл бұрын
Thanks!
@dalglessalgueiro80695 жыл бұрын
Good job bro.. But, how can you write those letters on the acrylic?
@IulianMan4 жыл бұрын
Thanks! with mini drill the acrylic is scratched
@ShahbazAli-us7pg6 жыл бұрын
So cute
@Randy27476 жыл бұрын
Great work my friend!! Can you please send me the template too? do you have a link where you bought your leds from? Thank you, have a great day
@IulianMan6 жыл бұрын
Hello, thanks I'm glad you like it. I'm sending the email now
@danielmoronta89596 жыл бұрын
Hello, Randy. You can send me the form? Thank you! daniel moronta 23@hotmail.com
@IulianMan6 жыл бұрын
I'm sending the email now
@Randy27476 жыл бұрын
Iulian Man I forwarded it to him when he posted and explained that it's your video 👍😉thx again for sharing
@IulianMan6 жыл бұрын
ok thanks for your help
@theultimatemechanic28756 жыл бұрын
Which tool do you use for scatching the acrylic sheet...??
@IulianMan6 жыл бұрын
Is called Diamond Ball Drill Bit
@vitalikmotorider38966 жыл бұрын
what material was used for inscriptions and where can I find such a stencil?
@IulianMan6 жыл бұрын
Hello, I used the Mini Drill and Diamond Ball Drill Bit
@lasuardimanes71194 жыл бұрын
Good job I like it keep up the good work 😃😃
@IulianMan4 жыл бұрын
Thanks!
@alakealake6 жыл бұрын
What company machine do u recommend.. I would like to buy the one u r using with all the tools.. May I know where I can buy it from? Online.
@IulianMan6 жыл бұрын
Hello The mini drill ?
@anusreedas4256 жыл бұрын
I want to try this amazing things
@IulianMan6 жыл бұрын
Hello Glad you like. If you need information, I help you with pleasure.
@althafallu91014 жыл бұрын
Iam also trying in this type plz hel me
@luisfelipevalverde33195 жыл бұрын
Qué pegantes usaste, y para que el soplete?....Felicitaciones hermoso proyecto
@IulianMan5 жыл бұрын
Hello Is a super glue with filler (with filler material). And I used the gas burner to finish the edges. You can go over that step or you can use a cigarette lighter. Thanks!
@luisfelipevalverde33195 жыл бұрын
@@IulianMan Gracias por responder..Sigue adelante, bello proyecto.
@IulianMan5 жыл бұрын
With pleasure Thanks!
@dorismorgan84085 жыл бұрын
This is lovely..
@IulianMan5 жыл бұрын
Thanks!
@itsmearchieeww58986 жыл бұрын
sir, may i know what material did you use . ? especially for that led and glue. sorry for what i asking at you, but it is really make me want to make it by myself
@IulianMan6 жыл бұрын
Hello. I'm glad you like this project. Led - rgb led strip RGB led controller Smart Kleber (Cyanoacrylate Glue)
@itsmearchieeww58986 жыл бұрын
thank you so much sir
@IulianMan6 жыл бұрын
with pleasure
@jonathankharkongor18315 жыл бұрын
Masterpiece☺☺
@IulianMan5 жыл бұрын
Thanks
@IulianMan5 жыл бұрын
Thanks!
@fallabdouaziz17995 жыл бұрын
cool man i like it
@IulianMan5 жыл бұрын
Thanks man!
@colinhannan76894 жыл бұрын
Its fantastic, can you please send me the template
@muhammadsahfarnaoma62256 жыл бұрын
That torch for smoothing the grinded surface??
@IulianMan6 жыл бұрын
You can use whatever blows the flame even a cigarette lighter.
@muhammadsahfarnaoma62256 жыл бұрын
Thanks.. You help me.. 😊😊
@MrTravelMrTravel6 жыл бұрын
whr u got this remote nd wireless circuit box?
@IulianMan6 жыл бұрын
Hello I bought the controller from a LED shop. But you can also find on various sites. It is called RGB LED Controller
@ktheredfrog5 жыл бұрын
So cool but half...s the base needed to stain an varnish
@IulianMan5 жыл бұрын
you're right I should have done this.
@ayo8946 жыл бұрын
How did he cut those acrylic glasses someone pls reply me
@IulianMan6 жыл бұрын
Hello I cut them with an electric saw at low speed But you can also use a small hand saw with small teeth
@maazukhan11636 жыл бұрын
So sweet
@pratikgangraj49616 жыл бұрын
Boss what we call to that tool which you used to draw the template.
@IulianMan6 жыл бұрын
hello, Mini Drill and Diamond Ball Drill Bit
@anthoniolibuffon10046 жыл бұрын
laviola
@chantibabuyeluchuri60726 жыл бұрын
Good presentation,, nice
@IulianMan6 жыл бұрын
Thnaks
@PrinceSingh-fn1vy6 жыл бұрын
I want this to buy. What is the process???
@IulianMan6 жыл бұрын
Sorry, but it's not for sale. You have to make one yourself. Sorry
@gilbertmaranan37015 жыл бұрын
What material you used in designing the glass?
@IulianMan4 жыл бұрын
its acrylic glass The Program for dessing is corel draw
@mohammedjaber25176 жыл бұрын
👍🏻 good video ... hope to see more nice ideas
@IulianMan6 жыл бұрын
Thanks I will try
@elietziryescargomez80224 жыл бұрын
Felicidades excelente trabajo
@casaartesanaltont31465 жыл бұрын
Awesome!
@IulianMan5 жыл бұрын
Thanks!
@jorgeparra90585 жыл бұрын
Man, use protection glasses. You never know one eye gone for nothing!
@IulianMan5 жыл бұрын
Hello, You are right I'll use it Thanks
@taherakhatoon31934 жыл бұрын
Awesome....hard work
@IulianMan4 жыл бұрын
Thanks!
@ichsannursetyako56954 жыл бұрын
Good idea....awesome hand made...
@IulianMan4 жыл бұрын
Thanks!
@lucianapp29045 жыл бұрын
Maravilhoso!
@IulianMan5 жыл бұрын
Thanks!
@mdforhad-if1nq6 жыл бұрын
nice
@IulianMan6 жыл бұрын
thanks
@malucleffs69896 жыл бұрын
Muito legal
@IulianMan6 жыл бұрын
Thanks
@jshabib41596 жыл бұрын
wow
@GauravSingh-dz8lm6 жыл бұрын
Aap images kahan se download kari thi
@TheCherrybuster4 жыл бұрын
Why am I watching this, I don't even have a girlfriend?
@nandhinichokkanathan13476 жыл бұрын
R u selling it If Wt is the cost
@Opto_Absorver5 жыл бұрын
this is great.. can you tell me by which machine you write on the glass plate?? is it drill machine??
@IulianMan5 жыл бұрын
Thanks! Mini Drill with Diamond Ball Drill Bit to scratch the glass
@katanasinsombra5 жыл бұрын
Hola muy bueno. Mi pregunta es , vidrio o acrílico?... Disculpen la pregunta, pero no me doy cuenta que material es. Gracias
@IulianMan5 жыл бұрын
Hola, acrílico Thanks!
@CamilaRodriguez-nm1gl5 жыл бұрын
Donde se consigues los acrilicos
@jesusvazquezlopez44816 жыл бұрын
Hola.esta técnica se puede hacer en cristal o vidrio.gracias
@IulianMan6 жыл бұрын
Hello I think yes can be done
@EricFranksSon5 жыл бұрын
Very creative. Nice job
@IulianMan5 жыл бұрын
Thanks!
@akshaythakur83906 жыл бұрын
Must reply me... What is the name of that colrful remote control light?? And that material on which you have written..
@IulianMan6 жыл бұрын
Hello, the name is : RGB led controller Acrylic glass
@IulianMan6 жыл бұрын
Hello, the name is : RGB led controller Acrylic glass
@akshaythakur83906 жыл бұрын
Thanks man!!
@maidaardayaestrada22846 жыл бұрын
que agradable trabajo gracias por compartirlo.
@IulianMan6 жыл бұрын
Con gusto, me alegra que te guste.
@shafhat__minecraft__89405 жыл бұрын
👍👍👍👍
@miracleboy57196 жыл бұрын
Fantastic... Mind-blowing.... Can u help me to make this....??
@IulianMan6 жыл бұрын
Hello I can help you with the template. If you want to write my email address
@RicKoUnoOficial6 жыл бұрын
How arrive the light on the border of the Crystal? Is for the flame?
@IulianMan6 жыл бұрын
sorry but I do not understand what you mean
@RicKoUnoOficial6 жыл бұрын
Iulian Man how the light reaches the edge of the glass?
@dancoholic36686 жыл бұрын
i really want to know where can i buy that led stripe. Can someone tell me please? It is really good idea thnx :)
@IulianMan6 жыл бұрын
Hello from a store selling lights, bulbs or even aliexpres, Amazon Thanks.
@dancoholic36686 жыл бұрын
ok thanks!
@Kartik-rf3nf4 жыл бұрын
Very great job sir😍😍👍🏻tum mere liye banake de sakte ho kya sir
@IulianMan4 жыл бұрын
Thanks!!!
@pamelaquisperojas12296 жыл бұрын
DE LUJO FELICITACIONES
@anthony79494 жыл бұрын
Saludos , que material es ?? Acrílico!! Y dónde lo consigo,? Al igual si puedes decirme de las luces también dónde las consigo , saludos desde México.
@IulianMan4 жыл бұрын
hello, well you can find them at your local building store, Yes it is acrylic
@ddsl5 жыл бұрын
Which type of machin used? Can be made any other machin for drowning on acrylic sheet
@IulianMan5 жыл бұрын
The machine is called Mini Drill with Diamond Ball Drill Bit to scratch the glass You can do it with other machines, but those are the harder to keep in hand.
@elietziryescargomez80224 жыл бұрын
Solo una pregunta las plantillas en dónde las concigo? Hay alguna página web especial?
@IulianMan4 жыл бұрын
write me an email address and I'll send them to you
@Muraree1006 жыл бұрын
Best....
@skrikwolf97016 жыл бұрын
Hi, why did you remove the silicone layer from the RGB lights?
@IulianMan6 жыл бұрын
Hi! For cooling, Led bands that have silicones are for outdoor-moisture. I said that if the space is almost closed, the air will get better at the LED