this is a review of the master grade gundam model kit, V2 ver KA from the series victory gundam.
Пікірлер: 130
@Isteak808 жыл бұрын
When a man who's made 124 master grade gundams says something is EXCEEDINGLY COMPLICATED, I take it seriously O_O
@patrickvincentaquino32958 жыл бұрын
+Isteak80 Hell yeah we should. I experienced it first hand with the RX-78-2 3.0's elbows. Such a pain :))
@irfanpratista63448 жыл бұрын
+xxnike629xx so jabman wanna build pg oo raiser,wow
@elblaise56188 жыл бұрын
+Isteak80 Right on.
@twilight_phantom29698 жыл бұрын
xxnike629xx throw in the R3 as well and you've spent right around 1000$+ on PG exias.
@twilight_phantom29698 жыл бұрын
xxnike629xx and don't forget the astrea
@MisterSouji5 жыл бұрын
I'll hold out for the rg... wheres my microscope...
@MrChiron128 жыл бұрын
"So much better than the Victory" I loved the Victory man, and now you sold me for this one.
@jabman0258 жыл бұрын
+Chiron well I thought the victory was kind of a train wreck......so keep that in mind
@MrChiron128 жыл бұрын
It really was to be honest. I super glued the main body.
@BlitzkriegOmega8 жыл бұрын
+jabman025 at least the HGUC was a good kit. but that didn't transform.
@twilight_phantom29698 жыл бұрын
+jabman025 what was your 100th mastergrade?
@Outlaw89086 жыл бұрын
I did not have that many problems with it. Though I will say it was over-designed.
@Huyvovo9038 жыл бұрын
I love building this kit. It was so damn fun! Personally I've built 20-something MGs myself and I don't think the build is that complicated as long as you pay close attention to the manual. Overall it's worth every cent of the 40 bucks I spent on it. I hope they'll release the assault buster pack soon (probably p-bandai) and in the mean time I'll try the core booster's accessories on it.
@Monvo7078 жыл бұрын
Dont care about articulation because having built MG unicorn and Zeta 2.0 i just admire the sheer beauty of the kit so this is really fine. Im glad that we finally have a MG V2 after so long.
@ghanighetok8 жыл бұрын
you have no idea how much i'm looking forward to your review of this.
@austinXDFtw7 жыл бұрын
i was reluctant to get this kit because of all the negative things I have heard about it. ended up getting it as a gift and built it, I have to say I don't understand all the complaints. The kit went together smoothly and posed just fine without any of the parts popping off or weapon holding issues I've heard. interestingly I moved to a new place recently and out of my 14 master grades, this and my sazabi ver ka were the only kits that didnt grenade in transport. it even held its pose quite well. My thoughts are its a fantastic kit over all but for the love of god get it an action base.
@lucywu84847 жыл бұрын
You must have some kind of perfect v2
@austinXDFtw7 жыл бұрын
The Retarded bookbinder maybe I got lucky, I usually just pose my kits and let them sit on the shelf looking awesome, but this thing is nowhere near as finicky as my mg Epyon
@fishpop6 жыл бұрын
I recently built both Ver Ka Victory kits. They were a faff but not as much of one as the other Ver Ka i built recently. That kit being the Sazabi. The big git took me all day to build.
@clayscustoms20508 жыл бұрын
thank you, jabman, you do the best damn reviews on KZfaq
@blackneno8 жыл бұрын
I wouldn't say the waist section "exceedingly complicated". It's a matter of paying close attention to the manual and the pieces. It's a job well done for a transforming kit. My biggest complaint: The nose, start from the cockpit canopy, is very loose. It does not stay in place unless you stiffen up the connection... It was a fun build though. The complications make the build process a lot more interesting. It's not a straight forward build: torso, head, arms, legs, etc. You build enough master grades and you begins to "guess" how things go together. This one, manual is your only hope.
@rossgagne54948 жыл бұрын
nice just picked this up yesterday and added it to my backlog, great Vid as always my brother, looks like a fun build
@xxnike0629xx8 жыл бұрын
+Ross Gagne "...and added it to my backlog..." Backlog..lol. Yea. I have quite a backlog of kits that it's looking more and more like a box fortress.
@rossgagne54948 жыл бұрын
Right.. haha Mines getting pretty close like 30 hgs and 10 mgs and a slew of builders parts and other random stuff. My wife hates it, but she has her shoes I have my gunpla. Haha
@rossgagne54948 жыл бұрын
+xxnike629xx you got the right. family first
@areasevenpro8 жыл бұрын
I wonder if the Assault and Buster parts of the old 1/100 kit are compatible with this one.
@matteste7 жыл бұрын
For me, the armor on the side of the ankles are rock solid but instead the white section of the foot that connects into the balljoint loves to come loose. Also I just wonder, how are the decals affected by the transformation? Are there any significant wear and tear on them cause of it?
@Mustangman03gt8 жыл бұрын
So I don't know if I've just completely missed them or not, but I haven't seen comparisons between the MG and original 1/100 (HG?) . No mention of compatibility of the Assault/Buster packs either. My MG V2 should be here in a few days so if I haven't found any by then I'll snap some pics. Also BOOOO on P-Bandai effect parts.
@Arrowdodger8 жыл бұрын
I think I'll admire this kit from afar, and just buy the HGUC Victory 2 if I got the itch. I collect primarily 1/144 kits anyhow.
@samshji8 жыл бұрын
I'm a fan of Victory and v2 but it is sad the kits are hard to finish. Im no mg expert i currently have epyon, Nu ver ka, and Freedom 1.0 Jabman what are you thoughts on Freedom 2.0?
@Brandon-vp1if7 жыл бұрын
dope gundam. have you built the original victory gundam ver ka? I love both victory 1 and 2. was just wondering which was the more quality kit.
@ValkyrieThunderbolt7 жыл бұрын
Hey Jabman025 do you think Bandai will ever make the Assault and Buster add on packs for the V2?
@Sircinus30058 жыл бұрын
Holy crap didn't even know this existed! Next paycheck here I come!
@Eucep8 жыл бұрын
Yeah, hearing this, some replacement hands might be a requirement.
@Mafty067 жыл бұрын
sometime I wonder what bandai was smoking when they were designing the hand. some mobile suit can not hold their weapon at all
@GundamFan5208 жыл бұрын
O well R i guess I the G master grade I of N twenty-fifteen is...
@MythicalPhoebe8 жыл бұрын
the elbows and arms always give me a hard time. the elbow always comes off for me, because it's not the secure double jointed elbow we are used to seeing.
@tardislord028 жыл бұрын
hey Jabman! I was wondering if you had the master grade Gyan? and if you could do a review? I've been looking into it and there are no reviews for the guy??
@exordium92234 жыл бұрын
tardislord02 well he has it now only 4 years later! :)
@MythicalPhoebe5 жыл бұрын
this gundam cannot even hold up a beam saber. i don't know why, but on mine, and i'm sure i'm not the only one, the elbows are EXTREMELY weak. it isn't built on a double joint sandwiched between two pieces like it normally is. it's made with a kind of hook, and it does not stay on. every time i bend the elbow, it falls off. i've had this thing pretty much since it was released, and i have it standing there. i dont bother posing it. it cannot hold anything.
@elblaise56188 жыл бұрын
Damn you +jabman025 I was going to walk away from this kit but you had to throw down the gauntlet.
@padenstewart7817 жыл бұрын
I know its a bit late but does the v dash work with this kit
@Arrowdodger8 жыл бұрын
I hope some aftermarket hands can help out some. shame the transformation, while done so well, is at the expense of the final mobile suit.
@omniskull19878 жыл бұрын
Quick question. Do you recommend the mg Sinanju titanium finish and the mg Unicorn HD color+cage?
@suyo33808 жыл бұрын
I would just go with the OVA Versions of both. If you want the Sinanju TF for it's color scheme, I would just suggest spray painting it. For Unicorn, if your just going to have it in one pose (unicorn mode), just get what you want.
@rv_968 жыл бұрын
Nice review👌👌
@ORLY9118 жыл бұрын
Thanks for the vid, I'm glad I just got the HGUC Assault Buster lol. Too many Katoki stickers, no good posability and being complex as sin to build is kind of a turn off for me. Core fighters look nice though, and the snyper unit. ...Jeez, i wonder how complicated a real grade of this would be.
@bryanf38393 жыл бұрын
Hey jabman, was wondering if the cockpit when in Gundam mode can be displayed like the victory mg ver ka?
@jabman0253 жыл бұрын
in gundam mode no
@HidaAtarasi5 жыл бұрын
Dear Jabman, you're a friend to painting, and I've heard that painting tightens up loose joints. When you point out loose connections, are you staying true to the pros and cons of a straight build, or do you dislike tightening up joints with paint?
@jabman0255 жыл бұрын
A little bit of both, if you're a straight builder it's a problem you will just have to live with, if you are a painter its just one more thing you have to do.
@intorsusvolo78342 жыл бұрын
I like NASCAR decals on a mobile suit :9
@user-lynKx2 жыл бұрын
I didn't know mobile suits had so many sponsors lol
@striker08 жыл бұрын
You said that this was the most complicated MG you've built to date. In regards to that, how does it compare to the MG Banshee in terms of assembly? Reason I ask is because to me so far the MG Banshee was ridiculously complicated.
@MrNotgoth8 жыл бұрын
+striker0 I've built this kit and the MG Unicorn which is similar to the Banshee, and I'd say this is more complicated when it comes to assembly. When it comes to transformation though? I'd say they're even, with the V2 having a slight lead
@brianjaytakumi92307 жыл бұрын
Beldandi 😍
@junjundario7 жыл бұрын
hi.. does the eyes have LED features?
@jabman0257 жыл бұрын
no
@MythicalPhoebe8 жыл бұрын
i had no issues with the waist. js.
@MahoganyBlack8 жыл бұрын
haven't finished this yet because the decal are taking forever like you said! but they do look great. I feel like this build isn't too bad so far for me. The one MG kit i feel i had a lot more of a hard time building was my MG Unicorn Phenex! that kit convinced me to never buy a MG or PG of the unicorn kits! as cool as it looks, that inner frame is a bitch to build in my opinion.
@sgtkaruro6998 жыл бұрын
shit should have seen this before ordering my victory 2 O_O
@deckiner22993 жыл бұрын
Built it and found out it wasn’t a really difficult build. In fact it was pretty easy.
@dylanbove7 жыл бұрын
Hey man, I know timing may be off since you posted this over a year ago, but I just finished building my V2, was really pissed and discouraged about the arm problem.. I couldn't help but mess with it some more and figured out how to fix it!i I was wondering if you ever messed with it any further and fixed it yourself? If not lemme know!
@wyattroberts41827 жыл бұрын
Dylan Bove, hey bro do you mind shedding some light on how you fixed the arm?
@dylanbove7 жыл бұрын
wyatt roberts I just attempted my first KZfaq for ya! Go look up "Master Grade Victory Two Gundam Ver. Ka Arm Issue Solved" and I attempted to explain. 2:50 should be the direct explanation. Lemme Know if it helps
@parkerbreitenbach60618 жыл бұрын
Can u review a traxxas slash
@davidecaliendo43758 жыл бұрын
i' m the first one, dude is's so unreal :) thanx for the review man!!!
@venonat807 жыл бұрын
just finished building mine. 3 hrs to build the model and 9 hrs to put on the 350+ water slide decals....lost a few on the way. Decal setter is a must. I'm not looking forward to building the MG full armor gundam ver ka. It looks like it has even more water slide decals >.
@SenoPutra168 жыл бұрын
how do you make the decal stick so well?
@jabman0258 жыл бұрын
+Rahmat Seno Putra micro set decal bonder
@SenoPutra168 жыл бұрын
is it the same as mr mark setter or mr mark softer?
@Mr___Fozzy8 жыл бұрын
Any IBO kits on the horizon Jabman?
@xxnike0629xx8 жыл бұрын
+Fozzy Well there's that High Resolution Barbatos that is basically a mix between Metal Build and Master Grade, but has a Metal Build/Perfect Grade level price. It looks pretty cool, but that price is a bit much for me and I'd rather wait for a Master Grade.
@Mr___Fozzy8 жыл бұрын
+xxnike629xx oh I know but meant if jabman would plan to get or review.
@gunplanut8 жыл бұрын
Challenge accepted!
@suyo33808 жыл бұрын
+gunplanut Oh... I know you.
@MahoganyBlack6 жыл бұрын
My V2 holds the beam rifle. I have the rifle lean toward the fingers and let the thumb hold it in place. I like this kit but it’s articulation is horrible and not a lot of posing actions.
@MrNotgoth8 жыл бұрын
I've built this recently and I absolutely love the V2; one of my top 5 Gundam designs. However, when jabman says it doesn't pose...it does not. pose. At all Ball and socket joints for the legs and feet are super disappointing as someone who has built the HG V2 which has infinitely more poseability than this (which is to be expected, but is an extreme difference in this case). Again it's to be expected, but there is also no waist articulation whatsoever due to the corefighter gimmick, which is a huge aspect of posing kits that is just totally out of the equation. Sigh, sorry for the rant, but man was I disappointed after I built this thing. It's my first transforming MG, so I don't know how much better this is than the Victory, Zeta, Delta Plus, etc., but it was definitely an eye opener, for sure. I've yet to try to separate it into each fighter component, so I'll take jabman's word for it that the transformation is the best aspect of the kit. But I'll definitely agree with his opinion that this is one hell of a transforming brick (good or bad depending on the builder)
@Monvo7078 жыл бұрын
+MrNotgoth I dunno Ive built the MG Zeta 2.0 and that has minimal posing. The best it can pull off is the aile strike pose and even then it's not the best. Transforming Kits are meant to just look good on display and nothing else.
@gtafan1100108 жыл бұрын
Would prefer a version of this without the transformation, for a more stable figure. It's such a small aspect of a gundam. I prefer my kits to also be play ready when done, which this isn't.
@smoldream29086 жыл бұрын
gtafan110010 well, there’s the HGUC V2, if you want that, if you are okay with the smaller size and other HG qualities
@iBLACKMORAL5 жыл бұрын
I don’t really think it was all that complicated, I always buy cute looking gundams and I look them up online after buying them, I bought it because it looked pretty and I made her pink baby blue and yellow and added some cool stuff and it only took me a weekend, no disrespect but just saying if anyone is avoiding this kit because they think it’s gonna be hard
@kairellim50948 жыл бұрын
It's a shame this thing can't pose. I really like the V2, but having basically immobile hips is a deal breaker.
@BlitzkriegOmega8 жыл бұрын
I can't wait to see this kit have to take on the load of a Giant backpack and Giant weapons...and Giant Armor overtop its original.
@Ascension.z6 жыл бұрын
Here I am expecting that the master grade would be better than high-grade I was wrong you want to victory 2 get the high-grade
@yugivira42928 жыл бұрын
*cough* origin kit of the year for 2015 *cough*
@perryaaron78715 жыл бұрын
Its hard on the fingers
@Ascension.z6 жыл бұрын
If only the legs could spread out I would buy this but I cannot
@HybrydATP646 жыл бұрын
Everything UC here Ex-SEEDingly complicated Tiny tiny pieces for that upper ZECHtion there
@Kefkaownsall8 жыл бұрын
wish it came with the wings of light
@xxnike0629xx8 жыл бұрын
+Kefkaownsall Well, Bandai has as Premium Bandai add on set that comes with the pink and blue effect parts. =) I would probably try to get one now, before it is sold out and then posted up on eBay at like 10x the price..lol
@Kefkaownsall8 жыл бұрын
+xxnike629xx let us hope the assault buster parts don't go the same way
@xxnike0629xx8 жыл бұрын
Kefkaownsall If we see Assault Buster MG, I think it will be a Premium Bandai add on kit or add on parts set
@samshji8 жыл бұрын
+Kefkaownsall And AB armor for P bandai. :/ God dang it bandai! Whyyyyy!
@ryuuohdeltaplus79368 жыл бұрын
+Kefkaownsall The wings of light is already announced as a P-bandai exclusive Now about the Assault Buster parts...Well you can already guess
@UC1180_4 жыл бұрын
The HG 1/100 was so much better. Much more stable and so much less complicated
@wolfgangervin25828 жыл бұрын
Anyone else get the oaomt joke?
@MythicalPhoebe8 жыл бұрын
the legs on this kit were the only things stable.
@Altairfan4418 жыл бұрын
Yeah I think I'll pass on this kit. Not just because I've only built one mg, and if I tried attempting this, I'd rage so hard, but mostly because I personally don't like the victory and v2 gundam. always felt too toy like and not enough mecha to me.
@a06cc7 жыл бұрын
The legs are by far the worst part to build imo. That waist section was cake walk. Legs have pieces that keep pooping off
@ThuyNguyen-ek4pz8 жыл бұрын
I hated that bandai made the wing of light a stupid P bandai exclusive it like slap in the face to all fans like what they did with MG Altron.
@sonymulia91438 жыл бұрын
the articulation seems really sucks.. i almost bought it hahaa.. it's too much hassle for me..
@snap_fit86868 жыл бұрын
A pain in the ass kit, but the v was even worse, i hate this kit.. that is what im geting, but you dont want to say it out loud.
@jabman0258 жыл бұрын
+Fshop fshop no not really, I enjoyed the challenge that being said if I had the opportunity to build this again........I'm probably going to pass
@wyattarthur52758 жыл бұрын
Why are all the V Gundam kits total Shit LOL
@crankyboiy7 жыл бұрын
i dont get why bandai make weapons that can't be held. so dumb.
@tomlucaj4138 жыл бұрын
i would rather watch seed destiny then buy this piece of crap
@stanlee2200 Жыл бұрын
I know of noone who uses or displays their gundam in the transformed version..i see no reason why they even have the option. Most of us paint these and display them and after painting transforming them is impossible.. what a waste of time and engineering just to match the anime..everyone knows the gundam form looks rhe best and is how it is supposed to be displayed....if i wasntes to display a plane id build a macross..
@sgtkaruro6998 жыл бұрын
shit should have seen this before ordering my victory 2 O_O
@sgtkaruro6998 жыл бұрын
shit should have seen this before ordering my victory 2 O_O