I never tried anything like this before. I ordered what you showed in the video and followed it step by step. I am a mechanical engineer and I am a little technically savvy, but I think anyone could do it. Thanks for making it easy.

Followed to a tee, the chimes in the truck were almost in sync with your truck in the video lol. I had to swap my cluster in my 06 stx due to it malfunctioning with the classic loose solider joints issue, which I had repaired once before couple years ago. One of my employees wrecked my 07 xlt so I just had a tach cluster anyway on hand, but I needed to be rid of the compass/temp/TPMS system in the program. Worked like a charm with all items and instructions. Thank you

Glad I found your vid..I have a 07 xl and access to a 08 FX cluster..Very simple change out..Just need a bud with a computer programer.. Probably the ford dealer...lol..Thks good commentary and clear instructions..

Thanks for this video, i was able to swap mine with the use of your video, worked like a charm.

Gracias, soy mexicano y tu video me soluciono un gran problema Xl 06 to FX4 08 Thanks!!!!!

Do you know if I can change one like the new one you installed for one of the ones that have the gas meters and others but in the middle with this same procedure?

Upgrde? Like PRNDL? Lol! Thanks for another great video, from a DIY to a DIY!

Wish I could do that to my 00 Grand Marquis. Great Video as Always!

Great Video. I am about to change my 2003 HD F150 from kph dash to mph dash. Hopefully, this works for mine.

Genius. Is he saying FORSCAN or FORSKIN tho?

I was just told from a garage that to fix my gauge issue, I would have to have my truck recalibrated at the dealership and it would cost me $1000+. I’ve watched these vids and this looks relatively straight forward. Is it permissible to go back there and whip them with a stick for appearing to have boldly lied to me LOL?

I've got an 06 F150 XL, the dome lights never worked, nor do the cargo lights, the door ajar message does show when the doors are open, there is no power at the dome light and cargo light sockets, crazy thing is when I switched out bad third brake light housing with LED's, the computer went bonkers, every relay in the fuse box was rapid clicking, the truck wouldn't start, and the PATS light was lit solid, I had to switch the cargo bulbs back to regular bulbs to get the truck back to normal again, this ruled out a switch or wire harness issue at least. I've been having issues with the odometer backlight working when it wants to, also the ABS and e-brake like stays on all the time. Would replacing the cluster resolve this?

Guessing same works for 04. We have same dome light, Ford dealership said they've never seen that style. Mine is full of nicotine from it being a construction vehicle

What do I do if it doesn’t show me that I have to put the key in the on position

Great Video!!! However, I had a couple glitches. I upgraded from 2004 STX to a Lariat gauge cluster. After loading original gauge profile (STX) all appears ok except door ajar, dome light doesn't work, and temp gauge is inop. (Which I know isn't connected. Everything else works great. What can I do to get dome light to work and door to chime?

I just completed this change out in my 06. While I was looking for some information about this I came across this video. Everything works perfectly so far except when I turned the truck back on the mileage was not what was on the cluster but what was on the one that I bought it didn’t change. Is there a way to correct this using FORScan?

Will this work for my 2000 f150, new cluster plugs right in and turns on but the truck itself doesn’t it just cranks but doesn’t start

Does the Forscan program have bi-directional capabilities, using the laptop version?

Greetings, and I read in one of your comments that the gear lever below doesn't work if it's the gear lever above. I have one that had the same one you took from that one and I mounted the Lariat one. The air does not work and obviously the doors. can it be reprogrammed and it will work or would it waste time?

Will this work for changing the ac to manual

Which do I need to download, there's a v1 and v2

Damn, I was about to make all of the mistakes 😂

What open source software are you using? I want to swap my STX cluster to and FX4 because I already have one. Thank you

I have a FORD 2005 XL 4.6L V6 with the stock cluster, I would like to upgrade it with a tach as well, can you recommend one? and where would I get one?

Can u program a xlt to lariat cluster with ford scan

I have an issue with the Forscan, I've became a subscriber, but couldn't save the data from my original PCM, could you kindly help, I have a 2004 Ford f150 XLT, trying to upgrade to a 05 cluster.

My dash light comes on, but the cluster light for the miles do not come on, at night I cannot see the numbers only during the day. What can be the problem?

Hey your rev meter automatically works. You don’t need to by any sensor?

the a/c also works ?

will the original cluster without tach work with the new cluster with tach ?

Thanks for the video, cant wait to try this out! I have the same cluster but its been sitting collecting dust lol. Did you ever figure out how to change the Milage? My Original has 241k and Swap has 120k, Big difference for Inspection to notice lol.

Can I also use a lariat cluster

If you have an xl would putting a lariat cluster in work as well?

Mahalo for this video. Just got me a cluster with tach and will be purchasing this forscan so it works properly. Also would the dealership be able to correct the mileage for me?

Did the miles swap over?

My 2007 STX came with the factory tach. Probably cause its a 5 speed truck, every auto XL/STX Ive seen is the non-tach unit

Do I have to program it

anyway to do this with them both out of the truck?

Can we get the tempature outside to work?

Hi Do you know if this will work on a FX4 instrument cluster?

Thanks for the information about swapping the IC on my F150. I have an issue, everytime I write the old data into the new cluster it doesn't change the mileage. I save couple files of the original cluster and took photos of the registry to make sure is not corrupted. Any ideas why it doesn't want to chsnge the mileage.

Will the cluster work if i just plug and play without programming?

What if u don’t have the original cluster

Hi. I have a 2005 f150 xlt. Wanted to upgrade the cluster to the one of a lincoln mark lt a friend of mine gave me. I have read that the ac wont work if i do. But since i found your video it has given me hope. Any thoughts if it ll work?

Love the video - what would you do if you had a broken cluster though? Mine broke, i got an fx4 cluster but configs don't match, no idea where to try and get the config =__-

Hey do you know if the FX4 dash is plug in play as well ?

Where did you buy instrument cluster?

Has anyone made th attempt on swapping 04 with a 07 white cluster.? Shit", everything works the same except for my AC!? What do I need to swapp my manual ac to the digital ac and with just the basics!?? I do have the cluster trip buttons I got from parts yard and also grabed the in cab sensor becouse I read someone's post somewhere saying you need it.?? I just need my AC going I live in the desert and it's going to be hot as he'll soon!!!??? Looking for a hand??✊😁

Can I do this on any laptop?

How is this upgrade 😂

I bought the unit and upon trying to install the driver's from the provided website I found there is none, every link is just an empty PDF file, so needless to say I wasted my money on this POS! And trying to contact the company is a joke, they provide a page for questions and trying to send the message results in a error in Chinese. AVOID THIS PRODUCT LIKE THE PLAUGE NO WAY TO MAKE IT WORK AS YOU CANNOT GET DRIVERS ANYWHERE