Пікірлер
@erickfabela212
@erickfabela212 Сағат бұрын
Currently dealing with this bouta try it! Thanks ❤
@stevesinclair8667
@stevesinclair8667 7 сағат бұрын
Thank you! Thank you! Thank you!
@j.p.2764
@j.p.2764 18 сағат бұрын
I have a 2012 f350 XL with manual locks and my keys have no controls on them. I assume I can't add remote start. Is that correct?
@brianmacy8454
@brianmacy8454 23 сағат бұрын
Thinking this is my problem as well. No crank no start, replace starter relay...thought it was fixed, because it started for a while? Then issue returned. Would it sporadically start if this relay was bad? or going bad? Do these relays stick and then release? Sorry for all the questions...just hoping I got the problem.
@patriciafoleyburke9952
@patriciafoleyburke9952 Күн бұрын
I have this issue with my 2018 For F150 and the dealer is acting like this is something they can not figure out and they may need to take the steering wheel apart etc. I left it in the morning and called at 4pm and they 'haven't figured it out'- shouldn't they be able to figure this out as quickly as you seem to have? I see a bill for big bucks coming!!!!
@JackofAllMasterofNone
@JackofAllMasterofNone 22 сағат бұрын
What is the problem that they are fixing?
@g.taylor23762
@g.taylor23762 Күн бұрын
I have a 05 style grill for mine but I unfortunately screwed up my header panel doing a conversion of another video could I just install the 05 header panel with the 05 headlight and still use my stock 03 bumper and 05 style grill
@ethelperry4529
@ethelperry4529 Күн бұрын
Appreciate YOU & Your info Soo much ❣ ep🐢
@lethargicstove2024
@lethargicstove2024 Күн бұрын
I got the flashing light but the chime never turned off
@rolandfemenias8241
@rolandfemenias8241 Күн бұрын
donde esta el egr en este modelo?
@SuperSolomaniac
@SuperSolomaniac Күн бұрын
Hi, I have a 2016 CRV that already has DRLs but no projector. Does that make this a direct swap? Thanks.
@DougYeager
@DougYeager 2 күн бұрын
Imagine driving down the road and having one of those punch out panels blow out...
@SuckItYouTube19
@SuckItYouTube19 2 күн бұрын
Simple risk reducer.... put a piece of scrap wood between the solar panel and its frame when using a drill to make those holes.
@ShowMeWhatINeedToKnow
@ShowMeWhatINeedToKnow 2 күн бұрын
NO BODY MAKES GOOD CARS ANY MORE! NO BODY! Not even Toyota. It's all JUNK. ALL OF IT!
@alejandroolalde4132
@alejandroolalde4132 2 күн бұрын
hi did you add the digital cluster to the truck too I would like some info
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
kzfaq.info/get/bejne/oMmPZLdqvta2aHU.htmlsi=6M2NpTXLI9PjCXmJ
@DoggyU
@DoggyU 2 күн бұрын
Beautiful build and tour!
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
Thank you!
@DoggyU
@DoggyU 2 күн бұрын
Great video! I had two different promaster, and am now going for a transit for the AWD option.
@seymourbutz6551
@seymourbutz6551 2 күн бұрын
Ideally i want my back up in the small screen
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
If you have a stock backup camera it will stay in the small screen and will not show on the big screen. You have to do additional modifications to make it show on the big screen so it sounds like out of the box it will work perfect for you
@Andrew-md7ky
@Andrew-md7ky 2 күн бұрын
Great video, have you had any issues with the GPS cutting out with the antenna in that location? Has anyone reached out about upgrading on the SE and installing a shark fin for better coverage? I know they have the AM/FM and GPS combo's but not sure if the 4g combo is needed... Truly appreciate the videos, glad I found them!
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
The GPS antenna is always installed under the plastic of the dashboard even in OEM applications. The satellite radio antenna in vehicles is what is put on the roof in the shark fin with the AM/FM antenna. So yes it will work just fine under the dash as long as there's no metal between it and the sky
@Andrew-md7ky
@Andrew-md7ky Күн бұрын
@@JackofAllMasterofNone Thanks, will give it a shot. Any suggestions on a shark fin that would meet the requirements for the CRV and the Joying setup? One other question, do you install a mic with the head unit or do the mics on the unit itself suffice? I have gotten bad feedback with the stock mic that came with the previous version.
@alvarovenegas5426
@alvarovenegas5426 2 күн бұрын
I was really hoping to see you take it off all the way. I wanted to see what's under there. I bought mine salvaged and there is nothing under the rear bumper to cushion a rear impact. No rear bumper reinforcement bar or anything, just a fragile bumper cover which would do nothing in case of an accident! That scares me a bit!
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
Yeah they're supposed to be a bumper under there
@HotSourSoop
@HotSourSoop 2 күн бұрын
It's been 2 years since you made this video. How are they holding up?
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
Great .still work
@audreygarcia8272
@audreygarcia8272 2 күн бұрын
This is the best conversion i’ve seen! It’s tastefully done and well thought out.
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
Thank you very much
@davem16
@davem16 3 күн бұрын
What did you do with the engine speed control lever. Did you tighten bolt with it open at full throttle and just control the speed from the carburetor? Thanks for taking the time to make this video. @JackofAllMasterofNone
@binm3315
@binm3315 3 күн бұрын
So did they upgrade the SIM card problem I just bought the 10” with android 12 but I want to install a SIM card
@JackofAllMasterofNone
@JackofAllMasterofNone 2 күн бұрын
I'm not exactly sure what you mean by problem but the new Android 12 units do support more cellular bands in the USA so if that's what you are referring to it will work much better with an AT&t or T-Mobile SIM card
@binm3315
@binm3315 Күн бұрын
@@JackofAllMasterofNone yes that what I meant I have a Verizon SIM card hopefully it works
@alexander255110
@alexander255110 3 күн бұрын
What size crush washer do we need to replace? Is it 12mm? Were you supposed to remove the check bolt when your car is level vs on ramps?
@TooBnooBtooB
@TooBnooBtooB 3 күн бұрын
Louder than I thought it would be
@kevinkay1600
@kevinkay1600 3 күн бұрын
Can I upgrade my wj_01 ?
@mediaguy4037
@mediaguy4037 3 күн бұрын
2.0 is the best engine you can get for reliability. No turbo oil dilution on these.
@SerLio117
@SerLio117 3 күн бұрын
How is it working so far? Planning to get mine. Is there a way to disable that annoying beep sound each time you press the screen? Great video, thank you .
@JackofAllMasterofNone
@JackofAllMasterofNone 3 күн бұрын
Yes you can turn off the button press tone in the menu. Works great
@ALXMARTIN
@ALXMARTIN 3 күн бұрын
About to do a similar job on my 2016 Fusion. Hopeful it'll go as smoothly.
@anisboudraa7364
@anisboudraa7364 4 күн бұрын
hello am from algeria . what is the distance between you and the network antenna ?
@JackofAllMasterofNone
@JackofAllMasterofNone 4 күн бұрын
7 miles
@brett.c1649
@brett.c1649 4 күн бұрын
I'm no machanic so this could be dumb question. If my time chain is stretched why can't I just tighten the chain tensioner vs replacing chain?
@JackofAllMasterofNone
@JackofAllMasterofNone 4 күн бұрын
Think of the chain tensioner like a spring loaded ratcheting device, except on a CRV it has oil pressure as well to help expand it. It can only go so far. Once the chain is stretched passed the limits of the tensioner, the chain is just loose as the tensioner can only travel so far
@brett.c1649
@brett.c1649 4 күн бұрын
@@JackofAllMasterofNone rgr that
@elkekirkpatrick6481
@elkekirkpatrick6481 4 күн бұрын
THANK YOU for showing this little granny EXACTLY what to do to replace the broken idler spring on her Z335E! The recommendation in the comments to use a 3/8" drive in the square hole on the idler arm didn't get me enough tension release but taking the belt off the back pulley got me there perfectly! I used an 8" zip tie, made a loop, and pulled the end of the spring into the tab on the edge of the mower deck. To put the back loop of the belt back on the pulley, I used the claw end of a hammer. This clear, excellent video got my zero turn back into mowing! I am so grateful!
@JackofAllMasterofNone
@JackofAllMasterofNone 4 күн бұрын
Excellent
@crowlsyung
@crowlsyung 4 күн бұрын
Awesome video, thanks for sharing! How far forward does the NW conversion grey tank run on the van? I'd love to copy your install, but I'm concerned it may interfere with the espar fuel pump I have mounted to the forward most bracket on my transit 25 gallon fuel tank (exact location shown in this video: kzfaq.info/get/bejne/nbF7ftN20ZjadZc.htmlsi=T5QbCpks_iM93zjI&t=820)
@JackofAllMasterofNone
@JackofAllMasterofNone 4 күн бұрын
I watched your video and saw were you installed the pump. I can't guarantee anything but I think you would be okay because two things. It looks like you have your pump installed on the forward most cross brace so the tank may sit behind it and also there is space between the fuel tank and the water tank. So that area where you mounted the fuel pump is actually right between the fuel tank and the water tank.
@soufinsaechao3952
@soufinsaechao3952 4 күн бұрын
Do you guys do build for other people? How much would it be to get the same build u have
@JackofAllMasterofNone
@JackofAllMasterofNone 4 күн бұрын
We do not. Sorry
@craigcinca
@craigcinca 5 күн бұрын
Where did you find the smooth FRP? Box stores here only have the dimpled texture.
@JackofAllMasterofNone
@JackofAllMasterofNone 5 күн бұрын
It was at Menards
@tiedye1631
@tiedye1631 5 күн бұрын
I replaced mine it wore out like in 3 days
@JackofAllMasterofNone
@JackofAllMasterofNone 5 күн бұрын
The new seal did?
@user-jl4cm2fo9j
@user-jl4cm2fo9j 5 күн бұрын
Thank you, this video is very helpful!
@yellowjacket3840
@yellowjacket3840 5 күн бұрын
I bought my 100' Sewer jetter hose with all the tips and fittings for a standard pressure washer handle so theres really no need to place a shut off on the pressure washer at all if you have M22 fittings it will connect with a M22 reducer
@Offthegridfishing
@Offthegridfishing 5 күн бұрын
My toilet got clogged from my wash braking and me having to hand drain the water by hand now my toilet won’t flush and won’t get unclog by anything any suggestions thanks
@StarknightMT_official
@StarknightMT_official 5 күн бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Mid-Panel Soft Rear Window for your Honda Pioneer 1000
@diegosoto7561
@diegosoto7561 5 күн бұрын
Hi Where are you located do I need to put that in my transit 2020?
@hijrathemat1074
@hijrathemat1074 5 күн бұрын
hi i hope your doning will I am really looking to buy crv can you tell me wich year and wich model is the best i like sport one please tell me wich one is good
@banggoodtruck-officials847
@banggoodtruck-officials847 5 күн бұрын
Saludos tienes el enlace de tu radio en Amazon, ? Está muy bonita me gusta para un CRV 2014 que acabo de conseguir 🎉 buen video 👍
@fruitinspector6111
@fruitinspector6111 6 күн бұрын
I like how you first got your drain pan and put it in the way of sticking the ratchet drive and not a socket into the 3/8 plug hole. I just did this on my wife’s car on the ground and I did not need a breaker bar to break the plug loose because I was able to pull from the centerline of the ratchet to the front of the car. Oh yeah, I didn’t have a oil drain pan in my way!
@Carlcarterjr
@Carlcarterjr 6 күн бұрын
Dude!! I followed the procedures in my owner's manual for disabling the minder on my 2024 Ford Maverick, but it didn't work. I've tried everything I could find on line nothing worked. It looks like this worked for me, too. Many thanks!!
@gameconsumers
@gameconsumers 6 күн бұрын
Does this support Apple car play or just android?
@jamesbecker578
@jamesbecker578 6 күн бұрын
Great video. I was putting mine together today and noticed that I also was missing the bolt mentioned at 2:47. It is a black hex bolt. After calling customer service, I was informed that they do not have any, and to return the lift to the store for an even exchange. Obviously, another case of corporate idiocy. The bolt that did come with the lift is a silver hex bolt that is far too short.
@girohead
@girohead 6 күн бұрын
Never ever buy car parts from Amazon or ebay
@duymariochannel3885
@duymariochannel3885 6 күн бұрын
Does 2023-2024 crv do the same way?
@JackofAllMasterofNone
@JackofAllMasterofNone 3 күн бұрын
Not sure. I bet it's very similar though. Honda never changes much
@ajdoti1
@ajdoti1 6 күн бұрын
Link to the part?