JAGDTIGER - camo netting tutorial, Blitz by Takom 8003, Jägermeister, GIVEAWAY!

Рет қаралды 18,339

Жыл бұрын

This kit is Blitz by Takom 8003 upgraded with Atak Model resin Zimmerit, Aber gun barrel, Master Model MG 42 and Eureka XXL towing cables.
Today you can check how I dealt with making camo netting for this beast with Porsche suspension!!!
This is the tutorial with all steps shown! Check it out!
Jägermeister is coming! :)
Jagdtiger was the heaviest armored fighting vehicle (AFV) produced and used during WW2 by any nation. Armed with a 128 mm Pak 44 L/55 could destroy any Allied vehicle. 150 were ordered but only around 80 were produced. It saw service from late 1944 until the end of the war on both the Western and Eastern Front. The enormous weight and underpower caused plague of poor mobility and lots of mechanical problems.
⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️
Support my work and be my Patreon - / coldemonspl
DON'T CLICK THIS! - tiny.pl/9g5bb
Instagram: coldemonspl
coldemons.blogspot.com/

Пікірлер: 131

@sergiopagano8832 2 ай бұрын

Sou adepto do plantimodelismo militar. Gostei das dicas dadas nesse video. Todo dia a gente aprende um pouco...

@coldemonspl Ай бұрын

No problem! Thank you very much! :)

@LsScaleModels Жыл бұрын

Great tutorial. Really adds value and a nice story to the model. Thank you.

@coldemonspl Жыл бұрын

Glad you enjoyed it! :)

@danakrause5031 Жыл бұрын

Great result. The effect from using the 3 different greens is subtle but adds alot of interest to the camo net. The netting looks great with the tarps below it.

@coldemonspl Жыл бұрын

Thank you! Cheers! :)

@the-creech4790 Жыл бұрын

That was fun! Thank you for your time Sir.

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@VIPER03100 Жыл бұрын

Excellent modeling topic,thank you!

@coldemonspl Жыл бұрын

Thx a lot mate for your comment!! :)

@treyzmodels422 Жыл бұрын

Brilliant! Thanks for sharing this great tutorial 👍

@coldemonspl Жыл бұрын

Glad it was helpful! :)

@GustavoRubioGSR Жыл бұрын

Cool netting!! As usual, a pleasure

@coldemonspl Жыл бұрын

Thank you very much buddy! :)

@jeffwilson2896 Жыл бұрын

Great work. Thanks for the great tips and keep up the good work. 👌👍

@coldemonspl Жыл бұрын

Thank you very much! :)

@johndillon8051 Жыл бұрын

Very good tutorial. Dry brushing at the end with the faded green was, to me, absolutely essential to make the netting really stand out and to give it depth. Fine job!

@coldemonspl Жыл бұрын

Glad it was helpful! :)

@granvilleporter5989 9 ай бұрын

thats so cool cant wait till i get mine

@coldemonspl 9 ай бұрын

Many thanks! :)

@RimsModels Жыл бұрын

Great video my friend fantastic tutorial on doing the netting definitely going to have a go at doing it thanks for sharing 👍👍

@coldemonspl Жыл бұрын

Thanks so much 😊

@mikeharbour835 Жыл бұрын

I never thought to use more than 1 colour when making my own camo nets...a bit of a eureka moment...thanks for the tip....

@coldemonspl Жыл бұрын

Glad it was helpful! :)

@gigr1863 Жыл бұрын

Well donne as usual Coldemonspl!

@coldemonspl Жыл бұрын

Many thx! :)

@rrl4245 Жыл бұрын

Thanks from all mankind.

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@TheWysol666 Жыл бұрын

Świetny efekt. Trzeba będzie wypróbować :)

@coldemonspl Жыл бұрын

Dzieki! :)

@haroldstewart Жыл бұрын

Great work and good tips 👍 thank you 🍻

@coldemonspl Жыл бұрын

No problem! Thank you very much! :)

@danypascali6202 Жыл бұрын

Thanks great demo

@coldemonspl Жыл бұрын

Thank you! :)

@Toni_G_Castroviejo Жыл бұрын

Awesome work! Looks top notch!! :)

@coldemonspl Жыл бұрын

Thank you very much! :)

@tomfowler4501 Жыл бұрын

Loved this very informative thank you

@coldemonspl Жыл бұрын

Thank you Tom! :)

@bravo3leader722 Жыл бұрын

The tank looks amazing!! Like every project of yours! Thanks to you I love Mondays 😄 but the crew can't get in or out of the tank! All hatches and openings are covered with tarpaulins and equipment!

@coldemonspl Жыл бұрын

Thank you very much! And Im really happy that thanks to my work you love Mondays! Please join my Patreon if you can to have more lucjy days! And the crew is out - the Jagdtiger is in "stand by" status and it's close to the end of the war so they want beer more than dying for fuhrer :)

@caulshivers7799 Жыл бұрын

That was sweet yo, thanks for vids

@coldemonspl Жыл бұрын

No problem 👍

@TheNordus Жыл бұрын

Cool video, coldemonspl. This series has made me want to try and build a Jagdtiger with Porsche suspension.

@coldemonspl Жыл бұрын

Great! Hope my videos will be useful and helpful if you start this project! :) Please join my Patreon if you can to see more content! :)

@bastelbude4100 Жыл бұрын

Wow Amazing 🤘🏻simpel Trick. I love your tricks and weather effects in your Videos 🤘🏻👏🏻👏🏻👏🏻

@coldemonspl Жыл бұрын

Thx mate! :)

@stephenbridges2791 Жыл бұрын

Nice netting. Very realistic.

@coldemonspl Жыл бұрын

Many many thanks :)

@damiansxd4765 Жыл бұрын

COLDEMONSpl nie mogę się doczekać odcinku z weatheringiem.

@coldemonspl Жыл бұрын

Juz za kilka dni albo na Patreonie gdzie juz jest od dawna. Zapraszam do dolaczenia i wsparcia :)

@coldemonspl Жыл бұрын

You are the winner! Contact me! :)

@damiansxd4765 Жыл бұрын

@@coldemonspl Dziękuję bardzo, gdzie możemy się skontaktować?

@coldemonspl Жыл бұрын

@@damiansxd4765 @

@damiansxd4765 Жыл бұрын

Wyświetla się sama małpa

@TiberiusMaximus 2 ай бұрын

Heres a good brand I found on Amazon that has a netting like make up, I haven't painted it yet but it should work. Covidien 1806 Curity Gauze Sponge, Sterile 2's in Peel-Back Package, 2" x 2", 8-ply (Pack of 100)

@coldemonspl 2 ай бұрын

👍👍👍👍👍

@tuteng3909 Жыл бұрын

I've learned more in 2 months of watching coldemonspl channel compared to university I study in

@coldemonspl Жыл бұрын

Thank you! :)

@dioramadevil Жыл бұрын

The net is next levell... Congrats ..

@coldemonspl Жыл бұрын

Thank you very much! :)

@modelcitizen6759 Жыл бұрын

I enjoyed this process and have the perfect paper panzer project ready for its application. So I'm off to raid the medicine cabinet firstly for th e dressing and to clear some space for the Laffy - a win win you could say! Thank you Demon, see you on the next one. Dave.

@coldemonspl Жыл бұрын

Good luck! :)

@modelcitizen6759 Жыл бұрын

dziekuje Lucasz

@dogforeyals Жыл бұрын

Great tutorial...:)

@coldemonspl Жыл бұрын

It's very easy, just try it! Good luck! :)

@fjdexx Жыл бұрын

Nice tutorial. thx

@coldemonspl Жыл бұрын

Thx! :)

@tankmodeller1982 Жыл бұрын

Great jagdtiger¡! And de net camo

@coldemonspl Жыл бұрын

Thank you very much! :)

@69stingrayman Жыл бұрын

Hi COLDBEMONSpl, excellent idea on the netting! Might just haveto try that on a kit I'll be building.

@coldemonspl Жыл бұрын

It's easy! :)

@Svieshnikov_models Жыл бұрын

Cool work and detail, everything is on the level as always, go ahead! Maybe I'll win the competition at least once )))

@coldemonspl Жыл бұрын

Thank you! :)

@kennethpaultargett5483 Жыл бұрын

Not even bought this yet but seriously getting excited........

@coldemonspl Жыл бұрын

:) :) :)

@bushranger900 Жыл бұрын

Have to say coldemonspl any crew I had put camo netting around intakes and exhausts would be sent to the Eastern Front and told don't look back!

@coldemonspl Жыл бұрын

Well, try to imagine that there is no crew and the vehicle is on "stand-by" status. Good explanation? I don't always make models ready for battle. :)

@bushranger900 Жыл бұрын

@@coldemonspl Fair enough

@stephensim8011 Жыл бұрын

VERY VERY GOOD

@coldemonspl Жыл бұрын

Many many thanks :)

@THROTTLEPOWER Жыл бұрын

Great work Great vid........... 👍👍

@coldemonspl Жыл бұрын

Many thx! :)

@pawelewandowski59 Жыл бұрын

Super 👍😃

@coldemonspl Жыл бұрын

Dzięki! :)

@changchienchi7220 Жыл бұрын

Thanks for sharing the modeling tips. What is the better time to build camo net on the tank, including depolying and painting the camo net? Is it better before or after painting and weathering the tank model? Thanks

@coldemonspl Жыл бұрын

In my opinion, that's when it's best for you to work with it. I put painted mesh on the model but before weathering :)

@MrSneaksful Жыл бұрын

Excellent video and ideas, thank you. Is there a certain brand of guaze that you used? I did the same and the weeve was a little looser than what you are using.

@coldemonspl Жыл бұрын

Thx mate. I use different brands and they are all the same IMO. The weeve is easy to strech so the way you will present it depends on your needs :)

@TiberiusMaximus 2 ай бұрын

pva glue is the white stuff right? like elmers?

@coldemonspl 2 ай бұрын

Correct :)

@milossacha3255 Жыл бұрын

Very nice tutorial, thank you very much. I was thinking about this possibility but regarding it's suitability for 1/72 models, which I do mostly. What do you think? Anyhow, it was impressive to see how you painted the net. Great! 😁👍🏻 Thank you.

@coldemonspl Жыл бұрын

Thx for your comment! It will be hard to find something good for 72nd scale. I have no idea what can be used for this. Hard task. :)

@milossacha3255 Жыл бұрын

@@coldemonspl :) well, yes, hard task. Thank you very much.

@milannes1574 Жыл бұрын

Very nice work. Can I use just PVA glue with water and acrylic paints? Thx I will try to make net :). Thx.

@coldemonspl Жыл бұрын

Yes, you can. It works the same :)

@milannes1574 Жыл бұрын

@@coldemonspl thx i will try it :)

@TheAdrenalineboy Жыл бұрын

swietny ! PS z czego zrobiłeś "szmaty" ? kawałki "tkaniny" ??

@coldemonspl Жыл бұрын

Hej! Wszystko powinnop być w filmie :) Oglądałes cały? :)

@TiberiusMaximus 2 ай бұрын

WHAT brand are u using bc the stuff I got falls apart when stretched, I need a good brand

@coldemonspl 2 ай бұрын

I dont understand. For what are you asking? :)

@TiberiusMaximus 2 ай бұрын

@@coldemonspl the gauze, the stuff i got is cotton and when you stretch it, it falls apart

@coldemonspl 2 ай бұрын

@@TiberiusMaximus mate, I have the cotton and falls aprart but the trick is that you need to soak it in white glue diluted with water to keep it in one piece. Of course it wont be hard and some strings will go off but it helps. :)

@TiberiusMaximus 2 ай бұрын

@@coldemonspl I found some on KZfaq just like yours in video

@robertknox1964 Жыл бұрын

What’s underneath the camouflage net to keep it from sticking

@coldemonspl Жыл бұрын

Nothing. It doesnt stick to the surface during painting. After placing on the model I soaked it with white glue and water to glue it to the surface. :)

@robertknox1964 Жыл бұрын

@@coldemonspl oh, okay thanks. I’ve never done that. But now I’ll give it a shot

@casey243 Жыл бұрын

What was the liquid at 6:50?

@coldemonspl Жыл бұрын

Tap water :)

@C3rb3rus2.0 11 ай бұрын

Did you thinned down your wood glue?

@coldemonspl 11 ай бұрын

Yes, I did a bit with tap water :)

@multipl3 Жыл бұрын

Would muslin gauze work? Can you name the product brand you using?

@coldemonspl Жыл бұрын

I'm not sure if it's be good and from what I've looked on the internet, it probably isn't. My gauze is a Polish product, which is probably produced in other countries under a similar name - gauze bandage. Ask in a pharmacy and possibly show my video to the seller, then she/he should help. :)

@laMoort Жыл бұрын

this is how you make modern art! now i don't know about history of these things but did germans use pieces of rug woven into the net here and there, something like a hessian for ex? anyway, looking lovely as it is, and no i am not interested in the giveaway btw, cheers.

@coldemonspl Жыл бұрын

Thx mate for your comment! Probably they used such things but this will be done next time! :)

@robertknox1964 Жыл бұрын

I mean sticking to the mat?

@coldemonspl Жыл бұрын

@antoniorolando1754 Жыл бұрын

complimenti ma vorrei capire il tipo di rete che hai usato , è una garza sterile, ma la grana?

@coldemonspl Жыл бұрын

Yes, it is gauze, the cheapest in the pharmacy :)

@antoniorolando1754 Жыл бұрын

@@coldemonspl grazie ma che grandezza, ci sono diversi tipi 10x10, 18x10 ecc tu cosa hai usato?

@coldemonspl Жыл бұрын

The packaging said 1m2, which is quite large. but in general, size is not important because you have to cut to fit a specific vehicle anyway :)

@oliverlazzaro3570 Жыл бұрын

COLDEMONSpl good video thanks for the tips with the netting, i will be sure to give it a try. This jagtiger build has inspired me to build one for a mate who loves jagdtigers.

@coldemonspl Жыл бұрын

Great! Thank you for your comment! Please visit and join to my Patreon to have access to extra content I publish there! Cheers :)

@modelcitizen6759 Жыл бұрын

That's Laffly not Laffy - chubby fingers

@coldemonspl Жыл бұрын

👍👍👍

@ManuDellaValle63 2 ай бұрын

Oh please…how can the crew can realistically get in AND OUT of that tank with all the hatches covered and blocked like that?You think you’ve discovered the wheel while in fact you’re just doing what the likes of F.Verlinden did when your parents weren’t even born yet!

@coldemonspl 2 ай бұрын

Did I say anywhere in the video that the vehicle represents the vehicle in operational time? Or maybe this is what it would look like while stationary and out of combat? Has this occurred to you? I don't think so. I'm not reinventing the wheel, I'm not even trying. And my parents were already alive when Verlinden made his models. Think carefully about what you write because you won't always find someone who will respond to your weak taunts in nice words.

@mikapietikainen9234 Жыл бұрын

Thanks for these shorter tips and tricks videos too coldemonspl. I have used this technic before and it gives very good results. Hopefully more good tips coming 👍

@coldemonspl Жыл бұрын

Hope to have more time to make more content but it all depends of my Patreons and my future Patreons! Please join my Patreon if you can :)