JAGDTIGER - painting the beast with Porsche suspension, Blitz by Takom 8003, Jägermeister
Рет қаралды 14,011
Күн бұрынThis kit is Blitz by Takom 8003 upgraded with Atak Model resin Zimmerit, Aber gun barrel, Master Model MG 42 and Eureka XXL towing cables. Today you can check how I dealt with painting the basic color and details on the beast with Porsche suspension!!!
Jägermeister is coming! :)
Jagdtiger was the heaviest armored fighting vehicle (AFV) produced and used during WW2 by any nation. Armed with a 128 mm Pak 44 L/55 could destroy any Allied vehicle. 150 were ordered but only around 80 were produced. It saw service from late 1944 until the end of the war on both the Western and Eastern Front. The enormous weight and underpower caused plague of poor mobility and lots of mechanical problems.
⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️
Support my work and be my Patreon - / coldemonspl
DON'T CLICK THIS! - tiny.pl/9g5bb
Instagram: coldemonspl
coldemons.blogspot.com/
00:00 Intro
00:18 Tarpaulin
04:33 Reset
05:31 Before painting
07:50 Painting
22:02 Markings
25:39 Final touches
@mikeweiss790 Жыл бұрын
Absolutely beautiful!! By far the best modeler on you tube!!! 🔥🔥🔥
@coldemonspl Жыл бұрын
Thx Mike! Please join my Patreon if you can! :)
@panzer-meister Жыл бұрын
Superb. Excellently finished !!! Thank you for sharing. Greetings, NOB from Japan
@coldemonspl Жыл бұрын
Thank you! Cheers! :)
@davidstone-haigh4880 11 ай бұрын
Only recently found your channel and I'm learning so much! Cheers from the UK.
@coldemonspl 11 ай бұрын
Im really happy you are here mate! :)
@fjdexx Жыл бұрын
Great Job. Looks very nice. Big like for you , for humanity and the universe , peace
@coldemonspl Жыл бұрын
Many thanks mate for this! :)
@Deceter Жыл бұрын
Thanks for taping this video for us!
@coldemonspl Жыл бұрын
No problem! :)
@garylawless3608 Жыл бұрын
An outstanding result with painting, stowage, and tarps Lukasz! You do a great job painting the tools and accessories while in place, and this is something I struggle with, because at 70 years old I have trouble with shaky hands. I resort to placing some paper under tools, etc., and this way I get the job done without the need to go back and touch up the base paint job (mostly anyway). It is still a ‘shaky’ job, but I am getting better at it. Your videos have given me some great ideas to improve my modelling, and I thank you for that my friend. Greetings from Australia 🇦🇺!
@coldemonspl Жыл бұрын
Again , massive thx for you Gary for your great comment! I really appreciate it! I always try to do my best to show my work and Im really glad you find it useful in your modelling! cheers! :)
@ScaleOne35 Жыл бұрын
You can use a drop on gloss varnish to prevent pain paint flowing under the tape
@coldemonspl Жыл бұрын
Thx for this tip! :)
@dennismeyers9576 Жыл бұрын
Another great video. I learn something new with each one.
@coldemonspl Жыл бұрын
Glad you enjoyed it :)
@ModeliteDiorama Жыл бұрын
I am already liking all these details :)
@coldemonspl Жыл бұрын
Thank you! :)
@johntreloar8203 Жыл бұрын
Fantastic result, looks really great.
@coldemonspl Жыл бұрын
Many thanks! :)
@deltic5514 Жыл бұрын
Yet another superb video keep them coming
@coldemonspl Жыл бұрын
Thx a lot mate! :)
@octopusm2m64 Жыл бұрын
very beatiful paint job sir !!!
@coldemonspl Жыл бұрын
Many thanks! :)
@garyrunnalls7714 Жыл бұрын
Very cool video. One of my favorite tank kits. Your English is really good and of course I subscribed.
@coldemonspl Жыл бұрын
Thank you Gary! :)
@Chris-ev7xo Жыл бұрын
best respect for this video is the time u made for your kid. Enjoy it before u know it they grow up too fast. Looks like a nice place to fish
@coldemonspl Жыл бұрын
Indeed, there is no problem with fishing. I have a lot of lakes in my area :)
@gruppenfuhrer45 Жыл бұрын
Wow sir incredible job!!!
@coldemonspl Жыл бұрын
Thank you! :)
@Th.M. Жыл бұрын
Stunning!
@coldemonspl Жыл бұрын
Thx a lot mate! :)
@Gundumb_guy Жыл бұрын
This thing looks great man!
@coldemonspl Жыл бұрын
Thx mate! :)
@malcolmmacdougall Жыл бұрын
looks fantastic
@coldemonspl Жыл бұрын
Thx a lot mate! :)
@nigelsmith7366 Жыл бұрын
Lovely work bro
@coldemonspl Жыл бұрын
Thank you so much 😀
@hotelcharlie-six5408 Жыл бұрын
Amazing as ever! Really great build!
@coldemonspl Жыл бұрын
Thank you so much! :)
@bobholmstrom786 Жыл бұрын
Stunning as always buddy.
@coldemonspl Жыл бұрын
Thanks again! :)
@Hori_Ado Жыл бұрын
As always, the stowage and all the extra stuff turned the model into a small diorama. Good job, mate!
@coldemonspl Жыл бұрын
Thank you! Cheers! :)
@laMoort Жыл бұрын
TAPE! :D great stuff so far, looking forward for the following episodes, take care.
@coldemonspl Жыл бұрын
:):):) Thx :)
@Panzermeister36 Жыл бұрын
Excellent video as always! You are a master of making the stowage look convincing and appropriate for the vehicle :)
@coldemonspl Жыл бұрын
Many thx mate! I always try to do my best :)
@nilsburmeister279 Жыл бұрын
Richtig gute Arbeit 👏🏻 Grüße aus Deutschland! looking forward to further videos
@coldemonspl Жыл бұрын
Thx and all good for you! :)
@RimsModels Жыл бұрын
Great video my friend fantastic job on the painting really well explained of each steps really like the tarps and stowage really adds that realism to the build look forward to seeing the netting and weathering stage thanks for sharing 👍🙏
@coldemonspl Жыл бұрын
Glad you enjoyed it :)
@michaelr138 Жыл бұрын
Wspaniała robota 👍😀 Podziwiam.
@coldemonspl Жыл бұрын
Dziękuję! :)
@SPSteve Жыл бұрын
The Jagdtiger is looking great, I enjoyed the video.
@coldemonspl Жыл бұрын
Thx mate! :)
@OzzysScaleModelerSecret Жыл бұрын
Nice video my friend :) All nicely explained . Keep on the good work . Cheers and greetings Ozzy
@coldemonspl Жыл бұрын
Thank you! Cheers! :)
@bastelbude4100 Жыл бұрын
🤩mega. Really cool. Mega model and all the details on the tank. And that you always paint it completely with tank chain. Insane One question. Do the Ak colours dry matt??? With kind regards Olli Have a good day 🤘🏻
@coldemonspl Жыл бұрын
Yes, they do! :) thank you for your comment! :)
@noelmorris5807 Жыл бұрын
looking good
@coldemonspl Жыл бұрын
Thanks 👍 :)
@johndillon8051 Жыл бұрын
Very good techniques to bring life and interest to a single color vehicle. I'm working on an early Stug G that I am considering doing in dar,k yellow only and your work will aid me quite a bit. Looking forward to your next video.
@coldemonspl Жыл бұрын
Best of luck! :)
@wadejustanamerican1201 Жыл бұрын
Very nice build sir. Just subscribed.
@coldemonspl Жыл бұрын
Thank you very much! You can also check my Patreon to see more on this project and on other ones! :)
@danakrause5031 Жыл бұрын
Great Video. The tarps and stowage look great. Nice to see you brush paint so many of the details on the model. Love the pattern on the blanket and the jack came out great.
@coldemonspl Жыл бұрын
Thx a lot mate! :)
@luikausvuoon1939 Жыл бұрын
Now the crew cant get in or out - only driver and machine gunner hatches are free.
@coldemonspl Жыл бұрын
@@luikausvuoon1939 The vehicle is in "stand by" status so the crew is out and they drink beer. So if needed they would make the hatches uncovered. :)
@luikausvuoon1939 Жыл бұрын
@@coldemonspl Well that's fine then :)
@coldemonspl Жыл бұрын
@@luikausvuoon1939 thx :)
@xjr13john Жыл бұрын
Awesome build and well explained, i look forward to its finish. Although I think you have made a mistake with the stowage on the rear deck as there is no access for the crew!
@coldemonspl Жыл бұрын
Thanks! And its not a mistake. I decided to make the model in stand-by position. No crew, no action at all. Just standing and waiting for orders. But on the other hand you have right. It shouldn't be there but for the model appearance I decided to make it as it is. Hope Ive explained my point a bit? :)
@user-pe7gc9jg9d Жыл бұрын
Super!!!!!
@coldemonspl Жыл бұрын
Many thanks!! :)
@ScaleMilitaryModels Жыл бұрын
Looks great! I like the stowage, but I do question the tarp on the roof… wouldn’t this decrease visibility on an already low visibility tank? It would be really difficult for the commander to see anything, and the engine deck boxes prevent any chance of escape.m Just wondering, not saying you can’t have it there. Nice work!
@Pikilloification Жыл бұрын
Not a big fan of it either, but I guess the tank could be getting ready for transport or a cold night...
@nadrazakcz7858 Жыл бұрын
Got the same thinking...as Pikilloification said, covering for the transport would be fine...but this definitely isn't a combat setup, commander would be completely blind. Anyway, Lukasz - another very nice and inspiring video, looking forward for weathering... ✌
@coldemonspl Жыл бұрын
Guys, not all models may represent battle-ready vehicles. Here is the stand-by configuration, i.e. without crew, standing and waiting for orders. The tarpaulin on the roof was folded very often in such situations. So there is no crew inside to suffer from lack of visibility. I hope that explains why there's a tarp. :)
@paulmanuse2353 Жыл бұрын
Looking good!! I don't know about the camo net? I've got the same kit with Atak zimm on it, maybe I'll finish it, looking at yours!
@coldemonspl Жыл бұрын
Next episode will be about the camo net. Stay tuned! :)
@parabot2 Жыл бұрын
Steller work
@coldemonspl Жыл бұрын
:):):)
@jeangariepy3452 Жыл бұрын
Great work Do you have info about your magnet model holder...super tool. Keep the superb work
@coldemonspl Жыл бұрын
Thx! Magnet holder is from RP Toolz. You need to check their website. :)
@jeangariepy3452 Жыл бұрын
@@coldemonspl thanks...your the best
@coldemonspl Жыл бұрын
@@jeangariepy3452 many thx! please check my Patreon! :)
@nebelwerferdiorama8369 Жыл бұрын
You always cover the air intake with camouflage net or tarpulin: what do you think can happen to the tank engine in that condition?
@coldemonspl Жыл бұрын
I think you've mistaken me for someone else. I very rarely cover the fans in any way because I know that it would have a bad effect on the operation of the engine. :)
@TheWysol666 Жыл бұрын
Świetnie te plandeki ogarnąłeś. Mega efekt. Jak oceniasz drybrush od army painter?
@coldemonspl Жыл бұрын
Dzięki! A pędzle... Musze jeszzcze niumi popracować żeby móc ocenić.
@njmayhew Жыл бұрын
Great video! How does the green stuff tarp actually stick to the model? (only 4mins in so apologies if you cover this later!)
@coldemonspl Жыл бұрын
Thx mate! The tarp stuck to the surface by itself and additionally the folds of the material also held it in place. But to be sure, I glued them at the end with a few kings of super glue. :)
@jamiehawkey1066 Жыл бұрын
Beautiful work how long does a model like that take you to complete
@coldemonspl Жыл бұрын
Depends but this one should be finished in 3 weeks. :)
@milannes1574 Жыл бұрын
Hi, I dont understand placement of tarp. In this location there will be big problem for crue to see outside and go in - out of tank and they will be unable to shoot - location of scope ...
@coldemonspl Жыл бұрын
Well, in this configuration the model shows a vehilce in stand by status. Not in the battle or service. Just staying, without the crew and waiting for orders. Now its appearance is clear I hope? :)
@milannes1574 Жыл бұрын
@@coldemonsplOk I understand, but i have never seen this, only with masking nets whitch were perforated and maintained quick entry. Even on tanks on railway transport.
@coldemonspl Жыл бұрын
@@milannes1574 its just a kit and it needs to look interesting and provoke to discussikn. I think it does the job ;)
coldemonspl
Рет қаралды 14 М.
coldemonspl
Рет қаралды 18 М.
coldemonspl
Рет қаралды 23 М.
moshiyan`s hobby scale model research
Рет қаралды 66 М.