[Jaguar E-Type V12] [Engine Rebuild] Part 2 rebuild a Jagaur E type V12 Engine
Рет қаралды 5,333
Жыл бұрынPart 1: • [Jaguar E-Type V12] [M...
Part 3: • [Jaguar E-Type V12] Pa...
@r-a-t-m5805 Жыл бұрын
Nice Job! I was holding my breath as you were fitting that infamous crank seal😅
@jaguarrroman Жыл бұрын
As far as I see, shims are used to adjust the valve clearance of this engine, no hydraulic tappets.
@magnoliav12 7 ай бұрын
Wonder if that's some sort of glue they're placing on that rope seal. I was under the impression that those were supposed to be soaked in oil for a day or so before installation. They seem to be doing it a different way.
@Schlipperschlopper 5 ай бұрын
You cant use any V12 Jaguar because these engines are made fom material made in India and drop valve seats any 20.000 KM!!!!
@Schlipperschlopper 5 ай бұрын
You cant use any V12 Jaguar because these engines are made fom material made in India and drop valve seats any 20.000 KM!!
@Schlipperschlopper 6 ай бұрын
These engines did never work they dropped valve seats any 20.000 miles they are crap!
Red Fish Mechanic 汽車維修師
Рет қаралды 7 М.
Red Fish Mechanic 汽車維修師
Рет қаралды 2,8 М.
Doug DeMuro Русская Версия в переводе от EXO
Рет қаралды 210 М.
CBR Classic Restorations
Рет қаралды 10 М.
🟠Evolution🚗
Рет қаралды 1,2 МЛН
Европа Плюс
Рет қаралды 641 М.
SENIOR WELDER
Рет қаралды 2,4 МЛН
Roud Offthegun
Рет қаралды 1,5 МЛН
Ivan Ivanov
Рет қаралды 6 МЛН