JAGUAR X-TYPE Front Bumper (Removal & Fit)

Рет қаралды 33,584

4 жыл бұрын

jaguar x-type front bumper
In this video I show you how I removed and refit the Front Bumper fitted to a Jaguar X-Type MK1 (01-09) which is similar throughout the models
Please Like this video:👍 • JAGUAR X-TYPE Front Bu...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • JAGUAR X-TYPE Front Bu...
Follow me on Twitter:👍 / hatboyharvey
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / Hallow_s_Beach/ youtube_audiolibrary

Пікірлер: 59

@Le_Petit_Lapin 7 ай бұрын

That hidden bolt behind the wheel liner is an absolute bastard the first time you try and get it out. Once you've done it once however its no problem!

@HatBoyHarvey 7 ай бұрын

Absolutely, until you take it out you can't really gauge if your doing it right and if it has corroded your in more trouble :-)

@sheikhlatif2308 3 жыл бұрын

Thourough process exactly what I was looking for. Thx

@HatBoyHarvey 3 жыл бұрын

You're very welcome :-)

@hotmasked1 Жыл бұрын

Thank you so much I really appreciate it here in Chicago

@HatBoyHarvey Жыл бұрын

Thanks, glad you enjoyed it :-)

@sheff9286 4 жыл бұрын

Nice and clear; thanks!

@gardreropa 4 жыл бұрын

During the last week- Wednesday to Sunday, I repaired the front headlight adjusters, replaced the left front wing, replaced the chrome trims of the bumper cover and put it all back in place... I would only have one thing I learned: when putting back the bumper cover, I found it useful to loosen - just a bit - the plastic pieces ("tags and slots") that are attached to the front side wings to ease the bumper cover back in place, and tighten the plastic parts back in place with a spanner once the bumper cover is back on. Otherwise, I wanted to say that of all x-type front bumper KZfaq tutorials, yours is absolutely the most useful, the most explanatory, and shortly - the best! Thank you so much sir for making it possible! Cheers from Slovenia!

@HatBoyHarvey 4 жыл бұрын

Thank you v much for letting me know how you got on with repairing your X-type. you are very kind to say my video was useful, but it is the only way I know to make a video. I like to show the details that are needed when doing a job. More videos to come. Great car :-)

@BadBoxer 2 жыл бұрын

Thank You verry much !

@michaelhambley5618 3 жыл бұрын

Excellent nice cleat instructions and the music was nice and quiet Lol

@HatBoyHarvey 3 жыл бұрын

Thanks 👍 glad you liked it. I don't put background music on at all now :-)

@spitfirexxi2499 4 жыл бұрын

Well done. Nice & clear, and just what I was looking for. Thanks!

@HatBoyHarvey 4 жыл бұрын

You're very welcome, glad to have helped :-)

@jasondonavich2758 Жыл бұрын

My front strip under the number plate is broken so this will come in handy when I remove the bumper to take.off the broken part and fit some nice mesh in its place.

@MiricLooD 3 жыл бұрын

👍

@steveffff563 4 жыл бұрын

This is a job I have do at the weekend, great video ,hope its as easy as you make it look ,ps how long did it take you?

@HatBoyHarvey 4 жыл бұрын

Thanks. Took me longer as I was filming it, but it is a fairly easy job if you're at all handy. I would give it 20 mins off 15 on (tip - don't rush it) :-)

@redsawww Жыл бұрын

I just bought one of these and have problems with one lowbeam. Thank you very much, nice and cool Hope mine works that easy. From Sweden with the salty roads

@HatBoyHarvey Жыл бұрын

Have a look at the fuses first under the bonnet. The lamp holders fail on these also. (F94 fuse inside glovebox also) fit new lamps :-)

@redsawww Жыл бұрын

@@HatBoyHarvey I gonna do that when Im open my eyes, thank you for that tips!! Must get one of those Haynes, or is there any more detailed books

@markjagodzinski1850 Жыл бұрын

Thank you! Now I’m off to dremel out my fog light slots so that I can fit LEDs in there… Wish me luck!

@HatBoyHarvey Жыл бұрын

You're welcome, hope the fog light idea works well :-)

@markjagodzinski1850 Жыл бұрын

@@HatBoyHarvey It took me all of 3 hours and looks amazing! Do be careful not to burn your fingers, though…

@joegatrill6634 7 ай бұрын

Does anyone know what sort of bolt i need to replace the 4 bolts above the headlights? 2 of mine are missing, the headlight is hanging down slightly.

@hemi255 3 жыл бұрын

What do I do if I stripped the T30 screws?

@HatBoyHarvey 3 жыл бұрын

You will need to get them out and replace the clips and bolts which may prove difficult if they are locked in or spinning around. If they spin the clip may have damaged the surounding material so is to be avoided. Soaking with penatrating fluid helps. If you can't get to hold the clip on the back, drilling or grinding out the head will probably be the best option.

@pab1972 3 жыл бұрын

Hey mate, is it difficult to remove the headlights from there? I need to clean them up, so I have to get them out completely.

@HatBoyHarvey 3 жыл бұрын

Don't know, I'll have a look and maybe do a video on it, thanks :-)

@FS-wl6uo 3 жыл бұрын

Very good video. Would that be similar for a XJ x350?

@HatBoyHarvey 3 жыл бұрын

Thanks, There are all relatively similar, but all different :-)

@FS-wl6uo 3 жыл бұрын

Yes I guess i’ll have to investigate it over the weekend. One of the jet washers got inside the bumper and I am not being able to pull up without removing the bumper. I also have two parking sensors not working. Just bought a ser of driver 🔧 for the job! Thanks for the video, very straight forward.

@xnetcascais 4 жыл бұрын

hi there, great video but by any chance do you have any video where you remove the front fender? greetings, Antonio

@HatBoyHarvey 4 жыл бұрын

Not sure which part you mean?

@xnetcascais 4 жыл бұрын

@@HatBoyHarvey the fender or in mud cover of the front wheel.

@xnetcascais 4 жыл бұрын

image-cdn.beforward.jp/autoparts/original/202004/34681571/3759211_1.jpg

@HatBoyHarvey 4 жыл бұрын

@@xnetcascais ah yes I understand now sorry I haven't done a video on this, but I will look into it. It maybe fairly easy to do with just a few bolts after taking the plastic liner out. Thank you :-)

@xnetcascais 4 жыл бұрын

@@HatBoyHarvey it can be easy but because there are no videos in yt and sometimes jag engineers like to invent stuff, for example in xjs its a nightmare :)

@John_Wood_ 3 жыл бұрын

The bolt above middle of the headlights has just snapped on mine. Don't know how i'll get it sorted!

@HatBoyHarvey 3 жыл бұрын

If you have still got some of the bolt shaft left and can get purchase on it try soaking it overnight with penetrating fluid and use mole-grips or failing that use a bolt extractor or drill it out and then re-tap to clean the thread out (not an easy task, but at least it is easy to get at :-)

@John_Wood_ 3 жыл бұрын

@@HatBoyHarvey Thanks, will try mole grips from engine side. Do you know what type of bolt/screw that is so I can buy replacements?

@HatBoyHarvey 3 жыл бұрын

M6x20 :-)

@John_Wood_ 3 жыл бұрын

@@HatBoyHarvey Thanks!

@ThomSteel 4 ай бұрын

I don't understand why some say that this isn't an easy work to remove that bumper. Can't see anything difficult or time-consuming in this video. What could be the reason?

@HatBoyHarvey 4 ай бұрын

Getting to that bolt under the wheel arch can be tricky, especially if it is rusty :-)

@ThomSteel 4 ай бұрын

@@HatBoyHarvey Ah okay, thanks for the response. But otherwise how much time would you consider for a shop to replace a headlight? From the video it looks like less than an hour.

@HatBoyHarvey 4 ай бұрын

Thanks for reminding me, I have just done that, but not yet compiled the video, should out soon. Easier job with bumper off, but can be done without. It is tight on drivers side and near impossible with big hands on the other without removing the battery + holder. Took me 2 hours, but that included filming and polishing the headlight covers :-)

@ThomSteel 4 ай бұрын

@Harvey You can take off the headlights (I don't mean replacing the bulbs) without removing the bumper? I thought the bumper was over the headlights, so they won't come out without removing the bumper. At least I won't have to remove the covers of the headlight washer jets because they have already fallen off and never been replaced ;-)

@ThomSteel 4 ай бұрын

Could you tell me, if I broke some "bolts" or brackets of the plastic cover, how can you replace these? Is this difficult to get at?