my rear camera and parking sensor has a fault so I used the carsoft lr2 for diagnosis
Пікірлер: 14
@davejarvis5279 Жыл бұрын
I had exactly the same problem,fault showing right rear inner sensor,I changed the sensor and the parking assist module but still had the same problem.it turned out to be the boot lead harness part number C2Z19978 they break down overtime with opening and closing the boot,it destroys the coaxial cable for the camera but shows up as a sensor and parking assist module fault Hope this helps
@wardysworx Жыл бұрын
Luckily mine turned out to be the sensor
@sleepycatpictures1176 Жыл бұрын
That Lr2 is handy to have. I find the towbar works fine as a parking sensor . . .
@wardysworx Жыл бұрын
Really good for the newer stuff. Hawkeye pips it for the d2
@sleepycatpictures1176 Жыл бұрын
@@wardysworx Saving up for a Nanocom.
@wardysworx Жыл бұрын
I've been looking around. I need one that's unlocked
@stephrusty3055 Жыл бұрын
Boot harness cable ,replaced mine cured problem .all worked again Wires break over time, opening and closing boot
@yavuzkaynar64410 ай бұрын
Hello, thanks for the video, I have parking transmitter problems when I turn on the car, the signal is short and then wide away. What were your suggestions for this problem? Thank you
@remonahmed26998 ай бұрын
Hi so mine is doing the exact same thing. Now I've plugged the snap on and it's thrown back all the parking sensors. I changed the park assist module and still the same. Bit on a dead end at the moment 😅
@steveb8269 Жыл бұрын
Thx for the upload pal, mine doing exactly the same...video helped with diagnosis
@wardysworx Жыл бұрын
Just replaced 1 sensor and all sorted
@bullfrogjnr46284 ай бұрын
already done new cable on mine... still not working.... will be module ... as it just bleeps on mine....
@mikeosullivan8249 Жыл бұрын
Did you ever replace that? I've the same issue with the same sensor and bought a replacement but can't find many walkthroughs on how to get in at them!
@wardysworx Жыл бұрын
Yes I replaced it you can get your hand up the rear of the bumper if you take the black plastic tray off. Just twist it and it come out. Unplug. Plug in new one, push and twist.