Tesla (style) Screen in a Jeep Wrangler!

Рет қаралды 60,773

Күн бұрын

I've never done a build before but Samsung sent me their new Galaxy Tab S7+ and I couldn't help but think what that beautiful screen would look like as the center console of a car. If all goes well, we should have the ultimate road trip device...for my needs!
instagram: instagr.am/jakerawr
twitter: / jakerawr
twitch: / jakeroper
If for some reason you want to do this build as well and improve on it, which won't be hard to do, here are my 3D print files and supplies I used:
Samsung Galaxy Tab S7+: www.samsung.com/us/tablets/ta...
Printable Back Left Bracket: www.tinkercad.com/things/2k3f...
Printable Back Right Bracket: www.tinkercad.com/things/c8Cz...
Main Mounting Bracket: www.proclipusa.com/product/pr...
Circular Magnets: www.kjmagnetics.com/proddetai...
Square Magnets: www.kjmagnetics.com/proddetai...
A few additional tidbits about this build:
Samsung makes a 5G model of the Tab but I already have a mobile hotspot so I am using that to get data to the Tab while on the road/in areas without WiFi. ALSO, I discovered a USB port in the storage armrest of the Jeep so I just put the hotspot in there plugged into the USB which is really nice and out of the way!
One reason I really wanted a magnetic mount instead of something more "fixed" is so I can quickly move the Tab to see the car's built-in backup camera when reversing.
My original concept was to have the Tab covering the entirety of the existing screen in the car, but that would have put the Tab's cameras too low which would have killed my dashcam dreams. Bonus: the Tab takes microSD cards so I threw a 1TB card in there and can record soooo much dash footage.
Second bonus: the existing screen in the car can be turned off (Bluetooth still functions) so it isn't distracting when the Tab is mounted over it.
00:00 - Intro
00:47 - Why?
01:11 - The Plan
02:13 - The Build (1st Try)
02:50 - The Build (2nd Try)
03:39 - The Build (3rd Time is the Charm?)
05:05 - The Moment of Truth
#tesla #jeep #SamsungPartner

Пікірлер: 157

@jakerawr 3 жыл бұрын

Check back next week when I make an entire mech suit out of Samsung products*! *This is a lie. My mech suit will be made out of the bones of my enemies.

@shinjonanimations1772 3 жыл бұрын

Hello Jack love ya

@cebollajsjsjsk 3 жыл бұрын

So... Apple products?

@Spiros219 3 жыл бұрын

Love this vid

@Spiros219 3 жыл бұрын

Love this more that could you survive the movies

@nealtandon2276 3 жыл бұрын

Wait...you have enemies?

@jerner17 3 жыл бұрын

You make me feel okay about being advertised to

@TheIronManOfSteel 3 жыл бұрын

Him and Ryan Reynolds.

@MakeSomething 3 жыл бұрын

Jake Roper, I like it when you make things! This is great! Call me.

@TritaniumYT 3 жыл бұрын

You guys could Make Something out of this world

@SamFriedman 3 жыл бұрын

4:35 "I have never done anything in my life," says the Emmy award winner with 4 million KZfaq subscribers.

@PsiVolt 3 жыл бұрын

"Created by Lack of Knowledge" that killed me

@Nazenko 3 жыл бұрын

4:34 "I know this isn't very impressive, but I have never done anything in my life so this is very exciting" ah too relatable

@noisypl 3 жыл бұрын

auto start of google maps after detecting a Bluetooth is really clever!

@ElectronIsABadTuber 3 жыл бұрын

"Well, I can only afford about..... 1% of this car" "Ok" "What?" *rips panel out* "Here ya go"

@echodragon6 3 жыл бұрын

This guy is a genius. A true chaotic neutral genius.

@9usuck0 3 жыл бұрын

Sir, welcome to the land of discovery. Hindsight is 20/20. Everyone does it the hard way and then figures out they did it the hard way when they finish. So many times in my career have I had to repair something and after I finished I realized "... why didn't I do it that way....!?" It's the way of life.

@ijustfelldown 3 жыл бұрын

I got really confused because you didn't start with "Vsause!" only to realise this is your personal channel lol.

@conorcheadle3380 3 жыл бұрын

Gotta be honest, I skipped this video the first time I saw it, then watched Jakes “why creators do brand deals” video then immediately came back to watch this.... And I was a fool for not watching this the first time, Jake can make a great, entertaining video out of anything!

@anarchyantz1564 3 жыл бұрын

Jake: Look at that it holds! Linus from LTT: Look at that it H......... *crash smash*

@ryanlauramore7436 3 жыл бұрын

This is the earliest I've been.

@daisy_301 3 жыл бұрын

Great job Jake!

@MuzikMan2014 3 жыл бұрын

That was freaking awesome Jake!!

@cloidless 3 жыл бұрын

That is pretty darn awesome!

@ChristopherNewman63 3 жыл бұрын

An addition i would make is little 3d printed arms that hold the tablet up from the bottom of the tablet and attached to the mount. Peace of mind that it won't slide off the magnets with a particularly strong bump in the road!

@federicon.5085 3 жыл бұрын

It's good to see you Jake! You're pretty darn awesome too!

@esersazli8078 3 жыл бұрын

Good to see you jake

@CaCtus362 3 жыл бұрын

I love how excited you are about this! And it turned out rly cool!!

@aspenrookcole7520 3 жыл бұрын

This is so cool! I love this creativity and problem solving

@mmm2096 3 жыл бұрын

Pretty cool Jake!

@Brad_Smith_Media 2 жыл бұрын

This is awesome!

@RSpudieD 3 жыл бұрын

Well that turned out nice! Great job, Maker-Jake!

@BigJim2 3 жыл бұрын

Kick butt job Jake! Keep up the great content!

@magmus_32 3 жыл бұрын

"Daddy Smagsung" -Jake Robert

@bluewinkle123 3 жыл бұрын

Awesome idea! I want one!!

@ibtehajshaikh 3 жыл бұрын

Love this new style of vid, Jake, also love the editing in here, very cool shots!

@RobertCobiellas 2 жыл бұрын

You've motivated me.... I'm on it. Thanks!

@matts8511 3 жыл бұрын

This is such a cool idea! I want to do it now!

@RarelyReplies 3 жыл бұрын

Little worried about potholes my friend. By the way, it's great to see you. You look great.

@sergejkeser7270 3 жыл бұрын

Dead AFK arena and RAID-Shadow legends, this is how to make someone watch a 7:27 minute long Ad

@benmckee2548 3 жыл бұрын

DIY Jake! I like it😎👍

@schlenbea 3 жыл бұрын

This is the first example I've seen anywhere of anyone using Bixby. Ever.

@crachor 3 жыл бұрын

I've had samsung phones for a few generations now, and bixby routines is about the only bixby thing I actually use. It's super useful.

@mitchells.madness 3 жыл бұрын

Hell yeah rtj4!!! Short story about them, you put me on to them. From one of the JAM playlists you had the run the jewels instrumental. I was in my local record shop and was in the mood to buy an electronic record I saw the rtj1 album on display. I bought it without listening to it in the store and didn't know they were a rap duo. Thankfully, I love them and now have all 5 records in my collection. Also cool build and good sponsorship

@thebanane78 3 жыл бұрын

you're breathtaking !

@thetokensaregood1965 3 жыл бұрын

You are a real Cool guy Jake!

@miroslavdenic4561 3 жыл бұрын

Until this point ia had no idea this channel existed! I'm so excited!!!

@stephenworsley 3 жыл бұрын

I don't think I've ever been so confused when I saw him take a dremel like that to a 3d printed block hahah

@dan819999 3 жыл бұрын

Nice job Jake Rober ;)

@LifeOfLeeofficial 3 жыл бұрын

Awesome!

@BigGr33nMachin3 3 жыл бұрын

you're so cool Jake!!

@reversethepolarityoftheneu773 3 жыл бұрын

Cool as hoth

@oafkad 3 жыл бұрын

"As you know." *nods slowly* "Sure yeah, definitely knew that."

@TaintedCamper 3 жыл бұрын

4.16 Jake learns what tolerance is the hard way I think most ppl that 3d print do this on there 1st time round or so or was that just me 2 cool project bro

@Iwijn2000 3 жыл бұрын

Jake Roper, the kind of guy to 3d print a cube and then hand carve a statue out of it.

@norkimo8797 3 жыл бұрын

I like to watch videos were people do stuff like this and i like those videos even more when you make them.

@ElliotDooleysmith 3 жыл бұрын

This reminds me of my first car, back in 2012. My little Smart car and "the new iPad", aka the 3rd generation iPad. I had a desk stand that sorta looked like the iMac stand, but could spin around so the base stuck out the back, then the Smart car had a little drawer under the radio, which I routed an aux cable up through the back, along with a USB to 30 pin charging cable. Connected the iPad to my phone's hotspot and boom, 9.7" display. This was before iPad could split screen, but could use Google Maps and there was a music app designed for car use, even had swipe actions to control.

@matthewoldrini1220 3 жыл бұрын

He surprises me every time

@XiTER96 3 жыл бұрын

The Twitch stream where you colour graded this video was great! Keep it up Jake!

@TheOzarkWizard 3 жыл бұрын

Also low temp PLA plastic will melt in the summer sunlight, use High temp PLA or ABS

@thewarhammer6606 3 жыл бұрын

I love you, Mr. Rober.

@misaalanshori 3 жыл бұрын

2:14 that digital caliper looks exactly like mine, i bought it for $1.5 😂

@shubhamagrawal2426 3 жыл бұрын

Do the magnets 🧲 hold up during bumpy roads ⁉️ 🛣️

@RexusKing 3 жыл бұрын

Wow I never knew you can use TinkerCAD online! So basically you can just CAD online with any tablet in world, that's cool!

@Skimmo23 3 жыл бұрын

Thank you!

@Djuntas 3 жыл бұрын

Now I wonder if they have a tablet holder thats buyable, but then I think of the good feeling you got from making it yourself :P

@rafaelyaba9018 3 жыл бұрын

I like how he made the coffee in the 3rd try

@kiritopuff634 3 жыл бұрын

Omg I loved it I think I'm gonna do the same to my car. *NEW SUBSCRIBER*

@TheCookieMansion 3 жыл бұрын

After discovering Michael reeves and watching a couple of his videos yesterday, this is sooo cute lol

@iamwhatitorture6072 3 жыл бұрын

It worked! The video was really good and your build worked... well even. See you later

@hornetluca 3 жыл бұрын

I bet that editing this awesome video took you more time than building your project. See you later.

@hotdrippyglass 3 жыл бұрын

Mind the pot holes don't shake your rig loose unexpectedly. Let the passenger catch it if it goes. It won't be that far of a fall for any real damage, I think. Famous last words, those; "I think".

@fiskmactaggert5030 3 жыл бұрын

how on earth do you match Michals type of energy so effortlessly

@zlee2656 5 ай бұрын

nice one

@PyraHydrokorra 3 жыл бұрын

OoO roadtrip HYYPE!

@skoemmy5900 3 жыл бұрын

This is content dude

@kieferrush6818 3 жыл бұрын

You may be new to making physical things, however, Coffee breaks between an eff up and the solution is a pro level strat.

@FidgetSpinoza 3 жыл бұрын

Jake, mah boy, you seem to have cracked to code ;) keep creating content like this! you'll be a wealthy man, and us happy viewers :D

@joshuabetts2092 3 жыл бұрын

Great build! I know it's a touch screen, but would you consider making a keyboard dock so if you needed or wanted to type something a little longer? Just trying to solve the same problem on a 2018 Jeep Wrangler JK for a Surface Pro 3. Thanks Jake.

@steve293 3 жыл бұрын

Is there any audio lag? My ford bt had a huge audio lag.

@thetokensaregood1965 3 жыл бұрын

This was a Cool video. Weird that There are so few comments.

@9usuck0 3 жыл бұрын

Also, the easiest way to inset bolts is to just lightly hit the holes with a bigger drill bit.

@Janna_2825 3 жыл бұрын

Hey Jake 👋🏻👋🏻

@pepitodelrancho 3 жыл бұрын

I have been inspired I will do something now

@jacobnator-hi5ir 3 жыл бұрын

dude!! 🤘😲🤘

@jamesguzmanii9812 3 ай бұрын

Wait wait wait... Driver controls music, passenger shuts their cake hole.

@DamianAI9 3 жыл бұрын

It's like a Game Boy but more functional and many more attachments

@MikeOrkid 3 жыл бұрын

Doug @soundmanca is the guy for the job. 😉

@bswtsp21 3 жыл бұрын

What on earth was dislikeable about this video? You are alone on this, dude.

@shinjonanimations1772 3 жыл бұрын

Hello Jack love ya

@Hitman-px8sl 3 жыл бұрын

When is your next video on vsauce3 coming out

@troy7776 3 жыл бұрын

Do you think this would be possible if you took out the navigation and replaced it entirely with either a Tab S7+ or ipad mini to make it look more slick.

@Reyes13Mario 3 жыл бұрын

Nice. And what you did is not dumb if it helps you a lot.

@keepmoving1185 3 жыл бұрын

Clicked cause you beat Tesla to it!

@akimwilliams7907 2 жыл бұрын

This is nice and also good for uber and lyft drivers with alexa auto that new device 👍👍

@TristanJCumpole 3 жыл бұрын

Well well, Jake. This install is nice. I did more or less the same thing in my Chrysler 300C with a Samsung Galaxy Tab A 10,1 however soon started to hit hiccups thanks to Samsung's spotty implementation of USB C host prioritisation, as I'm running more than just the tablet itself. Essentially the tablet is on the end of a USB C hub (with passthrough charging, Kingston Nucleum) and the hub has a USB C Meizu DAC (unbelievable little thing), a USB 3.0 SSD (type A) and a 12v to USB PD/QC3.0 charger powering the whole thing. Unfortunately, the whole install is problematic since the tablet decides to take over the role of powering this little USB network once the car powers down. When powered up, the tablet isn't that consistent in configuring the devices it "sees" on the hub, often sitting there charging only. No audio, no data. Bums. Do I have to go and become an Android dev to fix the spotty (this is being kind) Samsung ROM? It almost seems like the best option....

@therealPelo 3 жыл бұрын

I watch a lot of Doug Demuro videos about cars and my question ALWAYS is why don't they just put in a Samsung tablet or an iPad in instead of those crappy screens they have? I understand the legal and financial problems with that, but this shows how good of an idea it is! I don't have a car, but if I did, my first upgrade would most likely be doing something like this.

@mrlebanon6055 2 жыл бұрын

bcz it cant withstand the elements