Making a Plug for a Mold - Part 4
Рет қаралды 19,008
Күн бұрынIn Part 4 of our series on how to make a plug for a mold, Stephan is ready to make the first layup of polyester laminating resin and fiberglass over the foam mold he has been constructing, fairing and perfecting.
With a few layers of release wax, Stephan is able to confidently apply gelcoat to the plug and know that it will come off with the fiberglass he has applies, as part of the mold.
This method is useful for building just about any part you need, and can be translated to work with a number of different projects. You can get your gelcoat, fiberglass and laminating resin from TotalBoat at www.jamestowndistributors.com.
@theislandpackrat 8 жыл бұрын
Look's really good!
@9891Daniels 7 жыл бұрын
Could this same process be used for somthing as big as a quarterpannel ? Say if I wanted to design my own widebody on a car.
@onedickhead 8 жыл бұрын
At least tell us what type of bike this is going on....... love your videos.....
@captainsledge7554 5 жыл бұрын
What kind of release did u use for the mold
@ManiMani-uo3qo 3 жыл бұрын
Chamical name explained pls brother
@keithknight2194 6 жыл бұрын
Why use epoxy primer and not a spray can primer?
@JS-rp7qb 6 жыл бұрын
Guessing it’s a solvent issue. Lots of stuff will dissolve that foam... epoxy won’t. Plus it’s bullet proof.
@ManiMani-uo3qo 3 жыл бұрын
Fiber racing next 3 trapped chamical name what?
@ManiMani-uo3qo 3 жыл бұрын
Fiberglass chamical name all mettiral name explai pls
Easy Composites Ltd
Рет қаралды 779 М.