I have a 1988 D100 with the same paint scheme as yours. Hopefully, in the future my truck will look as good as yours. My truck needs this exact repair and your video was exactly what I needed to see to make it happen. Thank you so much for posting this! Liked and subscribed!

Same issue happened to my 77' a month ago. Popped the rod back in place, lasted one pull (due to clip being broken); but internally it looks the same. Thanks for posting, saved me a lot of effort trying to find the correct kit or clip to replace it with. Like anything with these older trucks, purchase multiples while they are available. These parts won't be produced forever.

Love watching the videos man, got a 84’ Dodge myself and it’s good seeing how to fix different things. Keep up the great work.

Thanks for the tips! I have My Grandpa's 82 Dodge Ram D150 \6 custom 4spd manual. And I'm in the process of restoring Her to get back on the road again! Yet again thanks for the tips, keep up the great work!!

i have this exact problem with my 87 and now it’s fixed with the help of your video thanks!! awesome video!

Once again You’ve helped when I didn’t think anybody else good, I’ve been using these stupid plastic rod ends because I wasn’t able to find the correct clips but thanks to you I ordered them and just put them in.

Def keep these videos coming they’ve helped so much since I purchased my 1990 d150! My Hood doesn’t close all the way cause the good latch and the cable release. It would be awesome if you can make a video about how to replace those!

Dude I love the vids my 1990 has been in the family since new and your series has helped breath new life in to my rusty old truck.

Love your videos. I have a 1988 W100. You helped me fix my tail gate. Never opened so easy. I'm having issues with my instrument cluster. I removed the voltage limiter and replaced with an electronic version I built. But my gauges still aren't accurate. Thanks for your help.

Subscribed the channel today. Discovered the channel after watching the yard videos. Moving out of your old house really touched my heart. Love from Nepal 🇳🇵

Quick and easy project. Thanks for sharing!

Thanks for the detailed high quality video! Great looking truck!

Gunna tackle mine this weekend and hopefully fix it. The lower pivot part of mine are broken also.

I have a 87 dodge d100 and these videos help alot with repairs

Great video but I’m having an issue where my rod isn’t connected to one of the outer sides, and I can’t see if it needs to be “hooked” or “clamped” or what to get it reattached.

Thanks for the video Jason. Just scored a 1976 D100 318 4 spd MOPAR!

Thank you. I’m thinking this might work for my 87 dodge Dakota!

Love that truck. Nice little fix!

This was super helpful! I just got my '87 RAM tailgate back together with two new clips as both were pretty much trashed! The hardest part was getting the three bolts out. Ugh.

My 83 dodge d150 handle doesn’t work as well so I appreciate this video.

Thanks for all these great Dodge videos. Very helpful!!

Love your truck man

Thanks for the video! Been dealing with this with my 1985 d150 prospector since I got it. It's really in great condition so it has been bothering me

thats next on my list thanks for the video wiper link bushings and freeing up the wiper mounts as they tend to age would make a great how to video if your truck might need it 👍🏻

Easy to watch, easy to understand, now, let’s see if I can do it. Thanks. J

going to try this on my 1996 Ram. Thanks!

Thanks for the video! I have an ‘87 d150 and of course the clip decides to break shortly before we move... I tried taking the handle out but it won’t come out because the tailgate’s been dented on the back side so it’s hitting the lip of the opening. I was however able to see which side was broken by looking up under the handle and then removing the latch of the side that needs replaced to access the end of the rod. I wasn’t able to find a clip that works so I’ll have to order it. But at least I know how to fix it now and how to unlatch it until it’s fixed!

very informative..thank you!

My 87’ D150 Long Bed had this problem, thank god for this video!

i got a '87 dodge d150 so this helps alot

Hermosa ram muchísimas gracias 👍

Nice!! More dodge video!!

Awesome! I didn’t know it was that easy

Thanks for the video appreciate it 🙏 I have a 95 Dodge Dakota and my tailgate latch wont open because a rope got closed carelessly in by a family member, do you have any ideas on how to get it out so I can use my tailgate properly again? Thank you in advance for your time and help!

Thanks!

Thanks man😊

Very Good ❤

I was was expecting to see lots of rust under that diamond plating. Glad to see that wasn't the case!

Love the vids and the intro music 😉

Could you do a video on changing the belt/ pulleys on your dodge ? I’m having a little trouble with mine and would help a lot! Thanks and good luck

Jason can you do a video on how to fix the sticky door button on these first gen cummins, or if you have any tips or tricks, thanks.

1976 d 100 can’t get the 3 screws loose from inside tailgate..used penatrating oil for a wile ..gotta try fire next..been using needle nose plyers to pull one rod to let😂 tail gate down..now I know where to get the clips..thanks

72-80 FIRST GEN OWNERS / Just to report - the same kit listed will repair broken driver / passenger door rod clips as well. You don't have to remove the handle to fix this if removing the three screws is a no-go (or bed liner, etc.). If you have an early first-gen, 72-80, you can force the latch open all the way to give you the length you'll need with the rod (ex: few layers of cardboard & flat head screwdriver used as a wedge ) and place a non-marring object to wedge the physical tailgate handle completely open (microfiber towel and handle of large screwdriver work well) where your hands will remain free. It's real tight, you'll need a flashlight, small flat head screwdriver (long shaft) for maneuvering the rod in position over the hole, 'super lube' or equivalent rubbed on the end of the rod for lubrication, and another large shaft, flat head screwdriver for applying downward pressure to get it seat into the new clip hole. Pair of cobra pliers or alternatively, needle nose pliers to rotate the clip, and the small flat head screwdriver to assist in locking it over the rod. Don't expect it to take five minutes, but you can get it done in an hour or so.

Lol I fixed the right side installed on my 86 d150 put back on now have to purchase for left side too lol latch only opens halfway

Haha love the intro

It appears my rod has come lose on the hinge side I can feel it dangling. Any advice on how to fix thanks in advance

this video is very informative I now know how to dismantle my broken tailgate handle. I am in France and it is difficult to find this handle, would you have any links to give me to find this handle, thank you. I follow you from France and I really like your videos. it helps me a lot for my 1988 d150 😉👍

hahaha oh man i have the same problem with my '77 ramcharger. thanks for the vid

Can you tell me why 1993 D250 px door won't unlock? and how to fix it.? It is so close to the seat you can't get the door panel off>

Do you know if anyone make a locking latch for 70’s Dodge truck tailgate ?

wow i love you

Hi I have an 87 D250 and I’m missing a tailgate support bar , does anyone know where I can get one , it’s the passenger side

Where did you get that diamond plate tailgate protector??? I can’t find one for a dodge anywhere!

Hey, my strike bolts are missing. Does anybody know if there's a part number for these?

any suggestions for an 89 dodge dakota?

Was watching your videos and was wondering on the video you did on the front suspension and steering did you replace the steering shaft order the hood and if so did you happen to video it? Mine is really loose but all the stuff you replaced is good but the steering rod is really loose on the steering box. Thanks in advance on any info about this issue.

Can you make a video of your roof tent and how you set it up on truck please!

🎉🎉🎉

U lucked out...1989 dakota locked close...i had to drill and cut an access out of the tailgate to unlock latch from inside...the clip broke at the latch... It would have been nice if Dodge had put in a couple access panels... repairs on this year of the Dakota have been a nightmare .

Mine wasn’t, got it open and now it won’t latch at all. Hopefully the same issue. I’ve done this on the doors.

Where did you get the tailgate cap?

Sneaky little Grom hiding in the background.

I just did this to my 1989 dodge the plastic clip cost less than 2 Dollars for the pack. Amazing how a 25 cent clip can break off and the tailgate won’t open

Hamburgers!

I have an 88 and the tailgate won’t open. I have to jump on the bed and unlatch it manually cause I’m short. It’s now a project truck.

So I gave a like how do I thumbs up?

I lost the one clip that fits inside the tailgate now I gotta get another 😭😭😭

I'll be damned I had the exact same clips break

Well, what do here in the UK when we are faced with a conundrum like this is that we reach for a hammer. If that fails, we go get a bigger hammer! 😂😂