Make YOUR AUDIO Sound PROFESSIONAL Using FAIRLIGHT in DaVinci Resolve 18

Make YOUR AUDIO Sound PROFESSIONAL Using FAIRLIGHT in DaVinci Resolve 18 | Part 2 - COMPRESSION

Рет қаралды 40,673

Күн бұрын

📣 🔥 SAVE 70% on AUDIIO Pro Plan: audiio.com/jason 🔥 📣
🚨 Use Code: Jason70 🚨
PART 2! - I’m going to continue to show you how to make your audio sound better and more PROFESSIONAL in this DaVinci Resolve 18 Fairlight tutorial! If you are trying to get your VOCALS or DIALOGUE to stand out in your MIX, then COMPRESSION can help do the job for you. COMPRESSION will also help your audio be more CONSISTENT between the QUIET parts and the LOUD parts. Be sure to follow along with the series!
AUDIIO: geni.us/AUDIIO_Music-SFX
🔥 GET 10% OFF LIFETIME PLANS with Code: Jason10
☕️☕️☕️ Buy Me A Coffee: www.buymeacoffee.com/JY
🎈TRY TUBEBUDDY: www.tubebuddy.com/FocusPhotog...
My Store - Presets and More! jason-yadlovski.myshopify.com
FREE EQ Tips/JOIN EMAIL LIST: www.buymeacoffee.com/JY/e/9853
🚨💰 SAVE $50 on Annual Motion Array Subscription using my link below! 💰🚨
🎥 geni.us/MotionArray_JY 🎥
🎞ArtGrid Stock Footage:: geni.us/Artgrid_Stock-Video 🎞 🔥 Get 2 Months Free!!!🔥
🌤 Backblaze: www.backblaze.com/cloud-backu...
(never loose work!)
MERCH: jays-shop-32.creator-spring.com
Full Disclosure: As an Amazon Associate I earn a small commission from qualifying purchases. There is NO EXTRA COST to you.
DaVinci Resolve Studio: geni.us/DaVinciResolveStudio
Davinci Resolve (FREE!): www.blackmagicdesign.com/prod...
MY GEAR!
🎥 My Camera Gear 🎥 kit.co/JasonYadlovski/photogr...
🎙 🎧 Audio Recording 🎧🎙 kit.co/JasonYadlovski/audio-e...
💡Lighting/Office/Studio💡 kit.co/JasonYadlovski/lightin...
💻 Computer/Office/Studio 💻 kit.co/JasonYadlovski/compute...
FREE EQ Tips/JOIN EMAIL LIST: www.buymeacoffee.com/JY/e/9853
0:00 What is Audio Compression & Why Use It
2:13 Where to Find Compressor
3:14 Compressor Settings Breakdown
3:36 One Click Compressor Presets
4:40 Compressor Knobs & Dials Explained
5:46 Compression Knee
6:27 How to Reset Compressor Settings
7:03 Attack
7:57 Release
8:26 Sidechain Send/Listen
9:08 Using Compressor
10:17 Using MAKEUP to Make Quite Parts Louder
12:27 Attack, Hold, Release
15:04 TRICKS! Attack & Release

Пікірлер: 209

@JasonYadlovski 2 жыл бұрын

📣 In case you missed Part 1 in the series: kzfaq.info/get/bejne/mb6Fmqimz5ythac.html

@curvycrossing108 Жыл бұрын

your videos are by far the best and soooo educational!! without being overwhelming! thank you so much!!!

@JasonYadlovski Жыл бұрын

Thank you for your kind words! I appreciate you checking out my videos! 😁👍 Glad they are helpful.

@2Siders 7 ай бұрын

The first 1:30 min of the video is exactly how you are supposed to explain what compression is, the graphics helped tremendously! Amazing video

@JasonYadlovski 7 ай бұрын

Thanks!

@StephanieJeanne 2 жыл бұрын

Have used part 1 info already, and will definitely use this. Thanks for your explanation! I didn't know what compression was until now! 😊✌️

@JasonYadlovski 2 жыл бұрын

Awesome! 😁👍

@IkambaDeVictoire Жыл бұрын

Wow, I love the way you explain everything in such a fun and engaging way. Your energy is always 👌🏿, and your facials crack me up! Haha I learned so much in part 1 and 2 (and your noise reduction video as well) that will be taking my upcoming vidoes to that next level I've only day dreamed of! So thankful I don't have to read through long manuals and that there are awesome people like you out there with engaging videos to help people become the best media, audio, KZfaq ... WHATEVER producers that they set out to be! Blessings my friend! 🙏🏿🌻

@JasonYadlovski Жыл бұрын

Thanks so much for you kind works and for being a part of the community! I appreciate you!

@MichaelDooney 11 ай бұрын

This might be one of the best videos that I've seen on compression, not just in Davinci, but how to apply compression in general.

@JasonYadlovski 11 ай бұрын

Thanks, I appreciate that!

@KarlRock 9 ай бұрын

Thanks a lot! I usually apply makeup gain at the end and use the threshold to bring everything down to the lower parts. Same outcome I guess?

@JasonYadlovski 9 ай бұрын

Sure, you can do that if you're getting the results you like.

@richardmorschel6266 Жыл бұрын

Thanks Jason! Very helpful and yes, now I will try out compressing audio.

@JasonYadlovski Жыл бұрын

You're welcome! I'd always recommend using some compression. 😜

@ErivesFilms Жыл бұрын

You are a great teacher, it's easy to understand your tutorials! Thank you, keep making more!

@JasonYadlovski Жыл бұрын

Thank you for your kind words! I'll keep them coming!

@raywan22 Жыл бұрын

yessir definitely heard the difference, thanks for your tutorials!

@JasonYadlovski Жыл бұрын

You're welcome!

@vladislavhusnutdinov1523 2 жыл бұрын

Yes could hear the difference. I always like to watch your videos. And also I started consider to buy for $59 for a year. That’s very good deal. Thank you very much. God bless you

@JasonYadlovski 2 жыл бұрын

Great! Thanks so much for watching, God bless you too!

@mrkumaran 2 жыл бұрын

Awesome tutorial as always. Did not know that about the attack and release. Makes sense what I was doing wrong now. Thanks for the video

@JasonYadlovski 2 жыл бұрын

You’re welcome! Thank you for checking out the video!

@muchfunwithtrains 4 ай бұрын

Thanks for another great video. Here you totally answered the question I posted recently in your other video, about which part of the waveform gets compressed. Now I see how it makes sense to compress the voiceover, and then apply the limiter to minimize violations of True Peak. You're a great teacher - keep it up! And yes, I'm about to use it on a video of a hybrid meeting where the audio contains both the loud presenter waveform and the quieter audience questions waveforms. It should work great!

@JasonYadlovski 4 ай бұрын

Thanks for your kind words! Hope this works out well in your video!

@ILM2219 2 жыл бұрын

I had that problem... Thanks for compression insight! Great job!

@JasonYadlovski 2 жыл бұрын

Thanks! Glad it was helpful!

@potionofknowledge Жыл бұрын

Wow thank you sooo much for these!

@JasonYadlovski Жыл бұрын

You’re welcome!

@IvanSidaruk 2 жыл бұрын

Your videos help an amazing amount for professionals and amateurs everywhere, thank you for these videos.

@JasonYadlovski 2 жыл бұрын

You’re welcome! I’m glad they are helpful. Just trying to help as many people as I can. 😁👍 Thank you for watching!

@GaryCunninghamyouareenough 2 жыл бұрын

Part 1 helped a LOT .. as will Part 2 😁 So informative - cheers as always Jason 🙏🏻🤟

@JasonYadlovski 2 жыл бұрын

Thanks Gary! 😁👍

@OlesiaKorobka Жыл бұрын

Thank you so much for your videos!!!! You literally saved me hours of my life. Thank you for your input and doing all that you do!

@JasonYadlovski Жыл бұрын

Happy to help! I'm glad you have found my videos helpful! Thank you for watching!

@lamarthomas1127 8 ай бұрын

This is a GREAT video, It helped a lot!!

@JasonYadlovski 8 ай бұрын

Glad it helped!

@osayandeaikhionbare1636 Жыл бұрын

thanks for another helpful video!!

@JasonYadlovski Жыл бұрын

You're welcome!

@VFXDobleC Жыл бұрын

Great! Pretty good explained compression functions. Thanks.

@JasonYadlovski Жыл бұрын

You’re welcome and thanks!

@criativoscopio Жыл бұрын

I cannont even BEGIN to thank you for all my eternity. I FINALLY understood Compressor. Thank you very much!

@JasonYadlovski Жыл бұрын

Awesome, you're welcome!

@theplussizecostumer 2 жыл бұрын

I tried to use compression a few times before in my videos, but this video has helped me understand it a better what it all entails. Thenks.

@JasonYadlovski 2 жыл бұрын

You’re welcome!

@mrt5069 Жыл бұрын

On my to practice all this! Thx a lot!

@JasonYadlovski Жыл бұрын

You're welcome!

@gobeyondbangkok Жыл бұрын

Best tutorials. Help a lot.Thank you

@JasonYadlovski Жыл бұрын

You’re welcome, thank you for watching!

@Suchinh_Karanth 10 ай бұрын

Wow! This tut was real handy! Thanks a ton! 👍

@JasonYadlovski 10 ай бұрын

You're welcome!

@REMVPS 2 жыл бұрын

Very informative Jason, thank you.

@JasonYadlovski 2 жыл бұрын

You’re welcome Ray! Thanks for watching!

@jasoncullen4085 Жыл бұрын

You just changed my life. Thank you!

@JasonYadlovski Жыл бұрын

You’re welcome!

@Alex_Brezhnev 8 ай бұрын

very good lessons. Thank you very match. One more subscriber !

@JasonYadlovski 8 ай бұрын

Thanks! Welcome to the community!

@appealinglife Жыл бұрын

Thank you!

@JasonYadlovski Жыл бұрын

You’re welcome!

@titanvision.studio413 2 жыл бұрын

You are the best. Thanks mate ;)

@JasonYadlovski 2 жыл бұрын

You’re welcome, thanks for checking out the video!

@leotexas3485 11 ай бұрын

I'm going to have to watch these 2 videos a couple of times before I can grasp it. 😁 But these are great resource videos!

@JasonYadlovski 11 ай бұрын

Awesome, glad they’re helpful! If you have any questions, drop a comment and I’ll help you out. 👍

@supertonyxd Жыл бұрын

thank you!!!

@JasonYadlovski Жыл бұрын

You’re welcome!

@jacob9191 Жыл бұрын

Literally saved my project. Legend.

@JasonYadlovski Жыл бұрын

Nice! Best of luck on the project!

@l0rdcroissant 2 жыл бұрын

one day I will sit down and focus on learning more about sound since it was foreign to me haha, but this goes in the vault for future viewing ;)

@JasonYadlovski 2 жыл бұрын

Little by little man! 😁👍

@HviteVinger 2 жыл бұрын

Love your voice tutorials!

@JasonYadlovski 2 жыл бұрын

Thanks! 😁👍

@3dchick 2 жыл бұрын

I learn so much every time!

@JasonYadlovski 2 жыл бұрын

Awesome that’s great! Thank you for watching!

@shesaidyesweddingfilmphoto5609 Жыл бұрын

I'm jumping from Premiere and learning all the knobs and sliders to mimic my old workflow. Very well explained. I tried to use the Multiband in Resolve, but that is not the same apples as in Premiere.

@JasonYadlovski Жыл бұрын

Welcome to resolve! The tools may be a little bit different in result, but I’m sure you’ll be off and running with a good workflow in no time. Thanks so much for watching!

@wildedricmedia4504 Жыл бұрын

Really good yet simple explainer video....great work and thanks from a UK production company 🙂

@JasonYadlovski Жыл бұрын

You’re welcome! Thank you for watching! 😁👍

@thilinaalagiyawanna3680 Жыл бұрын

Thank you very much

@JasonYadlovski Жыл бұрын

You're welcome!

@orainethomas Жыл бұрын

Very informative 👍

@JasonYadlovski Жыл бұрын

Thanks for watching!

@richardcliff3510 2 жыл бұрын

Hi Jason. This is very helpful. I learned a number of subtle improvements that I can apply to my videos. I have a question relating to wind noise reduction for my GoPro. Wind noise is often an issue on my backpacking videos. There are tons of videos that tell you to apply a low pass filter which helps to some extent but are there other techniques perhaps using the equalizer or expander tools to further remove the wind noise? Thanks for any suggestions. A video devoted to this challenge would be awesome!

@JasonYadlovski 2 жыл бұрын

Hi! Thanks for checking out the video! Wind noises are a tough one, most of the time you can’t get rid of all of it. A low Pass filter can help, you could also try using a high pass filter to get rid of some of the rumble. The EQ can help as well, I would pick a point then boost it up and try and find the offending frequencies, then drop it out a little bit. There’s also third-party noise reduction plug-ins that might work good, I’m actually gonna be testing some out soon. Stay tuned because if I find a good one I’m gonna put a video out about it. 😜👍😁

@thomasgarcia871 10 ай бұрын

Buena día, una duda para audio, como es la mejor manera de administrar el audio? Tengo 3 diálogos, debo aplicarles reverb, así que creo un auxiliar de reverb. Entonces, tomo los tres diálogos y los envío a ese auxiliar. Ahora, esa información se envia a un grupo que se encarga de recibir las tres señales de diálogo, mi duda es la siguiente. Los 3 diálogos que ya he enviado al auxiliar, debo enviarlos a su ves al máster? Y la salida auxiliar dónde está la reverb también debo enviarlo al máster? Cómo sería el flujo de señal para administrar correctamente esos tracks? Gracias.

@BlackcountryhistoryhunterBCHH Жыл бұрын

my god !!! your good ... Einstein said to understand something you must be able to explain it simply .. and sir you do that!!!

@JasonYadlovski Жыл бұрын

Thanks!

@AndrewVanBeekOttawa 5 ай бұрын

It’s a shame that using the compression function doesn’t reflect back in the waveform. It seems that the visual feedback would make it easier to change the settings the correct the volume variation. I have used compression in Audacity and it does exactly this. Is there a way to show it in the waveform?

@stephantual 8 ай бұрын

I'm doing talking head shows with an overhead shotgun, and this helped me get much better results beyond the presets! Thanks! One (terrible) tip - 10db on average is the standard of course, but youtubers are cheeky and 99% of the content out there has been boosted to the limit. So a 'well balanced' video will sound soft if someone clicks between videos... something to keep in mind. Also, simulating spatial audio works well, and if you're lazy, just export the whole timeline as a bin and reuse the same settings (assuming you didn't move your mike) between your vlogs.

@JasonYadlovski 8 ай бұрын

Glad the video was helpful! I yeah ya on the -10db, but that's why you finalized and master for the loudness for the given platform. That will bring up everything so it's not too quiet. 😜

@stephantual 7 ай бұрын

Thanks for the reply@@JasonYadlovski !!

@mutanttransmissions Жыл бұрын

thank you

@JasonYadlovski Жыл бұрын

You’re welcome!

@UncleStewTheOldManOnTheBlockTM Жыл бұрын

I want to thank you very much. This is great information. I am learning to edit better and make my sound so much better. I even used both your setting on my editing software as well as my Rode caster too. this make post production great. Thank you

@JasonYadlovski Жыл бұрын

Awesome, you’re welcome! I’ve got lots of videos to help you with audio, thanks for watching and feel free to ask questions if you have any. 😁👍

@UncleStewTheOldManOnTheBlockTM Жыл бұрын

@@JasonYadlovski I will. I been on KZfaq for one year now, I'm at 2k, yet this year I'm trying to do more videos, and I'm changing my topic to target a different audience. I'm a male centered platform yet I'm trying to move towards books and self help platform and Being a better editor . You are helping me a great deal. Thank you.

@JasonYadlovski Жыл бұрын

Nice, keep working at it and learning and you’ll grow. 😁👍

@UncleStewTheOldManOnTheBlockTM Жыл бұрын

@@JasonYadlovski thank you by the way I'm from NYC. Lol.

@JasonYadlovski Жыл бұрын

Awesome, right cross the river from me. 😁👍

@d42 2 жыл бұрын

Hey have you made a video about how to get Davinci exactly how you've set it up on one PC to another? So I don't have to change all the settings and redo power bin ...

@JasonYadlovski 2 жыл бұрын

I think if you export the database, that will come with it....but I'm not 100% sure. When I've moved from my Mac to a PC and back, I've just used a backup of the database to get all of my projects. But that was before I had a big library in the power bins. I'd have to try it now and see if it works....

@DaveKnowlesFilmmaker 2 жыл бұрын

Great video Jason. Probably the best I have seen on compression. Looking forward to the rest of the series. Are you eventually going to deal with LUFs for things like KZfaq in this simply explained way as much that is available is far too complicated and brushes over how to adjust it visually.

@JasonYadlovski 2 жыл бұрын

Hey Dave - thanks! I can cover loudness. I do have a video on it already, not sure if you’ve seen it but here’s a link: kzfaq.info/get/bejne/id-Hea-Emby7pnU.html

@DaveKnowlesFilmmaker 2 жыл бұрын

@@JasonYadlovski Hi Jason, I have watched that and will watch it again but I just love the simple way you explained things in this video. It is the first time I have seen a compressor explained that is so easy to understand.

@JasonYadlovski 2 жыл бұрын

Got ya, totally makes sense. I’ll put some thought into remaking A video like that but make it easier to understand. In general I always try to simplify things because I know a lot of things in DaVinci Resolve can sound very complicated. Thanks for your feedback, I appreciate it! 😁👍

@DaveKnowlesFilmmaker 2 жыл бұрын

@@JasonYadlovski Look forward to the video. Thanks for listening.

@3dchick 2 жыл бұрын

If anyone's on the fence about Audiio, it's fantastic! Lifetime membership here. 😁

@JasonYadlovski 2 жыл бұрын

😁👍

@ozzmanzz 2 жыл бұрын

Thanks Jason, great stuff as always. Can I put in a request for a video on the best way to setup and use 3rd party controllers such as the Icon Platform M+ or the Behringer X Touch compact with Fairlight? These are much cheaper options than the BM Desktop Console and there is very little info available on using them in Fairlight.

@JasonYadlovski 2 жыл бұрын

You're welcome! I can look into those units and see if that's something I can test out and if it would work with Resolve. Thanks for checking out the video!

@ozzmanzz 2 жыл бұрын

@@JasonYadlovski That would be great!

@user-ow9wc1xo8q Жыл бұрын

Молодец спасибо ВЫ классный Смотрел Вас очень пригодилось Спасибо за то что поделились опытом !

@JasonYadlovski Жыл бұрын

You’re welcome, thank you for watching!

@UncleStewTheOldManOnTheBlockTM Жыл бұрын

Thanks!

@JasonYadlovski Жыл бұрын

You’re welcome! 😁👍

@JasonYadlovski Жыл бұрын

Thanks so much for supporting my channel!

@UncleStewTheOldManOnTheBlockTM Жыл бұрын

@@JasonYadlovski you are welcome

@kapfe102 3 ай бұрын

Very helpful - thanks again! I wonder: What about the parts that are still, after compression, in the red (above -12 db)? Should I use a limiter in addition to compression or would that just mean I‘m not using the compressor right?

@JasonYadlovski 3 ай бұрын

It’s ok if the meter goes into the red a little just as long as it’s not peaking at the top of the meter.

@kapfe102 3 ай бұрын

@@JasonYadlovski Got it, thanks! You‘re the best! 😊

@masterof 2 жыл бұрын

I have seen someone showing a plugin in a music composing software, in which it can show the waveform in the timeline displaying the waveform before and after the compressor applied, rather than only showing while playing back. I wish Davinci Resolve can add that too - wish list for the next version! Another question: When should we use "Vocal Channel" from the effects?

@JasonYadlovski 2 жыл бұрын

Waves might have a tool like that, I’m not sure. Regarding the vocal channel effect, it really just combines a bunch of other things in a simpler form. You can use that or do them manually for more options.

@Zpurt 2 жыл бұрын

Hi again im so sorry if i am interupting you or anything but when i hower over my clips in the media bin i can hear audio but when i import the clip the clip only gets imported without any audio and i dont really know the issue since im new to the program...

@JasonYadlovski 2 жыл бұрын

What tab are you working in? Cut or Edit?

@illeodavinci Жыл бұрын

Great video, i have a question, i have 8 minutes of voiceover where i have edited out pieces i dont like, how do I make the audio track whole again so i can pitch it all a bit without having to do singular clips one by one? Thank you so much in advance

@JasonYadlovski Жыл бұрын

I would just apply the Pitch effect to the entire track in fairlight, not to each clip.

@Frameable Жыл бұрын

Very helpfull

@JasonYadlovski Жыл бұрын

Glad it helped!

@mshea5906 2 жыл бұрын

Excellent tutorial! Is there a way to save the settings as a preset?

@JasonYadlovski 2 жыл бұрын

Yes, you can save presets - check out this video: kzfaq.info/get/bejne/otKPbNernbebk4U.html

@jaymurray6051 3 ай бұрын

Pressing alt forward slash only activated it for a second it went on to play without showing the meters any ideas ?

@JasonYadlovski 3 ай бұрын

If you are in the current version of resolve, you only need to set the in/out points, hit the loop button and you can use the spacebar. You don't need to use Alt / any more. 😜 Maybe try that.

@snugglesdbear676 Жыл бұрын

I am coming to you because you have more audio fix videos than anyone else! I'm on a Mac and when I download my videos from DaVinci Resolve the sound is REALLY scratchy! Not when playing the timeline...but only after rendering and downloading! Please help me! I didn't see your videos on this problem but felt like you are the Master. Thank you!

@JasonYadlovski Жыл бұрын

Hi! That sounds OK in da Vinci resolve, sounds like it’s an export a problem. Can you tell me what export settings you are using?

@snugglesdbear676 Жыл бұрын

@@JasonYadlovski Thank you for your quick reply. I realized later what the trouble was....a dumb mistake on my part. But thanks again for getting back to me so quickly and for the excellent assistance you give in your videos!

@crayzmarc Жыл бұрын

Shit I didn't know there was a Pt II and found this just when I needed it!

@JasonYadlovski Жыл бұрын

AWESOME!

@stivosaurus 2 жыл бұрын

Does too much compression make the talent look shorter? I was just starting to understand video and color, and now *audio* comes along and it is just as complicated! Sheesh! But this helps a lot. Thanks!

@JasonYadlovski 2 жыл бұрын

Lol, the talent doesn’t look shorter, it’s just audio. 😜 thanks for watching!

@janiselmeris5705 2 жыл бұрын

16:35 Do you apply those settings to the music or to the voice? I would expect slower release to mean more compression, so more reduced/farther away sound. If it is applied to the voice, then the voice is more reduced, if it is applied to the music, then the music is more reduced.

@JasonYadlovski 2 жыл бұрын

You are applying the settings to the voice track, not the music track.

@joedc6995 8 ай бұрын

If I’m making a movie and some scenes sound more dramatic than others is it common to put that dialogue scene on another track and add a compressor just for that scene?

@JasonYadlovski 8 ай бұрын

Yes, very common to use many audio tracks for each different type of audio, different scene, etc. I'd use as many tracks as you need. You can literally have thousands if you want to.

@movietrailer4113 Жыл бұрын

excellent analysis of the 👉Copressor tool 👈 Excellent understanding of the tool - inspires confidence in proper use

@JasonYadlovski Жыл бұрын

Thanks!

@MigraineReleef 6 ай бұрын

OK, I lowered my audio levels down to the green and yellow and then made adjustments with the eq and compressor. But, you said you would finish by telling us how to make it louder in the end after the editing was done... but you didn't. Please advise.

@JasonYadlovski 6 ай бұрын

The last step in the process is the check the overall loudness which would include bringing everything upto the loudness levels you want. Here's a video on it, it's little old, but still works the same way. kzfaq.info/get/bejne/id-Hea-Emby7pnU.html

@benjaminjohndevelopment Жыл бұрын

Great video Jason, gave me the confidence to jump in and have a go using fairlight. Q - when in the process do you make all of these audio edits? do you drop your clips into media pool put em together and then edit audio before editing and cutting the content or the other way around? what are the pro's and con's?

@JasonYadlovski Жыл бұрын

Hi Benjamin! Typically I edit my video then work w/ the audio after my video is edited together. I'll usually set my audio levels while I'm doing my initial edit, just to make sure it is loud enough. If you've got different locations, different voices, etc., I would separate them all into their own tracks so that you can make edits specific to each person, mic, environment, etc. Hope this helps!

@benjaminjohndevelopment Жыл бұрын

@@JasonYadlovski thanks Jason, really helpful. I watched both videos and subbed ;-) managed to edit the audio on my video about How to be a World Class Listener - the compression seems good though it sounds a little low/deep, be interested to see what you think?

@JasonYadlovski Жыл бұрын

Thanks for the sub! I'd be happy to check it out, drop a link here if you can.

@benjaminjohndevelopment Жыл бұрын

@@JasonYadlovski kzfaq.info/get/bejne/bsx9ZK5hxMC2qZ8.html

@davidshuttmedia373 Жыл бұрын

Mix does a little more than being an opacity though since if you put mix to 100% it makes the audio much louder than the original

@JasonYadlovski Жыл бұрын

👍

@realgouravverma 2 жыл бұрын

Hi, I have a question. I am planning to make screen recording videos. I choose the OBS studio software for screen recording. So should I record my audio in OBS studio or should separately record my audio in other software like audacity and then sync it later with the screen recording? Which will give me better audio.

@JasonYadlovski 2 жыл бұрын

You’re probably okay to record in OBS. That way everything is synced up and you don’t have to worry about it. I’ve used it for recording before, I’ve also use my other screen recording software the majority of the time and that works just fine. I don’t notice any difference in the program I use between recording directly into Resolve versus using screen recording program.

@realgouravverma 2 жыл бұрын

@@JasonYadlovski ok thankuu

@elghark 3 ай бұрын

After so many of your videos I watched I now have a dubt: do I have to use the Compressor/Limiter on each audio tracks or just on the BUS track? I explain: - I first started by normalizing all audio tracks within youtube targets (-14 LUFS and -1 PEAK) - Then I moved on Fairlight and selected the BUS Dynamics. - On Compressor I changed the threshold, ratio , gain and limiter - Finally, always on BUS track, I chose a LIMITER plugin and put "threshold" to -2 dcb and adjust the gain. (not sure if this step was redundant with previous one) The final outcome it's not bad and by checking the loudness history (toggle automation) I see it's definitely close to my target (confirmed watching Loudness levels). However....I see that in very few occasions, one of my audio tracks, has peak target over "-2" and even higher than zero. I fear that KZfaq will compress and ruin everything. For this reason I ask if I have to use these dynamics not just for BUS track but for every tracks too.

@JasonYadlovski 3 ай бұрын

Hi! There's nothing wrong with using the compressor/limiter on the bus, especially if you only have 1 audio track to work with. Essential then it's the same as doing it on the single track. However, if you have multiple tracks with audio, you may want to do it on individual tracks because it's likely that each audio might need some different settings. I like to set all my levels/dynamics, etc. on each track, then just use the master bus to do my mastering and meeting the loudness I want. But for basic projects, it's ok to do the work on the Bus if you are getting good results. 👍

@elghark 3 ай бұрын

@@JasonYadlovski Ok thanks a lot!

@AuntieRachelsChaoticKitchen Жыл бұрын

Hi Jason, thank you so much for sharing your knowledge. I have a question; when I play around with volume & compression to set the levels to KZfaq's preferred (-14 LUFS/-1.5 TP), my meters go into the red (between -10 and -6). Do you any thoughts on this? Audio is really new to me, and I don't fully understand what I'm doing!

@JasonYadlovski Жыл бұрын

Hi! Thanks so much for checking out my videos. It’s OK if the meters are between -10 and -6, just make sure you’re not peaking all.

@AuntieRachelsChaoticKitchen Жыл бұрын

@@JasonYadlovski thanks for your speedy speedy reply. Just to check, is peaking going above 0, or above -1.5?

@JasonYadlovski Жыл бұрын

Picking is whenever the meter hits zero. I like to set a limiter at -1.5 just to make sure nothing is peeking. I’d rather be a little under than a little over. 😜

@JasonYadlovski Жыл бұрын

That’s for LUFS levels not individual track levels.

@AuntieRachelsChaoticKitchen Жыл бұрын

@@JasonYadlovski thanks again!

@kingkillproductions5739 Жыл бұрын

Hi mate, thank you for these videos, super helpful. I have a question, I am in post production on my film and I have already tackled and have a grasp on EQ notching but one aspect of dynamic compression has me stumped. The dynamics are track-based, my dialogue tracks are separated into each character/cast member, but from line to line or scene to scene the dialogue changes do to proximity to mic, location, and mic used..my question is, is there a way to work on dynamics clip to clip? If not, I’d imagine the only way to work around this is to use multiple tracks grouped into mic/cast/location? I hope this makes sense. I tried following along with you by choosing a few lines from a scene and it worked great, but then the same dynamic settings on another line didn’t work so great. Hoping you can help. Cheers

@JasonYadlovski Жыл бұрын

You're welcome! You don't have an option to work w/ dynamics on a single clip unless you applied an effect to the single clip. I would separate the scenes & actors into separate tracks so you can edit them as necessary. You can then send all of the same actors audio tracks to a bus and then apply some effects or anything else that they would all receive anyway. That way each track doesn't have the same effects, there's just one instance of an effect on the bus for that character. (this is assuming the settings would be the same for all of the actors tracks.) Does that make sense?

@kingkillproductions5739 Жыл бұрын

@@JasonYadlovski yeah that makes perfect sense, where any given effect is applied to a single characters dialogue that would work for the entire film I can send to a bus and apply it just once instead of for each of their tracks. The film doesn’t have a huge amount of dialogue, so although it’s more work I feel more comfortable at times working clip to clip. I appreciate your response, I’m still learning a lot about sound editing and it’s a huge learning curve. Thanks again!

@kingkillproductions5739 Жыл бұрын

@@JasonYadlovski oh, also, I’ve been using the EQ a little differently too. Ive been applying the high and low pass filter to the entire track but then I EQ notch clip to clip, therefore I can target specific frequencies for each clip and still having up to 4 bands to work with. There’s no problem working like that is there? Although it obviously is a more tedious approach.

@BCE-111 2 жыл бұрын

Thanks Jason. 👍Looking forward to watching this later. Just a friendly correction. Typo. In your description you said, "between the QUITE parts and the LOUD parts". You meant QUIET parts. :-)

@JasonYadlovski 2 жыл бұрын

Ha! Yeah, I’m a terrible speller and spell check doesn’t seem to work everywhere! 😜😁👍 thanks for letting me know.

@duanebowman9595 2 жыл бұрын

I got the Alex audio bulter last year and shut down for a bit. Now I don't see anyone talking about it?? why??

@JasonYadlovski 2 жыл бұрын

Not sure. I know a bunch of us made videos about it and nothing has really changed with it. I know people still use it.

@duanebowman9595 2 жыл бұрын

@@JasonYadlovski Was it worth it? or was it just a fast load and now not as good as just using resolve sound edits?

@hurricanesails Жыл бұрын

Jayson, do you have a video on how to adjust audio levels with one clip/section within a single track? I've created a voiceover and have had to go back and redo sections to correct aspects other than sound - like changing the copy or a stutter. This was done the same day, with the same mic, in the same position, however my voice seems really bassie/deep in one of the corrected sections. How do I correct just that one segment? Thank you

@JasonYadlovski Жыл бұрын

Hi! All you need to do is select the clip, and adjust the volume or gain line for the individual clip. This video might help you out: kzfaq.info/get/bejne/e7Skacerv5immGQ.html

@hurricanesails Жыл бұрын

@@JasonYadlovski J, Thank you. Watched it and took cheat notes for future review. My question was not worded correctly. I'm doing a voiceover track for a project and 90% of the recording was great, (followed your instructions) but there were a few word bobbles and things that needed to be corrected. What I need to learn how to do is use your guide "make your audio sound professional 1&2 for JUST the re-done clip segments. I'm using the same mic (samson G-Track pro) and as best that I can remember in the same position as the first recording. I have cut out the parts that needed correcting and recorded new versions on a separate track. When they are corrected and match the main section I will slide them back into the missing segment of the 90% good track. Currently the redone tracks sound basey or low end and far less crisp than the good track. I'm not exactly sure what I did to correct the GOOD track - probably followed your instructions. Thank you very much. Added to all that I need to get the good and re-done sections to sound the same.

@JasonYadlovski Жыл бұрын

I got you, I would put the new recordings in their own track, so you can modify them on their own using track level features. They don’t have to be in the same track as the original recording.

@hurricanesails Жыл бұрын

@@JasonYadlovski Thanks. Already tried that. (after I sent the comment yesterday) Unfortunately not knowing how I tuned the first 90%, I'm not getting the the new stuff to match up. The first 90% sounds great and I'm trying to get the redone stuff to sound as good. Is there a way to uncover all the changes that I made to the first track and then apply those changes to the "fixed" segments? Thank you

@JasonYadlovski Жыл бұрын

You can copy everything from one track onto the new track. I’m assuming you adjusted the EQ, the effects, some dynamics maybe. I’m not sure else what you would be changing that you wouldn’t be able to just see if you looked in Fairlight. If you adjust an individual clips, you can select a clip, go to the inspector, go to the effects section and see what effects you applied. Or see any other changes you may have changed only in the inspector. There shouldn’t be anything that’s hidden, you should be able to see all of it.

@RussellWatsonFMHL 2 жыл бұрын

Why does it look like Audio 2 still goes into the RED even after compression?

@JasonYadlovski 2 жыл бұрын

It may dip into the red a touch, but as long as the meter isn't getting pinned to the top or reaching the top, it should be fine. You can always add just a little more compression to grab those peaks.

@RussellWatsonFMHL 2 жыл бұрын

OK, thanks for the reply.

@Zpurt 2 жыл бұрын

Hi do you think i can get some help? So when i am playing my clip in Davinci resolv there is sound but when i hover over it with the clip line i no longer hear enything please help me!

@JasonYadlovski 2 жыл бұрын

Sounds like you need to turn audio scrubbing back on. It’s a keyboard shortcut that can easily be hit accidentally. Here’s a video how to do it (I forget the shortcut off the top of my head) kzfaq.info/get/bejne/pK6AnNthrprVqKs.html

@Zpurt 2 жыл бұрын

@@JasonYadlovski Wow i accually worked you earned a follower and a like! :)

@JasonYadlovski 2 жыл бұрын

I knew it would 😜 thanks so much for the sub and like! Best of luck on your project and welcome to the community!

@Zpurt 2 жыл бұрын

@@JasonYadlovski Thanks man!

@Zpurt 2 жыл бұрын

@@JasonYadlovski Hi again im so sorry if i am interupting you or anything but when i hower over my clips in the media bin i can hear audio but when i import the clip the clip only gets imported without any audio and i dont really know the issue since im new to the program...

@joe-jet Жыл бұрын

Your voice sounds 1000 times better and more pleasant when you don't shout and speak a little quieter

@JasonYadlovski Жыл бұрын

Thanks man!

@BonelessDota Жыл бұрын

Help. In Fairlight, in mixer, I can't see Dynamics even after I ticked it to show up in the 3 dots. I'm using 18.1.1. Anyone knows? Thanks in advance :)

@JasonYadlovski Жыл бұрын

Hi! You might have to scroll up and down in the area above the mixer.

@BonelessDota Жыл бұрын

@@JasonYadlovski I see yea, thanks, I was stuck here an hour. Cheers! ty

@BonelessDota Жыл бұрын

@@JasonYadlovski Sorry to bother you again, I cannot find voice isolation. I don't see it neither in inspector audio nor fairlight mixer. I can see dialogue leveller though.

@JasonYadlovski Жыл бұрын

No trouble at all, if you’re running the free version, there is no voice isolation in there.

@BonelessDota Жыл бұрын

@@JasonYadlovski I see, thanks so much for your help :)

@ChrisGeeReacts 2 жыл бұрын

Is Resolve 18 out yet or is it still in Beta? Thanks

@JasonYadlovski 2 жыл бұрын

Still in Beta - version 6. I imagine the full release will be out soon.

@ChrisGeeReacts 2 жыл бұрын

@@JasonYadlovski Awesome thanks. Mine is still on 17, i figured i would keep it that way till 18 comes out

@JasonYadlovski 2 жыл бұрын

So far version 18 has been very stable for me on Mac. Hopefully the full release will be even better. 😁👍

@itsjenks 2 жыл бұрын

First?? I think I’m first. Oh man.

@JasonYadlovski 2 жыл бұрын

Looks like your first! 🏆😜

@benjaminjohndevelopment Жыл бұрын

Thanks Jason applied most of what you said and got to this kzfaq.info/get/bejne/bsx9ZK5hxMC2qZ8.html think i skipped the band 3 stage ;-)

@JasonYadlovski Жыл бұрын

Nice, sound good!

@projekt250-tube 2 жыл бұрын

I hate to be that guy, but there's a spelling error at this mark: kzfaq.info/get/bejne/jLh7gtN2sajOZqs.html Just wanted to make you aware of that. Other than that, great video. Thumbs up.

@JasonYadlovski 2 жыл бұрын

It's all good, I know I can't spell. 😜 They gotta make spell check work in Resolve. That would be super helpful fo me. 😁 Thanks for watching!