Congratulations on the baby. Can you compare layer adhesion to normal PLA and PLA+?

Okay the hulk convinced me to get a few spools for testing, the print looks really clean.

Really nice work! What’s your ideal speed and temp when working with META?

thanks for the review, i purchased a k1 max and this filament is awesome for visual quality. i would suggest to print VFA tests in orcaslicer for the rated temperature range in 5°C steps. then write down the best temp/speed combo. slice a model, check how fast you can print the slowest outer wall area in preview view, then set that speed as max for outer walls and set the temperature you found out for that speed. reason: vertical lines will dissaper at a specific speed/temp combo, those depend on the stepper motors, belts and the frequency they create. print will turn out uniform, no matte and glossy areas, no vertical lines and you can pick if you want it more glossy or matte. hot and slow = glossy, fast and cold = matte

great video~

Hello, I’m new in 3D printing, I started with a PLA Polymaker PolyTerra, and I took a reel of this white brand, the Polymaker melts over 210 degrees, this a little less, so I would like to ask you if possible, some parameter of the layers to set in Cura. Thanks, and Congratulations on the beautiful Baby. Bye bye.

What settings have you used? I can't just print with this material!

Can you say me, temperature and speed use for PLA META pls ? 😊

It Breaks overnight when you let it on the printer,so everytime if it not used it must be removed from the printer.

The yellow and pink look really good