The Best Black PLA Filament on Amazon for LESS than $20

No video

The Best Black PLA Filament on Amazon for LESS than $20 - Compared

Рет қаралды 10,473

Күн бұрын

In this video, I test four cheap black PLA filaments that I purchase on Amazon Prime for less then $20
Buy them here:
Kingroon = amzn.to/3EaxVPI
Jayo = amzn.to/3TFbyY8
Overture = amzn.to/3AisSf3
Inland = amzn.to/3AhB92P
SUBSCRIBE - www.youtube.co...
----------------------------------------
*This is not investment advice. All opinions are my own. Sponsors are acknowledged when applicable. Some links in the description may be affiliate links that if you click on one of the product links, I may receive a commission at no additional cost to you. As an Amazon Associate I may earn a small commission from qualifying purchases.

Пікірлер: 48

@glennbrian3d Жыл бұрын

SUBSCRIBE - www.youtube.com/@glennbrian3d?sub_confirmation=1

@chrislarosa3327 7 ай бұрын

Really love this video very informative. The one thing that I would like to see though is more lighting on the projects you printed it’s very hard to see for me. I look for layer lines and imperfections which I’m sure this is what you’re trying to show but I cannot see it in the video but all in all you do a very good job in reporting on these different brands thank you I totally enjoyed it

@Spd_Rcr Жыл бұрын

I just got a 2 pack (2x 1kg)of Elegoo black PLA for $23 and change on Amazon. Nice tight wind. Prints great.

@glennbrian3d Жыл бұрын

I'll have to give them a shot soon and review them

@sdfsdfsdf202 Күн бұрын

Elgoo and creality are both very cheap and good.

@glennbrian3d 20 сағат бұрын

Thanks for the input!

@JaimeWyant 11 ай бұрын

Nice video! Only criticism is the lighting is poor when viewing the towers and benchies. Still, good stuff 👍.

@glennbrian3d 11 ай бұрын

Thank you for the comment! Yeah I realized this shortly after especially with the black being so dark, definitely going to have better lighting in the future

@deathedell215 Жыл бұрын

one tip, for the layer adhesion, snap them each the same as you did the one before, on the first one, you snapped it from the sides, but on the second, you snapped it with pressure added in the middle

@glennbrian3d Жыл бұрын

Thank you for the input That's the one part of the video that I'm not really a fan of so far as the layer adhesion test I want to come up with something a little bit more scientific lol

@vlab4671 Жыл бұрын

This was great! Thank you so much for all the effort you put into this video!

@glennbrian3d Жыл бұрын

I'm glad you liked it!

@Hacky2447 10 ай бұрын

i have been using overture for a while now, and its very consistent. Unfortunately its not offered in very many colors.

@glennbrian3d 10 ай бұрын

Yes this is one of the problems with that brand unfortunately but I've had good luck with them in most of the colors I've tried

@Dman5720 Жыл бұрын

Just subscribed to your channel the videos are great! If this was a series that would be perfect!

@glennbrian3d Жыл бұрын

Thanks!

@gerolori 3 ай бұрын

I've read on multiple reddit posts tha sunlu, jayo, kingroon and another brand are all the same under different names, so I would add Kingroon

@glennbrian3d 3 ай бұрын

In my experience kingroon is definitely different, at least the quality of material for sure

@randomblueberry5019 Жыл бұрын

Thank you 🙏

@glennbrian3d Жыл бұрын

Glad I can help!

@dbtest117 Жыл бұрын

Nice. One thing though when watching the video you seemed to get clogging in many prints, and it's not clear from the video if you got the clog removed between prints.

@glennbrian3d Жыл бұрын

The Kingroon was clogging because of the bad quality of filament I'm pretty sure

@dbtest117 Жыл бұрын

@@glennbrian3d I guess, as long we are not talking abut a clogged nozzle that makes the issue worse over time.

@gamer___r2341 Жыл бұрын

Nice Video but please Full HD or 4K videos!

@glennbrian3d Жыл бұрын

I move this from my Etsy channel maybe that's why it's not 1080? Is the quality bad?

@MkeMadeE 5 ай бұрын

Can you do pla+ please

@CatFoodDraino 6 ай бұрын

I like jayo

@glennbrian3d 6 ай бұрын

Yes it's usually good

@Ghxzt2161 Жыл бұрын

Elegoo is doing a sale right now a 10 pack of 1kg black for $99

@glennbrian3d Жыл бұрын

You have to wait so long for the order though

@Ghxzt2161 Жыл бұрын

@@glennbrian3d that’s true but I got plenty of pla to last til then

@TheExAquarist 9 ай бұрын

200? 185? What setting is this?

@Foxy-wh4jy 6 ай бұрын

if you mean the numnbers on the temp towers, its the temperature of the nozzle

@peterpeter5666 8 ай бұрын

You need more light couldn't see the models very well

@glennbrian3d 8 ай бұрын

Thanks for the comment Peter! Yeah I realize this afterwards especially with the black my other videos should come out a lot better but black is so hard to capture lol

@calebdebass3882 Жыл бұрын

In your opinion what was the best?

@glennbrian3d Жыл бұрын

at the time of filming i would say jayo but they have gotten expensive since ive made thie video, overture is what i would go with atm but prices change all the time

@ezloot4u433 10 ай бұрын

@@glennbrian3d whats the best now. Nice video

@glennbrian3d 10 ай бұрын

@@ezloot4u433 it depends I usually do a short when I see a good deal

@ezloot4u433 10 ай бұрын

@@glennbrian3d Thank you

@kitchenbriks3685 11 ай бұрын

Your lighting needs work man other than that good info

@glennbrian3d 11 ай бұрын

Yeah after I made the video I realized this lol, thanks for watching!

@vastinkelter1393 Жыл бұрын

Very dark video - please consider using more lighting as we can't see any details, especially on black surface.

@glennbrian3d Жыл бұрын

Hi thanks for watching! Yeah please check out my gold video I'd like some feedback on that since that's the second one I did The black was very difficult to come out on film