A realistic & affordable BEAUTY! - FMS 1500mm Cessna 182

Рет қаралды 100,585

18 күн бұрын

I got this plane last minute so instead of a full review, I decided to do some initial impressions on a real maiden. This plane flew great! And I am excited to put the BRAND NEW FMS Cessna 182 1500mm RC Airplane to work and see how it does with some FPV modifications!
Interested in this plane from @fmsmodelRC ?
Check it here: bit.ly/Scalecessna
Discount Code: ReferralGarageRC
MY REMOTE SETTINGS:
RATE EXPO
AILERON: 100%. 30%
ELEVATOR:100%. 25%
RUDDER: 100%. 25%
Flaps:
FLAP ELEV
POS 0: 80%. 0%
POS 1: 0%. 10%
POS 2: -40%. 14%
SPEED: 2.0s
NEED A UNIVERSAL TRANSMITTER?
Check these out: bit.ly/RCREMOTES
Products in the video are recommended for kids ages 14+
CHECK ALL THE PRODUCTS I USE:
hoo.be/jaysrcgarage
There are affiliate links in this video

Пікірлер: 165

@timn4481 5 күн бұрын

ive got this model. have had it for 5 years. it does everything a scale and an aerobatic plane can. i installed a stabilisation system and it flies like a dream- rock solid. scale planes with a stab system are a must IMO. pop it into high rates and give it some throttle and itll do inverted snap rolls, tight inverted loops, knife edges- you name it. and thats on 3S. i havent even tried it on 4s. im surprised he said it wont go vert here, mine goes hard vertical on 3S... you can fly it for 15 minutes if you fly it scale like and barely past half throttle- even less. the flaps are really just a gimmick. you dont need them for takeoff or landing.

@sgd5k292 11 күн бұрын

As much as I like this C-182, I would REALLY love it if FMS came out with a C-177 Cardinal or even the RG version. FMS has outstanding models. Nice demo of this magnificent model!

@tomanderson9979 16 күн бұрын

You are so right, that is a BEAUTIFUL scale plane and you fly it just as beautiful.

@JDDupuy 16 күн бұрын

Don't forget to mention the 5 dollar plastic gear servos on a 300 dollar plane!

@eminstinct4114 16 күн бұрын

those 5 dolar servos should be fine if you check them before each flight to make sure they spin smoothly

@marcellowithtwols 10 күн бұрын

@@eminstinct4114 They usually get stuck AFTER you've been flying for a while. Then you learn about it after you're done crashing. Been there, done that.

@mickydee6550 16 күн бұрын

That’s a beautiful scale airplane with pretty decent performance. It looks like it will do plenty of aerobatics if you manage your power and fly it on the wing. All in all, a pretty solid offering at $300.00. I would consider this to be a direct competitor to the E-Flite Cherokee.

@brettcurrier 16 күн бұрын

Sweet model! Can’t wait to see the FPV!

@Jays_rcgarage 16 күн бұрын

Very soon!

@alexandermiller5034 15 күн бұрын

Still rocking the vintage flyzone select scale cessna, and i haven't seen any model as scale as it but this looks like a very nice future upgrade.. i must have a cessna in my hangar!!!

@gisall8205 16 күн бұрын

Can't wait to see your upcoming video with the FPV set up.

@pewtubee 16 күн бұрын

She just wants to fly! Beautiful!

@MIKEH.777 6 күн бұрын

Im loving how it looks and how it flys. Please when you make it FPV put rubber wheels on it, that would be a major change. It's going to be really cool when you have it FPV and you'll be able to see the guys arm moving. Keep up the great work and God Bless you and your family ✌️ 😊👍🙏🏼

@AL-RCjunkie 16 күн бұрын

FMS flap servos usually need to be over driven to about 125 in spektrum servo setup, to bring them up level. Those rock hard tires are always loud. The 3 blade prop is going to give you that low and slow flight performance most folks are going to want to do with this plane. It's definitely on my short list. 👍

@Brakballe 12 күн бұрын

Would have switched the wheels to foamies ASAP

@Shatheedjameson. 16 күн бұрын

Very happy, I bought my first edf

@ccv3237 5 күн бұрын

Beautiful!!!! Awesome job!

@TonyWentworth-xt7te 7 күн бұрын

I have the exact same model, first made by Dynam called the Skytrainer 182, who sold all spares to FMS. Great flier!

@ianevans2854 9 күн бұрын

What a gorgeous looking model I'd love one of these 😎 🔥 😍

@SnoMoJoe1 16 күн бұрын

This new 182 looks great. I have the older Sky Trainer from FMS and I love it. My plane is getting a little worn out. This will make a great replacement.

@fpvdogfight 16 күн бұрын

Gorgeous plane! Looking forward to your scale head-tracking FPV flights on this beauty!

@budlawrence4847 12 күн бұрын

I enjoy the high wing planes for sure the Cessna is really cool

@nathanwildthorn6919 16 күн бұрын

Love that 182! Wow, so easy to operate! Yeah, the gear wheels do sound pretty hideous. Great video and awesome flying, man! 😊

@glennwirth7334 15 күн бұрын

Lowered my stress level watching 🤠🥳🤙🏼

@iamtherealzim 16 күн бұрын

Awesome looking plane!

@isaiahdiaz9768 16 күн бұрын

Love scale planes !🤙🏻🤙🏻🤙🏻

@tlfunk51 16 күн бұрын

Nice plane, thanks for sharing

@Nutzer5246 10 күн бұрын

Nice plane and you pilot skills are fabulous.

@RetrocarStyle 4 күн бұрын

This is great! They should make a Piper Cherokee Arrow!

@robertpawlusiak 16 күн бұрын

Beautiful !! But those Wheels sound like there gonna fall off 4 yrs ago I put a FPV Camera on the Pro Boat Tug from Horizon Hobby when over 400m Distance it helps to line up the Tug to Boat.

@user-qg7dz4yp7x 16 күн бұрын

Hi Jay you are definitely a super pilot and this is one of the most beautiful Cessnas I’ve seen in a long time I absolutely love your channel my friend Sincerely abundant love and blessings from Canada sincerely Richard ❤

@mickeyg.c.1654 16 күн бұрын

Can't wait to see the fpv mod

@tonyrollman3991 15 күн бұрын

That thing is a beauty even better in Red

@theHedgehogPro 15 күн бұрын

Had this exact plane under the "dynam" label. It was fairly durable, however, the front gear is weak and the metal is quite plyable. Bent the first flight landing on some rough grass. Ended up replacing with a different nose gear.

@itzjoeylo4501 16 күн бұрын

I bought the Banana Hobby version of the 182, great 👍 value.

@rva1945 14 күн бұрын

I bought the 1300mm Dynam C182 and out of the box I noted the nose gear was a failure. It collapsed in the 3rd landing, and it was a smooth one. I re-built it as a reinforced version and so far so good.

@TonyWentworth-xt7te 7 күн бұрын

I can attest to that fact. Front gear is crap. I changed mine with a 3D printed, spring loaded shock nose gear. So much better than OEM. The Dynam Skytrainer 182 used the exact same gear. FMS purchased the materials from Dynam. Also, performance greatly increased with 4S packs. Just be careful not to overheat the motor and use a 40 amp sc, which I think came stock with the FMS. Dynam used a 30 amp, which the 4S was overheating. Great flier!

@anthonyf.9170 16 күн бұрын

Very nice looking plane. 👍

@glennwirth7334 15 күн бұрын

Lower my stress watching 😎🤙🏼🥳

@karlharrelson1091 14 күн бұрын

Yup, those wheels/tires. They might be square. Then the other thing is the engine sound. Not quite a good match to the real thing. But otherwise, really nice.

@jayaustin3096 16 күн бұрын

Those wheels make my teeth hurt. Your right. Great looker if you have a runway. Love your channel. Thanks.

@straightup7up 13 күн бұрын

pretty plane

@USNVA11 16 күн бұрын

That would be an excellent second purchase for a beginner.

@DronemanJoeRc 16 күн бұрын

Im not sure if I want the blue or red? I have the HH Cirrus red and and its a great flyer but id dont know red or blue and I also have the HH rv7 blue..idk??? red looks better in the sky but blue is my fave color???

@michaelcarslay959 16 күн бұрын

Do spektrum remotes work with FMS RTF planes? Or do you have to switch out receiver?

@did3d523 16 күн бұрын

cant wait fpv mode !

@timneil9418 16 күн бұрын

Great video Jay, karate Tim 🥋🙏🇬🇧♥️

@user-uu1wc6yz5z 16 күн бұрын

That's reallly cool. For anyone starting out..... or someone that has been watching these sorts of vids , you certsinly showed how user friendly it can be for a furst timer . Wonder if there is a "" how to "" vid for learning how to use it properly , from the manufacturer ? ?

@3DPrintHangar_RC 16 күн бұрын

The fact that a plane THAT SCALE and that BEAUTIFUL can hover is just BANANAS🤯 Not apples… not oranges 😂😂

@Atmadimadimadi 15 күн бұрын

Hi Jay, compare to timber and ranger, which one has the most aerobatic capable ?

@tboystoys5682 12 күн бұрын

I ordered one. I had to order it from China and it’s on its way I can’t wait

@diamondbeach9322 13 күн бұрын

Jay where did you get this from and when will it be avaliable to buy? Plz reply jay kujan

@bndahi8251 16 күн бұрын

5:29. she lands just like my students!!!

@Grootman 15 күн бұрын

Them wheel hey!

@jbml3642 16 күн бұрын

Very nice, how big are the wheels for start and landing in grass?

@PatBALEX 16 күн бұрын

You can change the wheels out for rubber ones.. Or you can spray Silicone lube on the wheels.. Works for a short time..

@dynevor6327 16 күн бұрын

No kidding soft tyres. Most people would rather pay a couple of dollars up front if they don't have a kit of spares on hand. Or you can do what I do as do many others, fly off grass.

@henryefird1806 12 күн бұрын

I’d like to see some grass runways as lots of clubs only have grass. Nice bird. Good flying bro.

@mortenjohannsen9493 16 күн бұрын

I just bougth the 1 edition of it, 11 years old, With the fms x-6 transmitter. First lunch rigth in the ground 😪 so now i'll be waiting 2 days to do a second launch. Got a pitts to but With my amatur fligthskills i dont dare to send it up before i have learnt to fly the cesna 182 1400mm😂

@Mossman04 16 күн бұрын

Dope. Everything’s better with FPV. Damnit, I came from drones, just went to cars and crawlers, now to planes thanks to you 😅

@Jays_rcgarage 16 күн бұрын

Ahahaaa welcome to the plane world! I love cars. FPV’ing those too! All videos will be coming soon.

@theborg269x 16 күн бұрын

Everyone wants one but it's a hanger queen I feel like ide want to fly a more fun plane but if it had floats than that adds to the fun

@chuckpippin8415 16 күн бұрын

The wheels are definitely "nails on the chalkboard"...screaming for a small dab of axle grease. Had several of these 'screech-wheeled' planes, so far all quieted down after lubing.

@PoochAndBoo 16 күн бұрын

That is a beautiful model. But, man, FMS has gotten a lot of mileage out of that pilot. I think he may be in every FMS plane that I've owned.

@Jays_rcgarage 16 күн бұрын

AHAHAAA! Time to update the Pilot!

@PoochAndBoo 16 күн бұрын

@@Jays_rcgarage Yeah, think it's time. I had their old Skytrainer, which of course was a 182. What was that, 10 years ago? Same pilot.

@SoloCrimeWave 8 күн бұрын

😅

@tomasdanko9785 4 күн бұрын

Pls can you do a video about a volantex asw 28? Its a 2,6m glider

@3ifmCinematography 16 күн бұрын

Such a beautiful rendetion on the 182...Why do they so often get the lights wrong?

@simonmayston1059 11 күн бұрын

Did the plane come with the batteries??

@danielreiss1156 9 күн бұрын

Is it a foam jobbie?

@avkits 16 күн бұрын

Is it a ready to fly kit out of the box? If so it is a great deal for $300

@PaulV-cn6jo 16 күн бұрын

Hey jay awesome plane, I’ve barely gotten into Rc planes. First one I got was the Fs sensei trainer but came in for a nose dive landing on some pretty high grass. Since then haven’t gotten another because they’re a little pricey. But I’ve been messing with the 3 channel airbuses and made some pretty cool configurations. Please like if interested and I will release detailed videos on what I did with them for you to show all the fans/aviation freaks.

@michaellui74 14 күн бұрын

Watching this video again 👍👍great flying . Can a beginner fly this plane?? Thx

@user-qf2qb6eg7t 13 күн бұрын

NEED to Square the FLIGHT Pattern into the final landing Config RIGHT or Left Down wind leg then reduce speed to come into final set flaps IF needed Never on Strong winds !! FLOATS TOO MUCH when applying flaps ALL Cessna scale or Real need some Down elevetator trim to keep app speed tends to NOSE UP !! You're increasing the ROOT of the wing Airfoil curvature .

@brianscutt6298 16 күн бұрын

Do they make float's for it

@Ryanconstine 16 күн бұрын

I’m trying to start rg plane what should I get not over 200$

@OldTimerGamer-pr3ow 11 күн бұрын

I'm looking for a high wing RC plane to get back into flying again. To knock off the rust after an 8 year hiatus. This looks like the one I need.

@Jays_rcgarage 10 күн бұрын

🔥🔥🔥

@107nthGalaxy 12 күн бұрын

nice

@MsDenver2 16 күн бұрын

If it’s supposed to be to scale then they should’ve put rubber wheels on?

@DamplyDoo 16 күн бұрын

Wow you got some early commenters on your videos

@darealestgig2513 15 күн бұрын

Do you fix/repair RC trucks????

@Krooker85 15 күн бұрын

This must be a new version of the FMS 182. My FMS Cessna 182 is very different to this

@CV_CA 16 күн бұрын

What is the total flying weight?

@brookekathryn1980 16 күн бұрын

With how cheap it is.... I'm tempted to add to the hangar....

@JamesBlackmon-hb2er 13 күн бұрын

What is the price range for this

@franciscosilva1672 3 күн бұрын

Gostei muito, onde posso comprar um deste amigo.

@David-yy7lb 12 күн бұрын

Can that plane be binded to a DX6 remote control

@Jays_rcgarage 11 күн бұрын

You would need a Spektrum receiver. AR620 for basic. Or if you want safe and as3X you need a AR630

@HenryKoenig-mt5bv 11 күн бұрын

I love the scale detail, but I’m also a big touch-and-go person, so those wheels make it a no-go for me 😢

@metaljacket2000 14 күн бұрын

I want one

@user-be3lg8os9j 16 күн бұрын

Molto ma molto bello

@cnnw3929 11 күн бұрын

Since I'm too poor to own the real thing, I'm too poor to own this. I'll stick to my DJI camera drones. Thank you very much.

@noswad75 14 күн бұрын

I wouldn't set foot in a Cessna. I'm honestly shocked that that die easy crash plane is still around.

@ChefDuane 15 күн бұрын

I bet the power to weight is a lot different on that than the real thing!

@alwaysflying6540 16 күн бұрын

That's beautiful

@Jencarlopavon 9 күн бұрын

hi jay can you make art plane video I have been thinking to get my first plane!!!

@marcellowithtwols 10 күн бұрын

Unfortunately discount code doesn't work. Even if launching page from link directly above it. Wondering if the code is enough to justify the purchase, when they know full well you'll still need to swap that risky telemetry-free receiver. Who builds a plane without battery telemetry in 2024????

@jnick1909 16 күн бұрын

lol if only a 182 could do aerobatics like that 😂😂😂.

@kd8opi 13 күн бұрын

They can…once.

@kennonvaughan9838 2 күн бұрын

Cool Cessna, I like to have one 😒

@Ljcohe. 16 күн бұрын

How much

@michaellui74 16 күн бұрын

Great video 👍👍new subscriber. Can beginnerfky this plane?? Can you recommend a plane that a beginner can fly that has some speed and look realistic?? plus come with control like a package deal

@Jays_rcgarage 16 күн бұрын

FMS has some great beginner planes. The ranger 1220mm and Piper PA-18 RTF both come with everything you need and have gyros for beginners. I recommend both of them. The Ranger in my opinion is a little more beginner friendly!

@michaellui74 16 күн бұрын

@@Jays_rcgarage thanks for replying looking forward to foward to more great videos 👍😀😀

@fuglmannsson6229 16 күн бұрын

Top gun park flite made a 182 way before FMS

@Jencarlopavon 16 күн бұрын

I am a huge fan but just wondering have you ever flown a real aircraft because you said you've been wanting one of these planes?

@Jays_rcgarage 16 күн бұрын

Yes, I passsd ground school during covid. Don’t want to take flight lessons until I buy a plane and can take them in my own aircraft. Probably do it sooner than later.

@Jencarlopavon 9 күн бұрын

really I didn't know@@Jays_rcgarage

@FishingworldDKOfficial 16 күн бұрын

is it a beginner plane🤔

@SRockwell 8 күн бұрын

❤

@brykalaero 12 күн бұрын

Just grease the axles and wheels.

@user-qf2qb6eg7t 13 күн бұрын

DU BRo products HAS Nice rubber inflated tires they will fit think those are 2 inches dia Check them out on Horizon Hobbies I used to own a Hobby shop in PUERTO RICO for many yrs my DAD was a Pioneer in RC in the 50s till the 77 Vacuum tube radios from Heathkit and ORBIT RC Radios Then came the KRAFT Systems radios GOLD Series and expensive ones the Signature series TWO Sticks versions and Single stick versions My DAD was a Dealer of them as was for OS Engines at World Engines Dist in OHIO