JL Front Door MOLLE Panel Install

No video

JL Front Door MOLLE Panel Install

Рет қаралды 6,497

JcrOffroad

2 жыл бұрын

Kevin installs the JL Front Door MOLLE Panels from JCR.
Learn more:
www.jcroffroad...

Пікірлер: 12

@craigversetti5700 Ай бұрын

Big fan of you guys but for this product on my JTR i had to choose another manufacturer due to not really having much storage room with these ones compared to ones i went with & i didn't want to remove my for panel or drill holes in it , i definitely understand the better securement of the nuts & bolts but using the factory bottom screws along with the metal clip/ bracket the others have & them seating down into the nets surround they are very secure and solid & are ABSOFUCKINGLUTELY mounted stronger than the others !!!Again i love my JCR products & your install videos , i still learned from this Video & it helped me in several ways so please keep it up your fan base is continuously growing !!!!

@wildwoody20 Жыл бұрын

why take the door off and bolt them on when you can just screw them in ?

@GaryDrumm Жыл бұрын

Valid question. 🤔🤷🏼‍♂️

@TwoFeatherChannel 4 ай бұрын

if you worked in the construction field, you would know the difference between a nut and bolt compared to a screw being used in a soft pliable material.

@JcrOffroad 4 ай бұрын

Thanks for sharing.

@wildwoody20 4 ай бұрын

@@TwoFeatherChannel I understand both of them on is more secure but you're not going to be pulling on them and you're not going to be putting that heavy stuff on your door panels. You can't put that much white on there there's not that much room make the door heavier and who's going to be pulling on them or put a 100 lb there. Moses for looks most people put most of the stuff on the back of the seats

@wildwoody20 Жыл бұрын

the nut can come loose then you have to take it off again. screw wont come loose in the plastic

@yakitoriPB Жыл бұрын

Screws can pull out of the plastic. You can use blue loctite on the nuts and they won't come loose