Hey I'm 57 and I'm still running. Unfortunately I don't have any spare parts. 😱

Got a 67 110 & after working on my old 212 these old round fenders are a pain to work on. Even then I’m very grateful for my 67 round fender I bought for $100 & after $300 it’s looking decently sharp to match my 212.

I'm about to buy a 64 in like new condition. I subscribed so keep making videos in this series.

Good info about JD

I'm a new subscriber ine1970 I bought a 120 and later a 140 h3 then a 400 to day l have 110 120 and two 140 h3 to restore thanks for sharing

Well you are at 547 Now closer to that one Mill . About the 3 lugs hubs, John Deere did not have any thing to do with the 3 lugs over 5 lugs. It was not for cost saving, or strength. The 3 Lugs hubs were simply what the manufactory of the transaxles sold at that time. Ever company that produced garden tractors just bought these early 2000 series transaxles with 3 lugs. Companies could buy different Axel shaft tubes with different mounting arrangements. Later when the little bit stronger 2300 transaxle was released it came with 5 lugs and again all the manufactures switched over to that design because it was the only thing available for them to buy. John Deere did advertise a stronger transaxle and with 5 lugs hubs in 65 brochures. I Collect 1964 stuff and done a lot of research on the 64 transaxles due to a few of my 64 are broken. Hope this info helps.

Great info, I learned a lot. I have an JD 110 video/film on my channel called "the American dream". Maybe something you would like? Thx. Magnus

I have a 1964 or higher with cast iron that has the snow blower attachment would you have the picture of the dash different buttons

I think the Massey 7 used a variation of the same transaxle in the 110

I have a extra hood to a round fender and it has lights

Very beginning of video is the first time I've ever seen a tractor moving by itself without somebody sitting on it

Where did you get that book.I need 1 for my 110 will find 1 for the 108

I want to know haw to read the numbers plate on my 110 i want decod my JD 110 I believe in it. 63 it was my grandpas. He left it to me when he past. It has hydraulic tiller on the back. And hydraulic boop in the front.with a hydraulic lift on the the front with a bulldozer push attachment on the the front with some other attachments. As well..if anyone can help me out please let me know thanks

I believe i has a 63 110 not sure how desifer the cod an the tag/ the numbers are kind hard to read.

I have a 63,64,66,67.

Do you have any more of them brackets and wood blocks you would sell? Thank yog

Are you going to make more videos?