What Cold Air intake are you running on your Jeep?? #Jeepwave

Installed mine finally and i love the sound of it on my jeep makes it sound like a v8 with the muffler delete🔥👏🏽

Just completed installing on 2017 Jeep JK. Sounds and rides a whole lot better, definitely can tell the difference.

Always love your videos - I've modded out my interior you have me looking into my first engine mod!

I currently have the stock one that comes with the JK. Im glad you made a video like this because just this past week I started looking at some. Thanks my dude! Keep up the great videos!

Have a Mopar Cold Air Intake on my ‘12 JKU Rubicon. I love it

just installed the same cold air intake but also a throttle body spacer and bang it runs great and sounds killer !!

I installed the full K & N chrome polished intake on my 2012 JKU and love the increased hp, mpg, ect... Definitely worth the $$$..

you should run the afe cold air intake it is very good and doesn't get affected by heat in the engine bay like some metal intakes

Great upgrade

Volant CAI ($150 model) and Volant Throttle Body Spacer ($45 model) here. This looks like a good intake that I hadn't heard of. Most CAI's that are ABS plastic are all pretty much the same. There are some exceptions, such as enclosed boxes to prevent water intake and other vehicle designs. One of my biggest pet-peeves is some companies charging ridiculous amounts for parts, and CAI's are usually a battleground for this. There are few examples worth the $300-$500 price-points that they are demanding. It's funny, because a lot of the Jeep community lambasts CAI's, however they are proven technology for most vehicles.

What’s up AdventureDex loved the vid. I got so excited when I saw a new upload. Next vid you should do a spare tire brake light install, they look super clean!

Good looks!

I like the video, good job.

Great video bro 👍🏾

Loved the dumb split screen edit of throwing the intake back to yourself haha. Good stuff man.

Great vid Dex

I just installed this CAI onto my 2015 Jeep Willys and love the improvement. Instant feel in improved horsepower as well as a much deeper sound. Anxious to see if there's any mpg improvement.

Nice video on the intake. I just have a question about your jpro cluster and how is it doing? Is it still holding up?

I use a Ingen cold air intake and I love it!

Love it! with my dual Gibson exhausts, got to get this. I'm running nothing just stock.

Hey Dex do you still have this? How do you like it and would you still recommend it?

I had an AEM Brute Force polished aluminum cold air intake, with the washable filter on my 2000 Tj. Definitely noticed better acceleration, throttle response, and mpg. Changed out an air raid throttle body spacer with a helix (don’t think they make em anymore) and also noticed faster times for my test section of road (uphill in Colorado on an on ramp to a 75mph speed limit sign.)Banks exhaust same results. More air in and more exhaust out= higher performance. I don’t even know why this is argued. Maybe the lack of quick cooling aluminum, funky designs, orientation of the air boxes , and tight bends of the CAI’s for the jk are too restrictive to show obvious results. Of course I think the straight 6 was a better engine, much more torquey, but that’s an opinion. 😂

Are there any problems with a CAI? I have a 2015 JK 2 door. Is it safe?

Just ordered a rough country air intake can’t wait since I recently tuned my jeep with the factory muffler delete 💪🏽😍

How hard was it to get to the bolts underneath the fender / wheel well?

Should i save up for a Volant or just get the Red Rock?

Hi Dex.. fits this system also for the Jeep Wrangler Rubicon 2.8 CRD 2013?

What front bumper is that? Thanks bro!

Im running a K&N CAI and there’s definitely been an improvement with throttle response

Thank you, I order my today.

What unit can I use on my jk in California?

Does it save a gas?

I running the K&N with a super chip throttle response is awesome .

Just got my first Wrangler 3 weeks ago ( 2012 JKU) and been watching a lot of videos to see where to start with to mods. Do the cold air intakes help a lot?

What’s the maintenance of that filter? Do you clean it or just replace it, like you do with a stock filter? Thanks for the video!

Would a mod like this void the factory warranty?

I run ingen cold air. Rock the slides

I was running the AFE cold air intake on my 2016 JKU, now need to find one for my 2021 JLU

Just be careful horsing around in the puddles with an 'open' cold air intake like that (not in a box with factory-like mini-snorkel) - You can easily suck in water and visit hydrolock central. I was running a similar Mopar intake, now I'm running a new engine :\

Is red rock and rough country the same? Sure looks like it.

do you have a sound deadening hardtop liner? If so, could you do a video on it? I'm trying to figure out if getting a boom mat sound deadener headliner is worth it

Adventure Dex, Thank you for the videos brotha. I've learned a lot and found a lot of accessories due to your videos. But wouldn't a snorkel be more ideal when it comes to pulling in cold air? Since that style of intake is still under the hood and has heat coming from the engine, I'd imagine the air would be somewhat hot still even after being filtered. Just a question/thought. If anyone else has more an example or detailed reason I'd greatly appreciate it. Thanks y'all.

and if you off road in wet conditions its a lot easier to mess up your engine . Seen a few i run with make the mistake and follow someone with stock intake and make the mistake and water gets sucked into the engin

Why the open filter and not covered

Nice job

I use a K&N for street use and when I go off road I Swap out to a paper Wix filter to trap the fine dirt that the K&N can't

Dex, I have the injen cold air intake you installed a couple years ago. I love that. What’s the difference between the two?

Do you live in the Bahamas adventuredex?

👍👍👍👍

Whoahhhh ! How did you get that clone of yourself !! Trip !!

Running a K and N filter on my 2011 jk rubicon!

You didn't place the gasket around hole where the pipe goes into the box. Also it looked like you didn't place sensor in right direction.

When did you get a new Jeep?

Why does that look like a scene from Jurassic Park? ;-)

Whose Jeep is this? I havent seen you show a red Jeep before.

Does that filter not need oil?

Ouch ! That kinda sounded like you crunched it !

You should do an oil catch can Video!!!

I'm currently running the Mopar cold air intake and I think it's not that great and heat shield for it poor design and it's tube it metal and creates more heat.

Hello,I am the manufancture of LED headlights and like your video. Would you be willing to test them? Please reply to me if interest.

Did I miss something? Where is the white Jeep? When did you get a red Jeep?

👌🏻👌🏻👌🏻😎

Is sahara considered a jl or jk?

Oops, forgot the clamp before attaching to throttle body the first time and had to refilm that, I see 😀

The sensor didn’t look to secure. Running a K&N

Hey friend Would you like to make a review video of JOYTUTUS Car Cover? l have emailed u the details. Please feel free to contact me.

New jeep?

Volant Cold Air intake.

Mopar cold air intake !!!

Wish you should how you secured the heat shield box

New Jeep? I always saw a white one...

I'm surprised that still TO THIS DAY people buy into the cold air intake MYTH . Because this EXACTLY what it is .... A MYTH. Anyone with a minimum of mechanical knowledge and a little common sense should know that this gimmick does ABSOLUTELY nothing to improve performance. Any modern vehicle where the fuel map / timing etc are managed by an ECU , it will adjust itself no matter how much more air you give it. CAI are money down the toilet.

For a video partially about sound, you sure used a crappy microphone for recording.

Now drive in some mud or cross a river see how well it works. Like its intended

Where is the white Jeep lol

I don't know how much, if any, it helps horsepower, and probably you don't either, but if you think it improves mileage then I have a bridge over the East River in New York you might want to invest in. Manufacturers are under enormous pressure to meet CAFE standards, and have spent billions of dollars optimizing fuel economy. If a plastic tube could improve fuel economy to any measurable extent, it would come standard.