Jeep Wrangler fender liners install. Hooke road liners.

Рет қаралды 19,503

3 жыл бұрын

A quick video of the installing of the fender liners for my Jeep.
It's easier to install if you take off the fenders first.
Note: only rubbing is wide left or right.
Please remember to subscribe to my channel, like and share.

Пікірлер: 19

@lewisCRAZ369 3 ай бұрын

2024 I just purchased some just like these without the white plate, thank you 🙏🏽

@MikeMike-qb3iz 2 жыл бұрын

I like your determination 💪

@michaelfelfe7260 2 жыл бұрын

Thanks. If i don't do it, it won't get done.

@richardthomas1531 3 жыл бұрын

Thank you, Nice Job.I ordered the same.glad to see how well they packed it.

@michaelfelfe7260 3 жыл бұрын

Glad I could help! Please remember to subscribe to my channel. Thanks for watching.

@corazondemelon9705 2 жыл бұрын

Great video! Heads up to anyone thinking of buying these: I ordered the full set (front and rear) for my JL- first they sent me front liners that were completely damaged and rusted. And now that I’m trying to install them, the rear liners are too big for the wheel well. Don’t waste your money on Hooke Road products

@michaelfelfe7260 2 жыл бұрын

Thanks for watching. I only did the front because i wanted some protection from road debris. Mine were sent in perfect condition. Please remember to subscribe to my channel.

@shawnshavali9291 2 жыл бұрын

Thank you!!

@michaelfelfe7260 2 жыл бұрын

Thank you! Please remember to subscribe.

@ross5307 2 жыл бұрын

I just attempted to install mine - same ones as you - and I feel I shouldnt have taken the entire fender off, just certain bolts. With that said, had the driver side fender liner on and noticed the difficulty I had getting the actually fender back on so I pulled it all off because I was burning too much daylight and just put the fender back on. Going out of town this weekend so I’m gonna attempt it again when I get back. At least now I have a general idea of what to and to not do, so it shouldn’t take me nearly as long to do both driver and passenger side. Anyway, thanks for the vid and I’ll post back when I get mine EDIT: BTW, I ran into the same issues you did so trust me, you are t the first and definitive not the last

@michaelfelfe7260 2 жыл бұрын

It's been over a year since i did it. I did have some trouble doing it. I seam to remember having to take the fender off too, as 1 or 2 of the bolts would not go in without doing it. It was a learning experience doing it. Do you have steel fenders too? As i did my fenders first, then added the liners. Best of luck. A little patience and you can do it! Please remember to subscribe. Thanks

@ross5307 2 жыл бұрын

@@michaelfelfe7260 yessir, I already subbed when I saw your video. I have the same fenders and same fender liners. Once I get back from my weekend out of town I’m gonna give it another go. It’s just so freaking hot in south Florida’s right now you can’t do anything until after 630pm. And then it’s a race against the clock. But I saw what I did wrong so I don’t think that it will be a problem, or at least it won’t take nearly as long to do both front fender liners as it did to just do one tonight, but I’m not trying to jinx myself. I’ll folllow up with you once I get mine on next week. Have a blessed evening my friend and thanks for the speedy response

@Celldestroid 3 жыл бұрын

1st liked . Thank you for the video

@michaelfelfe7260 3 жыл бұрын

Thanks for liking. Please remember to subscribe. Thanks

@RobertBrockwell Жыл бұрын

I'm having the same damn issues. What the hell is up with these things. Surely not all inner fenders are this damn difficult. Thx for the vid.

@RobertBrockwell Жыл бұрын

Those are the wrong ones brother. The ones you needed use the same holes as your old inner fender. You would've have the correct ones installed in 10 minutes.