Jeep Wrangler TJ - Evaporator Core and Heater Core Replacement **

Рет қаралды 3,733

3 ай бұрын

In this video I will show you the tips and tricks I used to replace both the Evaporator Core - amzn.to/3Jzq2WV and Heater Core - amzn.to/3QbvYJJ. This replacement is applicable to 1997 - 2006 Jeep Wrangler TJ models. In my opinion this repair wasn't near as bad as I thought it was going to be. Removal of the entire HVAC Box is required.
Parts and Tools used in the video -
Evaporator Core: amzn.to/3Jzq2WV
Heater Core: amzn.to/3QbvYJJ
A/C O-Ring Kit: amzn.to/3Upe3le
A/C Line Disconnect Tool: amzn.to/3U9Qifz
A/C Accumulator: amzn.to/3W8bC7Z
Hose Clamping Tool: amzn.to/3Qe287k
Spring Hose Clamp Tool: amzn.to/4b164jG
Hose Removal Tools: amzn.to/4aJ1SVZ
Torx Bit T27: amzn.to/3UbunV8
Dash/Trim Pry Tool: amzn.to/44geule
Rubberized Undercoating Spray: amzn.to/49QQlme
Warning: On vehicles equipped with air bags, disable the air bag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the battery (ground) cable, then wait two minutes for the air bag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the air bag system. failure to take the proper precautions could result in accidental air bag deployment and possible personal injury.
Auto Repair Source - www.FreeAutoMechanic.com/
Engine Cooling System - www.freeautomechanic.com/cool...
As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 19

@Sturges-ed8zh Ай бұрын

Followed step by step and probably saved thousands in shop labor. Thank you so much for making this video. I couldn’t have done it without it.

@natehutch8967 9 күн бұрын

Thank you so much brother. Made this job affordable and step by step.

@Sturges-ed8zh Ай бұрын

Thanks for making this. You saved me from thousands in shop costs.

@werdskrl 3 ай бұрын

This is one of the most comprehensive heater core replacement videos I have seen. Great work in covering the tips to look out for. Thank you for the video! Subbed!

@tsquared5132 2 ай бұрын

Great video. I’ve not done this before but did it with confidence after watching this. I didn’t pull my steering column and saved a bunch of time. Thanks for doing this.

@cicada784 2 ай бұрын

Extremely useful video, just followed it and all went well. For a while there thought that box wasn't going back together then all of a sudden the interior parts were aligned.

@d.j.d2442 2 ай бұрын

Thanks for doing this video. Came in handy for my LJ repairs. So far so good. The strap for the dash was effective for the core removal and install. Thanks again.

@jameshelton8095 3 ай бұрын

10:24 that tool is awesome! I would have had to mark all those connections so I didnt forget anything. Experience is sure worth a lot. Thank you for sharing

@FreeAutoMechanic 3 ай бұрын

It was well worth whatever I paid for it years ago.

@paulhughy3948 2 ай бұрын

Great vid Bro fix'n to do my jeep next week......just tore the dash out of my 2009 dodge ram and replaced the evaporator so im not so intimidated with the jeep, basically the same process .........Thk u for all the time u spent making the vid to help people out !!

@FreeAutoMechanic 2 ай бұрын

Should be a breeze compared to the ol' Dodge. Appreciate the kind words.

@richardvignola8000 2 ай бұрын

Nice job. Thanks for the video.

@FreeAutoMechanic 2 ай бұрын

Your Welcome!

@waden404 25 күн бұрын

OUTSTANDING VIDEO. Thnk u!!!

@FreeAutoMechanic 24 күн бұрын

Your Welcome!

@chriskerns329 2 ай бұрын

Thank you so much for the well made video ! I am a backyard mechanic who has a 2004 and 2005 TJ and your video gives me the courage to attempt it myself. Looks like it's a costly replacement that can be done since you have given everything that is needed to get it done ! Thanks so much for the methodical and detailed step by step instructions for for teaching this ! Your a true Jeeper and I appreciate the help very much !!

@FreeAutoMechanic 2 ай бұрын

Hey Thanks! It's positive feedback like yours that lets me know if I'm putting to much detail in the videos or not enough. Its nice to know it has been useful. I too was a bit intimidated before doing this job but found it really wasn't as bad as I thought. You can Do It!

@Sturges-ed8zh Ай бұрын

Followed step by step and probably saved thousands in shop labor. Thank you so much for making this video. I couldn’t have done it without it.

@FreeAutoMechanic Ай бұрын

That's Awesome!