Jeep Wrangler TJ Rugged Ridge HD Crossover Steering Conversion Kit (1997-2006 4.0L) Review & Install

No video

Jeep Wrangler TJ Rugged Ridge HD Crossover Steering Conversion Kit (1997-2006 4.0L) Review & Install

Рет қаралды 59,648

6 жыл бұрын

Shop This Rugged Ridge HD Crossover Steering Conversion Kit: terrain.jp/2vj...
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Replace the factory steering components on your Wrangler to prevent bent tie rods with this 1-1/4" steel Rugged Ridge Heavy Duty Crossover Steering Conversion Kit. This bolt-on steering conversion kit includes a damper and DOM tubing preventing failure. terrain.jp/2vj...
Item J114048
MPN# 18050.88
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
SUBSCRIBE at / extremeterrainvideos
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/...
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterr...

Пікірлер: 36

@extremeterrain 6 жыл бұрын

Shop This Rugged Ridge HD Crossover Steering Conversion Kit: terrain.jp/2vjOJQE Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

@OntarioFreshwaterFishing 3 жыл бұрын

I have this kit and it sucks. Tie rod ends blew apart within 5 months.

@andrewcarr899 5 жыл бұрын

What about the bump steer from the drag link being longer and not parallel to the track bar

@markblandford9346 4 жыл бұрын

You never answered Andrew Carr's question below, about bump steer due to the steering geometry getting way out of whack from this install. I'm having to deal with that now.

@theborg269x 2 жыл бұрын

Bump steer is caused by Trac bar angle as well. Might need a drop bracket or different Trac bar. Also anything over a 3 inch lift should have a longer pitman arm. To keep the drag link at proper angle as well

@chrisjan8 5 жыл бұрын

Amazing man ! you seriously know your stuff, keep it coming cause I'm learning from you! Thankx again big man

@yuriortiz50 2 жыл бұрын

I HAVE A 1998 WITH A "Y "STOCK stearing components MY QUESTION IS DO I HAVE TO DRILL/ USE A REAMER TO INSTALL THIS NEW ONES?? Please respond my jeep is stock

@compshee 5 жыл бұрын

looking to buy this asap, but what about clearance issues on 15x8 rims with 3.75 backspace? thanks, and great job

@joeyvargas5213 3 жыл бұрын

Hey what kind of pitman arm arm you running with that jeep and how much is it lifted?

@dylanreynolds4899 2 жыл бұрын

How do I know where to install the steering stabilizer bracket at on the drag link? How extended does the stabilizer need to be when the wheels are straight?

@christianarteaga8906 3 жыл бұрын

I have a question I have a 2003 Jeep Wrangler TJ is Liv 3 and .5 what did I need to change in the front

@TomColeman360 4 жыл бұрын

Why is this only listed for a 4.0? I have a 2.5 and the steering should be exactly the same, right?

@smittysgarage3698 4 жыл бұрын

Why is this kit only for a 4.0l wrangler?

@kswyg001 6 жыл бұрын

......that's the replacement for Ryan Huck? You know it's not April 1st.....right?

@BryanSpear 3 жыл бұрын

Will this work only on a 4.0?

@emmanuelreyescintron1300 6 жыл бұрын

Where can I find the wheels on that wrangler?

@wsmith9443 5 жыл бұрын

WIll this system fit my stock 2000 TJ ? If not can you steer me in the right direction to find the right one for me ? pun intended :oP

@CodyMacRae1 5 жыл бұрын

I'm 95% sure but figured I'd ask.. Would this fit my '00 XJ?

@andrewcarr899 5 жыл бұрын

Yes

@supreme7267 4 жыл бұрын

Yes but you have to use a reamer

@stephenlayne8689 11 ай бұрын

Whats the Torque on all the clamps?

@stephenlayne8689 11 ай бұрын

Did you ever figure it out I'm wondering that now

@extremeterrain 11 ай бұрын

Rugged Ridge recommends to torque clamps to 35 ft/lbs.

@mr.bluegrass9723 6 жыл бұрын

Will installing this unite eliminate the death wobble ? Great video.

@lelandeggleston1041 6 жыл бұрын

Change your trackbar first, its honestly 90% of all death wobbles.

@mr.bluegrass9723 6 жыл бұрын

das hasguns. ...thank you.for the advice will change that first .,

@mikethrapp 6 жыл бұрын

Control arms and trackbar. In my experience its control arm issues. I got a jeep the trackbar moves 1" back and forth but no Death wobble. Lol

@musquizg 7 ай бұрын

Don’t waste your money. The tie rods blow super easy so fragile. Didn’t even take it off-road and there obliterated my stock grand Cherokee steering held up so much better and didn’t have the terrible bump steer that this kit has , so much play in your steering

@98fishingfool 4 жыл бұрын

Can I run a dual steering stabilizer with this kit

@extremeterrain 4 жыл бұрын

As far as I know, this kit will not allow the use of a dual steering stabilizer. Also if you're having wobble issues, this kit alone has a good chance of solving your issues. Many times, wobble or steering shimmy comes from worn out tie-rod ends (which this kit replaces), ball joints, track bar bushings, control arm bushings, worn tie rod ends, etc. Just a heads up, I'd rather you *actually fix* your problem instead of buying a band-aid. 😁 -Zach

@98fishingfool 4 жыл бұрын

ExtremeTerrain.com my Jeep drive fine I’m just looking for a stiffer set up

@slappygilmore5040 4 жыл бұрын

will this fit with rims that have a 4" back spacing?

@extremeterrain 4 жыл бұрын

I looked on the manufacturer's site for you, and was not able to find any restrictions for different size/offset wheels. This kit should fit no problem with wheels that have 4 in. of backspacing. -Zach

@slappygilmore5040 4 жыл бұрын

thank u very much for all your help

@mikelewis1738 2 жыл бұрын

This system is absolute TRASH. Don't waste you're time nor money. Buy the Iron rock offroad HD otk kit with the 5/8 hardware and never worry about your steering ever again.