Finish the Yamaha before you forget how to put it back

You can't start something and not finish it might as well finish the WR

Finish the WR 250 first. Trust me its harder to start a project after you start another

This is the most entertained I've been by a series on youtube in a long time - take that for what it is. I recently split apart my first engine and learned how little I knew, this is inspiring to an aspiring diy guy. Thank you.

By far my favourite KZfaq channel!! Keep it up post as much as possible!

First: Maybe a big chunk of the gearhalf vent out through the case when it broke, and just some gears/smaller pieces stayed in the motor. Second: Of course you fix this bike before you starts tearing hear bike.

Finish off the WR250 then starts her project. One project at a time. 😁

Agree with others below, WR250 then camera girls bike! Thanks for uploading!

WR250 then camera girls bike let her get more practice with it before making it road legal then if she falls of won’t brake indicator or reg holder or anything like that

please keep working on the WR! your channel has taught me so much about motors i love the videos a lot thank you for the entertainment!

This channel has so much potential. Just keep buying broken stuff and fixing them. This channel will blow up.

WR250! :) - Glad you are posting again....always entertaining. never want the videos to end! Thanks

Keep on going, you've got me intrigued with this project.

Here’s how ya go about this. Finish the little WR cause we all like seeing good bikes brought back to life for people to enjoy again. Then sell it and use the proceeds to make her bike street legal. Or teach her how to ride the 250 since it’s a wide ratio bike and a 4 stroke and should pretty much be street legal! Bam 💥 two solutions!

Finish that bike! Freaking love this channel. Been subbed since 40k

Have to say something bro... what I enjoy about your videos is that you guys work as a team, your wife is supportive and you guys have fun while working together. Much respect to your wife and you bro. Always looking forward to your next videos! Respect 👍

“there it is, Cyclus propelus”

Keep going on the 250 I think camera girl needs more practice lol

Dude, your Wife/Girlfriend is super cool. I love how into it and supportive she is. She loves the whole process probably more than you do. She's a keeper!

Love how this channel just progresses from one project to the next.

I wish i knew as much about engines n carbs as this guy - very clever dude.

I love watching your videos, they’re so fun to watch!💕

The large chunk of gear must of escaped with the original damage. I'm amazed how well it survived with the bits of gear/aluminium inside. I expected the bore/piston to be badly worn, but it's not :-D.

I had to pause the video I was watching to come here and let you know the TE250 series is the best thing I've watched on KZfaq. Keep it up, I love this channel! Alright, back to the video!!!!

Ive been waiting for this! Work on the wr!!!!!

Do the motor rebuild sorry camera girl

Keep working on the WR! I discovered your channel a week ago and blasted through every video. I’ve been going through withdrawals. Thanks for the vid. Keep them coming.

Yeaah i do agree dude... finish something you have started!... makes life easier 😃👌 cant wait to see her finished!

Keep going on the WR, then make it camera girls bike. I bet she likes riding it better than her green machine.

Never clicked off a Steve1989MREInfo Video so fast

I love his sense of humor. Their a great Duo... definitely one of my favorite KZfaq channels and I'm not even a mechanic

My life: Dirtbikes, and Jennies garage. Love this channel so much

You do what makes you happy man! Whatever it is, we’re going to enjoy it!

absolutely love your channel man! Keep up the good work and PLZ post more!!

Pretty cool to have a channel that actually knows what they're doing with an engine!

Just seen this channel and watched nearly all the videos! Keep up the good work, finally some one who can actually fix stuff and makes it fun to watch

Tough choose you left us with. I'd say whatever is more achievable as of right now. So there is more content. Maybe get the stuff for the road legal but continue with this engine

WR250 Engine rebuild first would be great. Love the resurrection content.

Finish the WR, but in all honesty, I see you 2 working on motorcycles, I click, I watch, I am happy! So do what you feel like doing.

Good job of the teardown, I think making a street legal bike is the way forward for now, then a rebuild in slow time, after all, dedication behind the camera deserves reward.

You two as always making me smile.. Thanks from Mr Smiley 😄😄😄😄

Keep working on it, love watching this channel. Make longer videos please :)

You guys are cool and I really respect your craft and effort, there’s always someone to appreciate your work out there

JG, I thorogly enjoy the content the two of ya'll put. nothing like starting a day on 4.5 hrs of sleep with a cup of coffee and a new video.

Keep on the WR. Best videos on the whole of KZfaq!

Finish the wr250 before you forget where everything goes and im really inteested

U guys are the bomb seriously... so much fun to watch, so much real info and learning, a very fresh approach to a channel... keep up the good humour and laughs... and swt projects! U said it best, things don't go to you to die... long live the things others gave up on.....

What a great channel. Fun, interesting and amusing! Really a sweet spot between all the other channels alike. Keep it up! 👍

Finish it the WR250 first :) By the way I love the dynamic between you two, it's something special and I absolutely adore it =)

Cycleus propellus! Best Latin I’ve heard all day!!!

1:54 we know you got that impact😉 I love your continuing the flow of the channel.

Amazing! Your videos always keep me hooked. I’d love to see the WR rebuilt. Thanks for taking the time to do this.

Don’t run that replacement main bearing. It’s been sitting so lack of oil. And could be toast from when the crank blew. Use the other bearing but don’t pound it out, that will ruin it. You need to bake the case in an oven then it should fall right out. Best of luck!!

very nice vid now, for then next video... i can't decide, do whatever you feel like because it will make the video better

Refreshing video. Awesome stuff! Glad to have you back guys!

you can make a tool to hold flywheels from a old leatherbelt and a piece of wood. then it works like those clamps to release oilfilters. been using leatherbelt trick for like 28 years. works like a charm

"Tappy tap". Someone's been watching some AvE

Finish the WR. So far, it appears that for very little effort and just a little bit of time and money on gaskets, it could (hopefully) run quite nicely.

I’d say WR because I love seeing broken machines get brought back to life.

Seeing the clean cylinder was a pretty cool find on this! Hope inducing for for the rest of the project. Stick with this blue gal. It would be cool to see you change the crank bearing. Also pretty cool to see that the screen between the clutch half and gear half actually seemed to do its job effectivly. . .Looking forward to the electrical wizardry of the KX too. I actually went to go check one out cause of your last video. looks just as fun as as the KE100; much smaller top end which is cool to see how the modern 2stroke 100 looks compared to the older 2stroke 100.

Love this channel! More videos more often please.

How did you learn to work like that 🤗

Keep going, it'll be worth it. I rode one of these on an Enduro in the KwaZulu-Natal, Drakensberg mountains last year. One very capable old bike. Love your films guys.

Relationship goals! She cheers him on. She is encouraging and supportive even when shit keeps going wrong. Lol two happiest people I ever saw haha

I love this channel

WR rebuild while you're at it

You and your wife are adorable lol. I’m a KZfaqr too and you guys are very family friendly and I hope that content creating takes your two a long way. Bless up and keep going! 👍🏼

Love love love your uploads! Please carry on with the WR.

Awesome dude your amazing

Camera girl deserves a street legal bike... WR can wait.

Best videos to watch. Doesn't matter what you post, though I suggest you continue with the WR given that I'm emotionally invested in this motor now. It deserves life!

Really cool video my friend. I somehow wound up here after watching videos on bikes and thought this was intermission lol but I stuck through it because I enjoyed your expertise and chemistry with your companion :) Kudos

I bet the rest of the gear exited the case upon making that hole...

perhaps some of the shrapnel shot out through the case hole????????could be where it went???????

Those are stock cams and those small flakes were just from clutch wear, a new set of cases piston kit, kicker gear, itll run fine

Great video, interesting to watch this diagnosis. Let's continue the WR's motor. When you've made it down to splitting cases and swapping trans you're kinda committed. Also, it becomes even more interesting to see it get checked out, finding what is necessary to fix or replace and then reassembled with as few "DOH" moments as possible...hehe!

YES! MORE JENNIES GARAGE!!!!!

You should repair the bike because it has an FMF exhaust!!!! :)

I really miss your Shasta Trailer rebuild series. Everytime a video pops up from you I hope it is the Shasta project.

Keep up the great content! You inspire my channel more & more! Finish the WR & the camera girls bike next! Thanks for the consistency lately!

I vote for the WR, it didn’t seem to take you long to tear it down .

“Thanks for watching “ no thank you for being you, your awesome

You must use same pair of crankcases because they have been casted same time and there can be some differences between other crankcases.

even lawn mowers have a decompression lever on the camshaft ive seen a lot of them fail on tecumseh engines ,, its just a cheap spring loaded lever that works on centrifugal force ,, thanks for sharing some awesome videos !!!!!

I was told once you should finish one project before you start another. Did I listen. Hell no. But I try.

"Chunkage." I believe that was my nickname in middle school. Sigh.

The mad scientist can always do 6 things at once that is what makes him happy and not bored.

Yep. 250 for me. Let's see that motor back together and running as smooth as a cashmere cod piece.

Onward with the 250!! If you fix her bike to be street legal now you won't have a camera girl 🤔🤷🏾‍♂️

9:09 Confirmed - CameraGirl is Bike-Curious :)

why is this channel so...so...wholesome

I think this is the fastest I’ve ever seen someone take apart a engine

I always leave a like for you guys

Listening to camera girl saying "Rubber mallet" is such a turn on. 😄👍

I have the solution to the Yamaha vs camera girl dilemma!! Two videos a week! Concurrent projects. then some generators, corvettes, Ferrari’s, etc. You two are great. Always love your episodes.

you guys are amazing but you made us a promise to post once a week, you are slowly going back on that promise, so many of us wait and wait for your videos, i have been a fan from almost day one, i think in the end this is something you want to do or you don't, there might come the day that your fans might stop waiting on the occasional videos, us my thoughts.

🤙🏽

I liked every single comment here even my own your welcome

you guys are the best lol I love watching your videos, very informative too i've learned a lot about motorcycle repair just from binge watching most of your videos

I see the trail 90 in the back looking all majestic