Cool, but I don't feel I'm brave enough. But my little brother had more faith in me. Now he has cool transparent blue joycons. Damn, now I want transparent purple joycons. It took me one hour and 23 minutes to finish both joycons. I feel like I'm a good big sister, I didn't even know I could do this. Thanks for the video I couldn't do it without this good put together video. Everything came out fine.
@CYMainA.I6 жыл бұрын
Coffie star which tools do you use it?
@angelos91295 жыл бұрын
@@raphaelfakhri4395 piss off pervert
@raphaelfakhri43955 жыл бұрын
No u dumb
@iLiekLemonade5 жыл бұрын
@@raphaelfakhri4395 go back to playing minecraft
@chrisd9335 жыл бұрын
Will you do mine Dx
@RagdollWraith5 жыл бұрын
this is a trend that NEEDS to come back. clear stuff is always awesome.
@nickreyes36043 жыл бұрын
For sure
@muhammadrauf26003 жыл бұрын
@@nickreyes3604 but it will turn yellow
@charliepuppy.3 жыл бұрын
no it break
@sanjamjeetsingh74262 жыл бұрын
Nothing
@Ethan.YT.2 жыл бұрын
That's why I bought the Dbrand skins, I'm not going to break my phone
@Moofan4 жыл бұрын
Been meaning to type this for the longest, but I referred to this video SEVERAL times to do multiple switch case mods for customers who come into the retro game store that I work for, and I honestly want to thank you from the bottom of my heart for making this video. It's really easy to understand and very easy to follow. I've referred to this video since December of 2017. Few years late, but thanks man!! You're the bomb!!
@Chriselchingon233 жыл бұрын
How much do you charge for doing this mod
@robertlittrell80402 жыл бұрын
Viviana saez do you have any contact information I would like for you to do my switch I got the whole Chrome body kit and joy-con shells I tried it myself and I fucked up my left joycon
@kyliedicello14352 жыл бұрын
ggggg
@kyliedicello14352 жыл бұрын
stop
@wanderingdaze7018 Жыл бұрын
Wat city are you in?? I need mine done
@alsin70854 жыл бұрын
me: _watches this video_ wow, that looks super cool my switch: _feverishly sweats_
@aanavbaskota4264 жыл бұрын
[chuckles] i'm in danger
@ZeroDrizzy4 жыл бұрын
Not as easy as it looks
@sambridges71124 жыл бұрын
dead
@no_42594 жыл бұрын
I literally said “oh cool. If my joycons start to drift, might as well swap the shell once it’s open to replace the stick”. To this day, they are still not drifting.
@TheSilent0064 жыл бұрын
it was nice of nintendo to include so many screws in their construction at least
@miffydsi50635 жыл бұрын
13 minutes and no ads WHAT A MAN this is when you know this is a good guy Well during the vid only in the beginning there are ads
@XXently5 жыл бұрын
Miffydsi lol
@grunge-6164 жыл бұрын
He's pretty stupid thought. in his place I would have put some ads to win that extra profit lol
@marinagomes51684 жыл бұрын
@@grunge-616 i think he gets enough sponsorships and money without the adsense lol
@shadowcastyt4 жыл бұрын
theintense1 there’s nothing wrong with ads granted there are people that abuse the ads but it’s how a lot of these KZfaqrs make a living and feed there families
@xatoor4 жыл бұрын
@@theintense1986 haha look at him hes selfish for wanting to make money from his job
@mozzagamer1726 жыл бұрын
Who else remembers the good old days when nintendo made transparent consoles
@tichki5356 жыл бұрын
Mozza Gamer brih they were translucent not transparent
@alexmotts6 жыл бұрын
Its only a matrer of time before they do it again. Peope modding their shit are retarded
I still have my see through purple gameboy colour. Works fine too.
@DartzSoryu4 жыл бұрын
Just replaced my old blue/red shells with a brand new Green/Pink ones, your guide was extremelly usefull, now my hoycons look like new!! and only for 10 bucks! Thank you :D
@nicog_234 жыл бұрын
DartzSoryu hoycons?
@siradam59044 жыл бұрын
I have 2 "hoycons"
@TheFlumeUnplugged3 жыл бұрын
@@nicog_23 well did you know that the j and h on the keyboard are close to each other so he acidently clicked the other button instead
@nicog_233 жыл бұрын
The Flume Unplugged well did you know I was joking?
@theuselessboii97513 жыл бұрын
I hate *autocorrelation* (autocorrect)
@VotiveNutria4 жыл бұрын
"I did surgery on a nintendo switch."
@melodiclogic99044 жыл бұрын
VotiveNutria HE DID SURGERY ON A NINTENDO SWITCH
@drshamimmohammed6154 жыл бұрын
Plastic surgery
@PaoloProducktions4 жыл бұрын
Bro they did surgery on a Nintendo switch
@madide39784 жыл бұрын
RendezvousDart GD haha
@salt14784 жыл бұрын
VotiveNutria can you explain your profile picture and why so many people have it?
@LesVertsAlgerie6 жыл бұрын
I'm sure editing this video was a nightmare.
@wmbtv24616 жыл бұрын
RedsTech every video is a nightmare if you don't know editing.
@Obsidemon6 жыл бұрын
Right, but all those cuts are pretty damn cool and hard to pull off nicely as he did
@josephkreifelsii65966 жыл бұрын
He does voice over his videos. So I'm thinking it's not really too hard to just throw togeather a bunch of disassembly clips, compile them togeather and voice over.
@qwaccc6 жыл бұрын
What he meant was finding each part and making sure it corresponds to what he is saying
@Marc474R6 жыл бұрын
There is no reason why this would be a nightmare, unless you edit using mouse.
@haris62246 жыл бұрын
Clear Edition, ALL THE THINGS! ALL OF THEM.
@clickbaitcancer1206 жыл бұрын
No, you see, i dont like the clear versions because i like to think everything is ran by tiny magical gnomes that protect me from the monsters under my bed when i sleep.
@libra_v36 жыл бұрын
Clear edition ALL THE THINGS, EVEN THINGS WITH METAL
@moedekaiser6 жыл бұрын
Even clothes
@mevensc216 жыл бұрын
Clothes should be clear
@defaultmesh6 жыл бұрын
I mean... you can actually make an LCD screen transparent by stripping out the backlight and diffuser.
@MinecraftS3RDNA3 жыл бұрын
@4:47 The black spacer is a dust guard for the joycon sticks, very important to transfer over to prevent the sticks from drifting.
@Akashmash4 жыл бұрын
You're a real g for doing this with such brilliant filming, concise editing and dense amounts of detail. First attempt went perfectly with my atomic purple kit, looks great and I now have a d-pad on the left joycon! Even the shoulder buttons were super easy. If you're thinking about doing this to your switch and you're on the fence, I would definitely attempt this with the aid of this video. If you're not too experienced with repairing or modifying electronics, just take your time and work slowly with the video after watching it through a couple times. Good luck!
@Sharealdragon6 жыл бұрын
The one thing, you didn't know what it was, is the Amiibo reader. Probably a simple NFC connector :)
@roseroseroserose5 жыл бұрын
yeah it is
@NabiKazemi5 жыл бұрын
You speak very fast and don't waste our time. You're a good man. Thank you ❤️👍
@introvertedwifi48184 жыл бұрын
We need something like this to be official, I always loved the look of translucent technology.
@DarkLegendOW4 жыл бұрын
"Remember that spring you weren't supposed to lose" Me: wait what spring?
@2KidsNAWife3 жыл бұрын
😂
@unknownwolf40463 жыл бұрын
@@2KidsNAWife I have a Yellow Nintendo switch lite does hurt my eyes a little gotta get use to it 😊
@AOC10995 жыл бұрын
[ Insert joycon drift joke here ]
@MannyFreshhh235 жыл бұрын
Swag Trooper I am just buying it pre made so if it breaks I’ll return it
@Ikramabukar5 жыл бұрын
Or you can always buy a replacement joystick off amazon and switch it out for the drifting joystick
@ivebeenmemed5 жыл бұрын
drifts at a level 6 with farther drift at a level 7
@no_42595 жыл бұрын
Free mini boosts in Mario Kart
@dawson609014 жыл бұрын
Swag Trooper lmao
@therealestcocorb15186 жыл бұрын
He literally switched the switch........
@jlinkpro5 жыл бұрын
Lol
@Mr-Flexy4205 жыл бұрын
TheRealestcocorb 1 -.-
@user-px7yf3se9d5 жыл бұрын
Lol
@avocado29305 жыл бұрын
666 likes
@Makochips4 жыл бұрын
guess you can say... He *switched* thing up! ok I'm leaving
@zubzero3040505 жыл бұрын
When your just watching it feels so slow but when your working along it feels like Zack is going way to fast XD
@seasafedomo4 жыл бұрын
Lol he said 90 minutes, it took me 240
@willhamilton2974 жыл бұрын
I did this in the same order, making sure to watch every step and to do them in order, starting with the left joycon. It functioned great, and it looks fantastic. PLEASE DO THAT FOR THE RIGHT JOYCON AS WELL! I ended up making the mistake of thinking that this was going to be the same kind of stuff, and it is to an extent, but it’s also got a few more parts and is more complex than the left one. And when you’re working in tight spaces, EVERYTHING has to be lined up just right or you might crush something or accidentally let something loose, and that’s exactly what I did. It can no longer connects to my switch, and because I wasn’t thinking I fully screwed the back panel onto the rest of the controller and the screws stripped so I can no longer open it to fix my mistakes, if they even can be fixed. With that, I now have to go back and get a new right joycon for $50 and get the clear joycon casings for another $20 and with tax and shipping that’s almost $88 to redo this. Make sure to set aside maybe 2-3 hours, and be really sure EVERYTHING is perfect before you fully close everything up. (Also, make sure that what you’re popping off the LZ and RZ triggers that you’re keeping your thumb over them as you’re removing them. It’s EXTREMELY hard to do, but it’s worth it. When I did it they flew away and I only found one of them. It still works perfectly fine with only one spring surprisingly, but it’s probably best to have them both inside the system as intended, you know? I also lost a couple screws, but luckily the clear shells I bought cane with some screws, but be careful! These screws are sometimes too long for certain holes, but all you need to do is get a basic pair of pliers with nippers on them and just carefully cut the tips off of them to get them the right size.) Hope all of this helped! UPDATE: I was able to open up the controller again by very carefully sanding down the tip of my Y shaped screwdriver and was able to open up all the screws. After that, I was able to instantly able to find my problem. The ribbon cable that connects the actual joycon to the tablet was slightly askew. I relieved the pressure and then pushed it all the way in, and tested it, and it worked perfectly. I was so happy to save that money. I ended up replacing the small Y shaped screws with small X shaped screws that came with the clear shells on both controllers and now it’s perfectly fine. I can open them up again with no problems if the problem ever comes back. Again, I hope this all helped. After all, I’d like to see this if I was doing this project.
@eloska5894 жыл бұрын
Wow that's why my dad said I can't but this because I would end up messing something up
@willhamilton2974 жыл бұрын
Zorra Smith It’s not too hard as long as you’re careful. Just set aside the right amount of time and keep track of things.
@MarioHernandez-zx9tc4 жыл бұрын
I have a problem also .my right joy con wont charge and it connects to my switch here and there can someone give me advices ? To how i can fix the problem ?
@willhamilton2974 жыл бұрын
Mario Hernandez Re open the right joy con and check the connection of every ribbon cable. My issue was similar to this one, and it was because my cable wasn’t fully pushed in all the way. It’s scary because you don’t want to force it in so hard it causes damage to the joy con, but you want to not make it so lose it won’t even connect. But yes, re open it, make ABSOLUTELY sure every cable is fully pushed in and closed down properly, and don’t screw the two halves together fully until you do a test making sure everything is working properly again. Hope this helped, good luck!
@MarioHernandez-zx9tc4 жыл бұрын
Ok thank you ill try that .but heres another thing just happened i connected a usb charger to the switch to see if my right joy con was charging .and when i took out the charger the right joy con was working fine .but when i took it off the switch it didnt work no more .so i tired charging it aging with the usb charger and it started working again .still think its the ribbon cables ? .but ill try doing what you said and give you and update .👍
@dliciouscrabmeat63555 жыл бұрын
maybe this is a project for after the warranty expires....
@kyleharmon23095 жыл бұрын
If I dropped it and it broke I'd definitely go get a new one that day, but I agree with you here. It's the only thing stopping me from that atomic purple
@dankarino5 жыл бұрын
Or since there appears to be no form of warranty void stickers, after your switch dies in its clear state. Simply transfer it back to its old housing.
@dliciouscrabmeat63555 жыл бұрын
@@dankarino they see the scratches on the screws.
@dankarino5 жыл бұрын
@@dliciouscrabmeat6355 buy new screws lmao or don't scuff the screws
@600159mer5 жыл бұрын
Not sure which country you're from, but in the US, the warranty is fine so long as you don't modify the hardware, and have the original casings when sending it in for warranty. Simply changing the casing DOES NOT void the warranty.
@mupparna06 жыл бұрын
Next video, "I have made my skin completely clear"
@ericbazinga6 жыл бұрын
.Klaebu .Klaebu That would actually be pretty fascinating
@dineshreddy52236 жыл бұрын
.Klaebu .Klaebu ZACH clear edition.😀😀😀😀😀
@Y_52506 жыл бұрын
Imagine the bald head!
@Jdawg331986 жыл бұрын
Oh god, it will be like Bionic Barry from Archer, but more fleshy…
@blancZee6 жыл бұрын
It already is
@a333leal4 жыл бұрын
I’ve never ever done anything with circuitry or electronics, but no joke, because of this amazingly detailed tutorial video, I changed the shell/skin on my switch, to a chameleon purple green and it looks amazing!!! Thanks Jerry!
@Arestephes Жыл бұрын
As a repair tech, this is my all time favourite video. Thank you. I also believe that antenna in the right joycon is for the NFC reader
@Michael187515 жыл бұрын
I did it... No regrets
@persoonophetweb28915 жыл бұрын
Michael18751 great job i cant bring myself to do it
@Noah-hx9oi4 жыл бұрын
Thanks for that I'm now thinking to myself. If a guy with a Minecraft profile picture and is called Michael18751 can do it I can =)
@mytrannguyen35514 жыл бұрын
Well done
@Noah-hx9oi4 жыл бұрын
@Alp Gürek I couldn't do it anyway. The screwdriver that came with the product stripped my screws.
@Noah-hx9oi4 жыл бұрын
@Alp Gürek It's fine. I also spent around £30 on stuff to fix the stripped screws like other screwdrivers. At least with the other screwdrivers I was able to mod my PS4 controller.
@febe93406 жыл бұрын
The square thing in the right joycon is the NFC for amiibos
@teasp00ns Жыл бұрын
I’m not very electronically-inclined, but I re-shelled some joycons using a different tutorial. Watching this after the fact, I really appreciate the context that you give to explain what various parts are for! It really helps a newbie like me make sense of a lot of bits and pieces I’ve never seen before. The black padding around the joystick that you faithfully moved without being sure what it was for - it’s a dust guard :)
@MrMikeGallardo4 жыл бұрын
Thanks man! Me and my wife switch out to a purple clear case. Worked on it during the covid-19 lockdown. It was a great 3 hours to focus on something other then the news and what not.
@letsgetwes26645 жыл бұрын
6:35 “I’ll Gently Take Out That Battery” *CRACK!!!* lol 😂
@marukocore5 жыл бұрын
LMAO! 🤣
@KingPandeh5 жыл бұрын
*h-huh?*
@antoniogomezlopez68936 жыл бұрын
Your hair is clean edition too
@harryo.41356 жыл бұрын
Antonio gomez lopez 😂
@M1kxx5 жыл бұрын
Yoooooo
@whatever40535 жыл бұрын
Clear *
@LongTimeAgoNL Жыл бұрын
You have saved my day. I bought the ExtremeRate transparant shell for the Switch, but their own manuals are not good. They dont show the things you need to take in to account, most videos are without voice. It's bad. But yours... YOURS SAVED ME. Thank you so much! Even 5 years later, this video still holds up. My wife her switch now looks simply stunning. Just like my Game Boy Advance back in the day with the see-through shell did as well. Thank you JRE.
@iantheorem5 жыл бұрын
Mr. Clean lol I get irritated with walkthrough DIY repairs and tear downs because people aren’t thorough enough and their errors and fumbliness just make their videos hard to stomach, yours are very good. Very good. Thank you.
@Winlonghorn_iso5 жыл бұрын
8:22 I am pretty sure that Is the NFC reader for using amiibo
@jorge92835 жыл бұрын
Yah
@shadow_kitzune5 жыл бұрын
No, that's inside the joystick
@Winlonghorn_iso5 жыл бұрын
Shadow_Kitzune SJ well I was thinking it was in the joycon and you just tapped it on the joy stick
@TurningKhan5 жыл бұрын
@@shadow_kitzune it is the nfc anthena, it goes around the joystic wich is why you tap the amiibos on it.
@TurningKhan5 жыл бұрын
@Draconial _ the nfc reader is a very slim copper wire that goes all around the joystick; that is why we tap the amiibos on it.
@judithlyle50956 жыл бұрын
I've never felt so much anxiety watching a video
@bossmansal676 жыл бұрын
Judith Lyle pussy
@artbygabe5 жыл бұрын
Then you need to watch a video on opening up an Apple watch. 😜
@blingblinginyaface5 жыл бұрын
god dam pussy
@aidensalcedo65384 жыл бұрын
Jerryrigeverything: it’s fairly simple if you know how to use a screwdriver. Also jerryrigeverything: carful with the ribbon wires and pull these wires out of the motherboard
@Fidodo3 жыл бұрын
Thank you so much for this guide! The instructions were incredibly clear and the camera angles, zoom ins, and clear shells helped me see exactly what was going on with these incredibly tiny parts. I've looked at probably half a dozen other videos and this one blows them all out of the water! I've wanted all purple joy cons for years and now my dream has come true! Next time I need to take something apart I'm checking your channel first!
@Schonken226 жыл бұрын
The instructions are CLEAR 😂 Nice Video as usual btw 😊
@isaactuscano74706 жыл бұрын
In future: clear crystal fully functional Zack. Waiting for that video
@batmanscousin4 жыл бұрын
me replying three years later: thank you for being so thorough. this is sick
@mightyPants4 жыл бұрын
I don't even have a switch, but this guy somehow manages to speak quickly and clearly while having a soothing voice at the same time.
@aryangupta48786 жыл бұрын
It was so satisfying to watch this video.
@redwario82246 жыл бұрын
Aryan Gupta no it wasn't it was stressful
@jeffreylewis68136 жыл бұрын
its his soft gentle voice
@cruisefromdallas6 жыл бұрын
I love you how to not want down at your tango Switch because my neck hurts me every five seconds I'll download it it's like I can't even play
@luzcastillo11966 жыл бұрын
SmashyPlays watch ur profanity
@yumiko5796 жыл бұрын
This is my *favorite* youtuber, been watching him for along time now and i allways watch from start to finish. ( i think he would enjoy a quality clear set of tools he can work with including a heat gun )
@xxblackgeishaxx2 жыл бұрын
Succeeded my first time swapping shells thanks to this video. I started with the left. I did not have a plastic tool to pry the battery off, so I tried to use a screw driver, the battery plug did a small little spark and the joycon died 😂😂. I went ahead and carried on so I could learn. At least I would have a better chance with the right with my knowledge. To my surprise, after putting the left joycon back together, it was perfectly fine and powered back up once connected to my switch. I learned that I did not need to disconnect a lot of stuff. On the right joycon, I only unhooked the joystick ribbon and the ribbon connecting from the RZ button to the board and then i took everything else out fully attached (the battery, rumble motor, antenna, amibo reader, etc.) it took me almost 3 hours on the left and about 20 minutes on the right. Shortcuts are great if you’re wreck less like me, but everything came out fine 😂😂 lol. If able to disconnect the battery, go for it, but everything else like the motor, antenna, amibo reader, or the plates that allow the joycon to connect to the switch don’t really need to be fully disconnected.
@javafloof4 жыл бұрын
If switch made a limited clear switch for halloween and named it “Ghost Switch” that would be really cool
@CantiBun4 жыл бұрын
The limited-edition King Boo switch
@davdavvv21854 жыл бұрын
LoL
@Lutzy4 жыл бұрын
If Nintendo*
@AFlyingSwive4 жыл бұрын
@@CantiBun with a little crown that can clip on top
@deadname5693 жыл бұрын
And with a switch lite
@epikwhale52125 жыл бұрын
My mom: why this device is broken?
@depopa10335 жыл бұрын
why my son not talk england is?
@Papercleeep5 жыл бұрын
@@depopa1033 bruh lol
@wyvernsden33855 жыл бұрын
@@depopa1033 r/ihadastroke
@MrJerppu5 жыл бұрын
@@wyvernsden3385 R/ihavereddit AND also Its a joke so R/woooosh
@lordinvispy5 жыл бұрын
I wanted to look cool
@khalidmohammed25095 жыл бұрын
I am proud of you for it keeping it alive 0:01
@kaylawilson42074 жыл бұрын
I just finished my fist switch case mod, I went with atomic purple, and I did it all from watching this video. Thank you for showing all the screws and pieces up close making it really easy to pause and for speaking so clearly.
@bonesrangel83274 жыл бұрын
Mission success. The timing was pretty funny I got my switch and a couple games the day before everything started closing down. Then i got the case in the mail a few days later. Perfect project for quarantine. I watched this video before even having a switch because I was so excited at the idea of having one and then doing this. Thanks for the tutorial.
@hex58525 жыл бұрын
You’re like Agent 47’s calm, friendly-looking brother (particularly the Hitman 2 rendition). Awesome video!
@sandrogiuliano49195 жыл бұрын
I literally just watched this video and at the end he says “whether you’re watching this a day or one year from now” he knows me so well
@VegitoBlackityBlack5 жыл бұрын
Same dude. Same.
@emilyp844 жыл бұрын
Just did this using this tutorial! Everything works and it looks great! I used a see through purple case! In total, it took me about 3.5 hours but I spread it across 3 days doing the console itself first, then the left joycon and finally the right. It is tedious and difficult at times, but definitely worth your time! Definitely get a good toolkit; tweezers will be your best friend! Take your time, and it is definitely possible to do. Thanks JerryRigEverything for the great tutorial!!
@jojosbread_owo5 жыл бұрын
8:20 im pretty sure that's the NFC reader for Amiibos.
@unixity_WasTaken4 жыл бұрын
Ya
@blew3193 жыл бұрын
Hopefully he knows this now.
@abhijeetgupto6 жыл бұрын
What if you make a human clear edition, that would be amazing to see how our body works .
@princeroger06736 жыл бұрын
Abhijeet Gupta just learn biology
@davidleeashkenazi89926 жыл бұрын
Abhijeet Gupta no, that's disgusting.
@tsuyuasui72976 жыл бұрын
there is a mutant like that in x men
@AmatsunoYami6 жыл бұрын
Yes please make a clear human next
@pimpchimpin67856 жыл бұрын
Wouldn’t sun rays just burn some sensitive parts?
@plumyster40626 жыл бұрын
The weird thing in the right joycon is the NFC reader
@calugaru41746 жыл бұрын
Plumyster and the gyroscope probably
@BolbiiS6 жыл бұрын
Călugăru Gropiță the gyroscope is in both, so thats not it. Probably just the NFC reader
@ray-kast6 жыл бұрын
Yeah, gyroscopes are pretty small.
@thegreatpickle15484 жыл бұрын
Me:Ooooh thats so cool! I'm gonna buy it! My switch: *Why do I hear Boss Music?*
@deadname5693 жыл бұрын
Your switch:aw shit here we go again
@NyaMoon_4 жыл бұрын
Thank you! I did it today :) started with the back then left them right joycon! Took me about 3 hours and everything still works :D had no experience with stuff like this
@nuff88465 жыл бұрын
I've owned my Switch for less than two weeks and wanna say thank you for making me feel informed and knowledgeable enough to do this next payday. You're a real hero.
@jeetsharma63266 жыл бұрын
Can you make a video about how to organize the screws when we wanna do any projects of our own?
@ersyadiaz6 жыл бұрын
just buy a magnetic pads/mats for screws, it already has grids printed on it to help you organize
@lumirogen44326 жыл бұрын
Jeet Sharma I'd probably recommend a tackle box
@MikeVanDalen19966 жыл бұрын
I recommend an ice cube tray, it works like a charm :P
@Tietelik6 жыл бұрын
10:58 He just Throws them around xD
@viharcontractor16796 жыл бұрын
Ersyad Adhimakayasa Not all screws are attracted to magnets though.
@n0anime3424 жыл бұрын
I’ve seen a lot of people pull the guts of the joy cons out as one piece. It saves time and stops the hassle of putting something in wrong
@AjEstradafun4 жыл бұрын
The ZR and and ZL buttons/ribbon cable are the bane of my existence. Broke both of them but everything else was perfect
@mohammadissa99586 жыл бұрын
who watched this video without even owning a switch?
@tsuyuasui72976 жыл бұрын
Mohammad Issa me getting mine wednesday tho i wanted to buy at launch but people said to me it was better if i waited and it wasn’t for nothing lol bc allot of people had problems with a dyschinking (dont know how to spell that) and the dock scratching the switch but now nintendo has put pads inside docks
@Cz32gamelot6 жыл бұрын
tsuyu asui dang bro all he said was who watched this without owning a switch 😂 but me to getting the mario odyssey bundle
@ei..6 жыл бұрын
Im probably going to buy one in the next month or so. Right now i'm on a switch youtube videos marathon, just like when the switch was launched! xD
@tsuyuasui72976 жыл бұрын
Cz i commented to the wrong comment lol i wanted to comment to someone else comment who said thats why i never buy consoles at launch and do you already own a switch or is the odyssey bundle your first switch
@Cz32gamelot6 жыл бұрын
tsuyu asui lol the mario odyssey bundle will be my first switch
@zaori27855 жыл бұрын
whoever does this with working switch afterwards deserves a medal.
@sakurito554 жыл бұрын
Zaori it’s actually pretty easy, I did it in like 40 minutes a year ago, now I came back cause I want to give my sister a pink switch for Christmas or maybe for New Years
@chrisresendiz71724 жыл бұрын
Let’s go my first achievement
@melodiclogic99044 жыл бұрын
Alabaster1223 that sucks, rip playing Splatoon 2... it’s so annoying that you can’t remap the controls in games like that, maybe someone should make a mod for that. The things we have to do for beauty
@masterfry41874 жыл бұрын
Wheres my medal
@yeowboonteo4 жыл бұрын
.
@VanlifeReality4 жыл бұрын
His voice is the best sound to relax and fall asleep to
@lavvender4 жыл бұрын
This video was perfect and it helped me get my joycons replaced within a bit over an hour on my first try. A few recommendations for people: -take your time! Better to have a joycon that works even if it takes hours than to rush through it and break all the delicate wires -I recommend you buy a separate set of tools even if the shells you buy come with them. Usually the ones that come with the shells are cheap and I promise you'll strip the screws. Also sets come with tweezers and prying tools that will make all this so much easier -remember that the ribbon cables have locks on all of them!! Don't try to yank or shove any wires without checking the switches first. And when putting the wires back make sure to relock everything so it's secure -like was said in the video, keep track of all your screws because God are they tiny and easy to lose. Hopefully the shells you purchase will have spares like mine did, but it's best to use the originals if you can -I know I already said to take your time but I'm serious. ESPECIALLY on the right joycon. The ribbon wires are at awkward positions and it's easy to pull to hard and rip one. Learned this the hard way when trying to put back the zr ribbon wire. Ripped it and now I gotta get a new one. My fault, of course. Every other button works perfectly fine -don't try to pull anything out if it's not budging. You will break something and regret it. -follow the video exactly and you should be just fine Other than that feel free to ask me anything. It's my first time doing anything like this but maybe I can answer some simple questions
@barryn35006 жыл бұрын
God damn it Zack. You did it again!!
@Sithhy6 жыл бұрын
Zack not Jerry
@barryn35006 жыл бұрын
Sithhy shit man. i knew it wasnt jerrry. didnt sound right but put it down anyway
@M4TTYN6 жыл бұрын
didn't do much all really was a how to install the shell
@rubenmendoza57625 жыл бұрын
Just followed your tutorial and replaced my Shell. It took me approximately 3 hours to complete with zero issues. Thanks a lot!
@ikatulo_yt4 жыл бұрын
This dude whistles whenever he makes an "S" sound and I kinda love it
@nexusqx4862 Жыл бұрын
This video is gold still in 2023. Thnx so much. No better feeling than putting it together nd everything work perfect first try
@missghoulina5 жыл бұрын
Thank you for making this video, I just used it to change the shell on my joy-cons and switch! You explained everything perfectly and though it was time-consuming everything still works perfect on my switch!
@NintendudeTheRetard6 жыл бұрын
Not as clear as your haircut.
@Zylix083 жыл бұрын
All Ghosts are cleared in the switch, good job.
@o.lawrence24974 жыл бұрын
This video was GREEEAT! Slow and detailed enough to work on and he got all the right angles to show how it should be done. Thanks man
@jadduck5 жыл бұрын
when you completely switch a joycon and put it back together then realise you forgot to reconnect the joystick to the motherboard...
@votexgamer93785 жыл бұрын
Fuck
@lordinvispy5 жыл бұрын
Fuck
@ooka77055 жыл бұрын
Fuck
@jadduck5 жыл бұрын
Fuck
@ocea32375 жыл бұрын
I did the same thing but with the keyboard of an laptop
@MeesenMan5 жыл бұрын
Many of yall will come across a problem with the right joy con not fitting right. The problem is caused by a piece of plastic being too thick on the button side of the joycon case. It's located closest to the plus button where the rail fits in. I'm surprised Zach didn't run into the problem himself. To fix: use either a razor blade or tweezers to remove the excess plastic from the lip. It's tedious, but once you scrape off enough plastic it should fit like a glove!!
@gamingatom88745 жыл бұрын
You are the one guy saying this. No one else had this problem. How do we know that scraping away at that bit won`t break it?
@MeesenMan5 жыл бұрын
@@gamingatom8874 ive had this problem with both my clear white right joycons. I had no idea what the problem was until I saw another video of a guy explaining what it was and how to fix it. I'll link it in my next reply
@gamingatom88745 жыл бұрын
@@MeesenMan thanks.
@Treggy34 жыл бұрын
@@MeesenMan link pleaseee
@julianburrell50584 жыл бұрын
Finally gave my Switch the Jungle Green treatment and this video was what got me through it. So thank you! The one thing I'd recommend that wasn't mentioned: pulling out the trigger buttons is easier if you use your finger nail to push down the plastic casing while pulling back on the button at an angle. A firm but measured tug will do the trick.
@RywokastDarkstar50004 жыл бұрын
all devices should come with a clear option, looks so great.. they used to always do this with electronics when i was a kid.. looks so cool
@thebossinator98876 жыл бұрын
I think the thing in the R joycon that you said is probably a antenna, is a NFC scanner for amiibo
@Pixelman5466 жыл бұрын
It is an antenna, my right joycon will not sync to the switch without it
@thebossinator98876 жыл бұрын
Pixelman546 then why doesn’t the left have one. Only the right joycon has a nfc scanner
@Pixelman5466 жыл бұрын
TheBossinator the left has it built into the pcb. It is likely that this is the reason for left joycon disconnects because external antennas are more reliable than internal ones.
@neaksy68246 жыл бұрын
It is the amiibo reader!
@Pixelman5466 жыл бұрын
Whatever you say, take yours apart and try it out! I know that mine is an antenna, maybe yours is special and reads amiibos instead! You never know.
@marvinelaurza2906 жыл бұрын
who else just watched this whole video but didn't do it?
@tentifr6 жыл бұрын
Marvin Elaurza me...?
@cyclops82386 жыл бұрын
Me. Also he kinda reminds me of Mr Clean ☺love his videos.
@Splitface28116 жыл бұрын
Marvin Elaurza I did. I also have no intention of ever doing it as I don't own a switch. Clear electronics are just cool.
@Splitface28116 жыл бұрын
Marvin Elaurza I did. I also have no intention of ever doing it as I don't own a switch. Clear electronics are just cool.
@alika36516 жыл бұрын
If Zack uploads a video in whatever tech-topic, I watch it
@StroudWorshipTeam4 жыл бұрын
A good tip for the springs on the triggers, you can leave the springs out, attach the button, then put the springs in place. It makes it much easier.
@r_q5227 Жыл бұрын
Good to know, thanks
@cr7frvr4 жыл бұрын
Jerry during the video: "extra super easy" My brain during the video:🤯🤯🤯
@mithikx6 жыл бұрын
I'm seeing why the Joy Cons cost like 80 bucks a pair... Been really tempted to re-shell my Switch to transparent purple to mimic the atomic purple GameBoy Color with a matching PS4 controller in lieu of the Switch Pro controller. Seeing this in depth guide really helps, makes it seem a bit less daunting since I know what to expect, doesn't make me love those little ZIF connectors though. EDIT: Went through with the swap, found one that had a d-pad for the left Joy-Con so I got that version. Had to redo some of the ribbon cables a few time since I didn't secure them or they fell loose during reassembly, so like the video says check the cables. The right Joy-Con housing isn't a perfect fit (on the one I bought, I think they're all from the same molds though). The thing closes up but you can tell it doesn't close up all the way and bulges out a bit in the front, I heard other people having this issue and some filing can help with it, but I'll save that for another time as the right Joy-Con is rather annoying to put back together. All in all I would not recommend this swap for someone who isn't comfortable with working on compact electronics like the Joy-Cons and for those people to pay someone to do it or to find a service that can swap the shell housings.
@henriqueduarte51395 жыл бұрын
I had the same issue with the right joy con. The black piece with the SL and SR buttons wouldnt fit in the groove of the top cover near the + button. Did you figure it out? Or Jerry, did you have this issue yourself? Thanks!
@JosephEMercado5 жыл бұрын
Henrique Duarte I had it too. I took it apart and redid it to no avail. Have no idea what the issue is. All I can guess is it’s the mold itself.
@diamante4life015 жыл бұрын
It's the middle plate... If you plop in the original middle I guess it's the battery holder then it will fit just fine but it will look a lot less transparent
@NoGuLt5 жыл бұрын
First I lost a spring then broke a locking mechanism for the one of the ribbons. It was a long and aggravating path just to spend 70 bucks lol
@noxious_hamster6 жыл бұрын
Why am I watching this? I dont even own a switch...
@neilhaggerty61956 жыл бұрын
It's ok. It's just like how i'm waiting for a plug-in disc player so I can play BOTW on the switch with a Wii-U disc. Or a Tv remote app like the Wii-U's Tv button. Missed opportunities...
@Kareem_Ahmed176 жыл бұрын
i'm saving money for a switch. tbh you should try that, but since i started no too long ago i only saved about 23$ (sigh) i've got a long road to go :(
@gabrieltdu57806 жыл бұрын
ᎠᎪᏒᏦ Ꮮ☢ᏒᎠ ikr not my proudest fap
@dliciouscrabmeat63555 жыл бұрын
@@neilhaggerty6195 with the switch homebrew scene growing more and more, that doesnt sound impossible. considering i can play the wii-u version of BOTW on my pc in 1440P at 90 fps with a ps4 controller.
@deltabreak96245 жыл бұрын
@@Kareem_Ahmed17 I am saving too I have 180$ still more then half to go
@gmznlr4 жыл бұрын
This is the best teardown and making-up video of your channel!
@walmart5604 жыл бұрын
i don't even have a switch yet, or plan on doing this, this is just asmr to me
@angelaallenthebih16536 жыл бұрын
Oh I was wondering what happened to Mr. Clean
@GRCanalYT5 жыл бұрын
He was fired for being very bald.
@GamingAligator5 жыл бұрын
Wheezing rn
@melaniebaby3155 жыл бұрын
BAHAHAHA
@jamie_20765 жыл бұрын
I am obsessed with this vid because im getting a switch next month (ik im late) and im excited but im never gonna do it 😂
@jamie_20765 жыл бұрын
Unknown Atkinson yes i am but thanks anyway!
@nusaybahansar92855 жыл бұрын
@@jamie_2076 Do you have it yet? Mine comes in the mail tomorrow.
@jamie_20765 жыл бұрын
yep i did today!
@overlordiiv64635 жыл бұрын
Should have waited a bit cuz I think Nintendo will release a new model soon probably better quality than the previous
@nusaybahansar92855 жыл бұрын
@@overlordiiv6463 Yeah but it'll definitely be pricier...
@MiguelHernandez-sm7tc4 жыл бұрын
Hi Jerry, I just wanted to stop but and thank you for this amazing, step by step, tutorial! You explained it so extremely well and detailed! I have the same exact joycons you used for this tutorial! Honestly I never thought I’d be able to do something as complex as this but since the quarantine and me having a lot of free time, I decided to go for it! And honestly I did!! Thanks to your tutorial on the joycon replacements! Thank you so much! My Nintendo Switch looks so cool and retro!!!
@lethe.archive3 жыл бұрын
i’ve reshelled my switch twice and I always go back to this video to refresh! awesome guide!
@JackLe11276 жыл бұрын
8:20 Amiibo reader?
@MHBGT6 жыл бұрын
Yes! NFC.
@soapdish19856 жыл бұрын
Indeed it is the NFC reader.
@karwan63856 жыл бұрын
MHBGT NFC reader, same found on cellphones and other things including Wii U & New Nintendo 3DS!
@gaiuschapman29516 жыл бұрын
I don't think it is an amibo reader because it is not connected to anything
@Catalyst3136 жыл бұрын
Roy Foerster hOLY SHIT XD
@brittanycrosby25765 жыл бұрын
Video Starts:Jerryrigeverything holding the switch Me:PLEASE DON'T BREAK IT
@Excalibur012 жыл бұрын
I'm surprised Nintendo hasn't done this yet. I loved the purple transparent Gameboy color I got
@Stinky0368 Жыл бұрын
Finnaly after I finally find it 5 years later a CRYSTAL clear shell instead of the stupid foggy or unclear “clear” shells
@leleedler6 жыл бұрын
2:20 Earrape tooth whistle
@squishlez6 жыл бұрын
Le Leedler XD
@josemine88636 жыл бұрын
Le Leedler 😂
@awake3926 жыл бұрын
I thought I was the only one who heard that 😂
@patricka81016 жыл бұрын
Omg I have a headache now
@chadlawson70875 жыл бұрын
Thank you very much for this video. I am not very mechanical and I was able to follow these instructions and put a nice clear blue see-through shell on my Switch! You are the man!
@killersleeve3824 жыл бұрын
I very rarely comment on videos, but this is hands down the best tutorial of this I’ve ever seen. About to switch mine over to white and was going to make a video of it, but after watching this, there’s no need. He did way too good a job lol
@KevinCow5 жыл бұрын
2:17 - "Now the left trigger is a little bit of a pain, but I'll walk you through it." _Flies through this step with little explanation._
@MonocleCat4 жыл бұрын
Did you catch the sound he made
@Now_Its_Orange4 жыл бұрын
Yeah, does anyone know what the hell he ment when he said “decompress the pin?” I see no pins that need decompressing.
@endursa6 жыл бұрын
The antenna on the right joycon is for the Amiibo NFC functionality!
@mohida.4926 жыл бұрын
JerryClearEverything
@Feezee2233 жыл бұрын
Me: has the animal crossing switch and couldn’t do it if I tried. Also me: watches this and pays attention of how to do this.
@popsanddais4 жыл бұрын
i highly recommend a set of helping hands, they make putting the springs in so much easier as you can just clamp up the shell