Ballasting Track Made Easy

  Рет қаралды 580

JerseyHighlandsBruce

JerseyHighlandsBruce

5 ай бұрын

In this video we will look at the tools, materials, and techniques needed to ballast your track - and one tool in particular that will make the job easier!
Enjoy!

Пікірлер: 16
@GarlandKent-y6k
@GarlandKent-y6k 4 күн бұрын
[thank, you for you're helpful video]
@JerseyHighlandsBruce
@JerseyHighlandsBruce 3 күн бұрын
I'm glad that you found it helpful, Garland.
@williamsantangelo
@williamsantangelo 5 ай бұрын
Thank You Bruce
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
You are welcome, William.
@louanderson1264
@louanderson1264 5 ай бұрын
Great video and excellent tip about using a paint edger. For touching up in really small areas, I use a pipette to apply the ballast. Keep up the tutorials coming.
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
Thanks for the comment and for another good tip, Lou.
@dnhman
@dnhman 5 ай бұрын
Another tip is use a long paint brush handle and tap the tops of the rails which helps to knock bits off the ties,
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
Good tip, Joe.
@jimstrainsandstuff9539
@jimstrainsandstuff9539 5 ай бұрын
Nice demo Bruce. I use a very similar method with slightly different 'hardware'.
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
Thanks, Jim.
@railmus
@railmus 5 ай бұрын
Use a metal spoon to lay the ballast. Tap the rails with the spoon and the ballast settles in much better! Transmission fluid works just as well as the clipper oil.
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
Good tips, John.
@dnhman
@dnhman 5 ай бұрын
Hi Bruce good info. One suggestion on the oil as that's a real good point, try using conductive oil for those areas. It might help down the road.
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
Another good suggestion, Joe. The Wahl Clipper Oil is conductive. In fact, some model railroaders wipe a thin layer of that oil on the top of their rails. They believe that it improves pickup. Others think that it attracts dirt. I used to put one drop on each rail about 3-4 places on the layout and let the train wheels spread it around. Seemed to help smooth running.
@donaldkormos5529
@donaldkormos5529 5 ай бұрын
Thanks for the video ... gotta buy cork & code 83 track for next bigger layout since current has E-Z Track ... then I'll try your techniques!!! All the best ...
@JerseyHighlandsBruce
@JerseyHighlandsBruce 5 ай бұрын
You are welcome, Donald. Good luck with the new layout.
Easy Ballasting Step By Step (30)
14:04
Model Railroading
Рет қаралды 15 М.
The Clever Way to Count Tanks - Numberphile
16:45
Numberphile
Рет қаралды 743 М.
Finger Heart - Fancy Refill (Inside Out Animation)
00:30
FASH
Рет қаралды 29 МЛН
Mantua's "Little Six" and "Big Six" Locomotives
10:02
JerseyHighlandsBruce
Рет қаралды 102
Get Perfectly Ballasted Turnouts (161)
23:11
Model Railroading
Рет қаралды 10 М.
BALLASTING, the GRITTY TRUTH at Chadwick Model Railway | 190.
26:20
Chadwick Model Railway
Рет қаралды 44 М.
A Japanese layout in N-scale
17:35
mpeterll
Рет қаралды 11 М.
How To Model Realistic Ballast | Woodland Scenics | Model Scenery
4:44
Woodland Scenics
Рет қаралды 479 М.
Ballasting Model Railroad Turnouts: Tips and Tricks for Realistic Results
2:42
TheCreativeModellerHO
Рет қаралды 10 М.
I Don't Get Why People Still Use These Joints
17:26
Lincoln St. Woodworks
Рет қаралды 734 М.