Jet engine afterburner test with DIY Gasturbine

@Turbojetkart 4 жыл бұрын

Come see the new bigger and hotter engine running, new world record coming soon kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@Ellyy 4 жыл бұрын

hey thats nuts

@Turbojetkart 3 жыл бұрын

kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@user-ke9hc8dh9h 3 жыл бұрын

make a cooling system for your engine the most simple way is this that you make a lot of holes respectively in your pipe and cross cold fluid from theese holes

@misutatomasu Жыл бұрын

@@Turbojetkart Have you measured thrust on these? You should make a video on how you build these.

@danielbargas3377 9 жыл бұрын

Up if you were waiting for it to turn in to a molten puddle

@medvfx3370 9 жыл бұрын

Daniel Bargas ya damn right

@francolucien9448 8 жыл бұрын

+Daniel Bargas airplanes have the same problem. That's why most airliners use the turbofan jet, which allows for a great deal of cooling...on top of the engine's design which has internal cooling (compressed air bypassing the combustion chamber). These cooling methods alone reduce the heat by over 50% If he incorporated these same method, or at least the bypass method, then it wouldn't glow like that.

@stealhty1 8 жыл бұрын

+Franco Lucien Airliners Do not have after burner,,,everything else you were right about it

@Demonsrun 8 жыл бұрын

+Daniel Bargas Jet fuel can't melt steal beams ;-)

@francolucien9448 8 жыл бұрын

Doctor tell that to the government's 9/11 report!

@davelowe1977 9 жыл бұрын

That looks insanely dangerous. It is therefore excellent!

@szymon6207 7 жыл бұрын

48000rpm

@Turbojetkart 3 жыл бұрын

66000

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@xa-xii4865 2 жыл бұрын

@@Turbojetkart is it efficient

@PL3690 9 жыл бұрын

The real question is, will this fit in my Civic?

@Zuzufy 9 жыл бұрын

I have bad news for you. Even if it is possible, your car will escape from Earth with you)

@PL3690 9 жыл бұрын

Иван Haha I think it will produce enough thrust to reach escape velocity you are right

@rantaviouswilliams 7 жыл бұрын

PL3690 u gon blow yo junk up lol

@jethrobodine9617 7 жыл бұрын

PL3690 haha..lmbo

@LilC2000 7 жыл бұрын

PL3690 lol

@honestycounts9352 9 жыл бұрын

You've got to have a twin-walled afterburner, so that there is a cooling layer of air flow between the inner and outer layers. That way your afterburner won't get red white hot. It might get red hot but it won't melt like yours was about to melt.

@Turbojetkart 9 жыл бұрын

Honesty Counts Thanks for the comment, but once the kart is moving it soon cools off. have a look at videos of mine and my friends

@The_Original_forresttrump 2 жыл бұрын

Rocket engines pump super chilled fuel thru channels in the structure to keep them cooler and from disintegrating , the heat exchange pre warms the fuel as well. You can the pattern of dark lines on launch. That’s a win/win design.

@skippyguy3 Жыл бұрын

@Forrest Trump. Correct about the heat exchange but warming of the fuel was the primary design requirement. The dark portion of exhaust on an open cycle rocket engine (eg. F1 on the Saturn V 1st stage) was the exhaust from the gas generator used as boundary layer cooling. That was used to keep the exhaust bell from melting 👍

@leokimvideo 5 ай бұрын

I love this, the perfect 'piss the neighbours off' jet

@Turbojetkart 5 ай бұрын

you should see the new one kzfaq.info/get/bejne/m7RkmNyazLi-Znk.html

@electronicsNmore 9 жыл бұрын

Amazing that nozzle does not melt being white hot. Must be made of titanium.

@casemodder89 9 жыл бұрын

INOX V4A

@electronicsNmore 9 жыл бұрын

Never knew they had a stainless alloy that could tolerate that much heat.

@AidanGieg 9 жыл бұрын

Or Molybdenum, or Tungsten.

@Turbojetkart 9 жыл бұрын

EPaR - Aidan Gieg its 310 stainless :-)

@AidanGieg 9 жыл бұрын

Oh ok. :)

@AbuNaifHM 8 жыл бұрын

This is whats great about KZfaq, you get to experience the crazy stuff without having to be there

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@izhamlegend6961 4 жыл бұрын

Nobody: Do you have a lighter? Somebody: Yes

@Turbojetkart 3 жыл бұрын

kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@bouvardc.2334 8 жыл бұрын

seems like the average morning after a bad tacobell

@justshane9967 4 жыл бұрын

Bouvard C. Red hot, and full of doubt

@Aieou472 4 жыл бұрын

I live in england, therefore NO taco bell for me! :)

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@protafgupta5774 7 жыл бұрын

absolutely extraordinary. love this kind of engineering and technology

@Turbojetkart 7 жыл бұрын

thanks

@AceNinja2112 6 ай бұрын

That was frickin' awesome!!! I love the fire and sound!!!

@Turbojetkart 5 ай бұрын

you should see the new one kzfaq.info/get/bejne/m7RkmNyazLi-Znk.html

@car-man 4 жыл бұрын

I'm enjoying watching your good video. I support you in Korea.

@Turbojetkart 4 жыл бұрын

kzfaq.info/get/bejne/mt2Hf7J8q5PTaI0.html

@Thailerr 8 жыл бұрын

I love how you can see the metal expand once it gets red hot

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@asmith9091 7 жыл бұрын

A variable area nozzle helps to adjust the exit pressure of the combustion gases to ambient pressure. When they leave the turbine, the combustion gases have still some remaining pressure which is converted into speed by a convergent contour of the nozzle.If the combustion gases have enough pressure to be accelerated to supersonic speed, the nozzle is actually first convergent and then divergent to achieve the best acceleration of the flow. The convergent, subsonic flow accelerates until in the section with the smallest area, called the throat, the speed of sound is reached, and the following divergent section accelerates the now supersonic flow further until its pressure drops to ambient pressure. This con-di-nozzle needs to adjust both the cross section of the throat and the cross section of the exit area. Failure to get especially the throat area right will mean substantial thrust loss in operation. Afterburning engines need adaptable nozzles due to the different operating conditions in dry and wet mode, so they profit the most from adjustable nozzles. Reheating the exhaust gas means to increase its volume, so the nozzle needs to become wider to be properly matched. In general, if the exit speed of the combustion gases is supersonic, an adjustable nozzle is required. Even some early jets without afterburners had an adjustable nozzle: The central cone of the Jumo-004 nozzle could be moved fore and aft, which changed the location of the bulbous aft section, helping to get the throat area right.

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@houstonrailfanTX 9 жыл бұрын

Well that was amazing haha I love when stuff like this shows up on the homepage haha

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@martijnjonkers2179 2 жыл бұрын

Apart from the fact that this machine looks f* amazing, that exhaust colour and that sound😱😱

@Turbojetkart Жыл бұрын

Couldn't agree more! kzfaq.info/get/bejne/idSjZc6nrZvdnGw.html

@Turbojetkart 7 жыл бұрын

310 stainless steel.

@aaronisgrate 7 жыл бұрын

was going to ask if it was inconel. thx

@bayuamanda1901 6 жыл бұрын

How about welding join? They are not melting?

@nicos5537 6 жыл бұрын

Hahahahaha

@nicos5537 6 жыл бұрын

better titanium

@c.r.a.m.4005 6 жыл бұрын

andy morris holy Moly. BBQ for mens xD

@Livinghighandwise 8 жыл бұрын

That is bad ass on so many levels..

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@VillageTV 5 жыл бұрын

AMAZING VIDEO!

@Turbojetkart 3 жыл бұрын

Thanks , am sorry its taken so long to reply 😃 kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍

@matpio7 7 жыл бұрын

Thats amazing! Good job!

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@kobaltstaub287 8 жыл бұрын

I'm surprised it didn't start to melt, i was waiting to see flames come out from a tiny spot at first and wooosh! But it didn't happen thumbs up

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@tonygunk1886 7 жыл бұрын

ha, figures a Morris would do something like this ;) damn cool man

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@ultra8142 6 жыл бұрын

Wow the sound....wow....👏👏👏and also the exhaust pipe wow....

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@antcraft3590 7 жыл бұрын

Wow! The way that exhaust glowed white hot and even better, it didn't turn into a puddle!

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@electronicshelpcare 5 жыл бұрын

Wow..Amazing

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@SHRIKE427 8 жыл бұрын

Hey kids... This is a perfect example of "white hot"... Nice work, congrats !!...

@Turbojetkart 8 жыл бұрын

+SHRIKE427 Thanks :-)

@MissileGuidance Жыл бұрын

That's awesome 🔥🔥

@Turbojetkart 4 ай бұрын

kzfaq.info/get/bejne/odWjlZB5vq-wlmw.html

@sixstringedthing 8 жыл бұрын

I know a reasonable (though non-professional) amount about turbojet design and HOLY SHIT, that is the most awesome thing I have ever seen on KZfaq. Very very impressive.

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@electrospank 9 жыл бұрын

I like how the radiant heat of the nozzle toasted the earth under it. Looks like there may be some instability inside the flame tube but it's nonetheless impressive.

@Turbojetkart 9 жыл бұрын

does get nice and toasty ........ the instability may that the air is moving so fast, its getting close to speed that air and fuel have very little time to mix :-)

@electrospank 9 жыл бұрын

Must be why flame holders are so commonly seen. They create a region of high turbulence, combined with carefully placed fuel injectors, that keep the flame from sputtering out at full power. Another method I've read works well for DIY turbojets is to run steel fuel lines inside the flame tube prior to the injector to give the fuel time to heat up. If done right, the fuel will get smokin' hot before it mixes with the air, allowing the fuel to atomize more quickly, while keeping the hottest portion of the flame further up inside. This is a common reason why home made afterburners work for the first few seconds and then blow out. The injector itself is very hot initially, but after a few seconds the flow of fuel cools down the injector, allowing colder and colder fuel to enter the chamber.

@Turbojetkart 9 жыл бұрын

Hi.its is not only an area of turbulence the flame holders ( gutters ) cause. but they cause a lower pressure region which allows the fuel and air to mix and slow. We use a similar method in that we create a lower pressure region or pressure dump slowing the mixture down and holding the flame front.... i find most after burners that blow them self's out are caused from having to little region or pressure drop to handle the increased speed of the gasses from the engine as you increase power, the reason in my video the after burner seemed to go unstable towards the end of the video was the fuel was running out, leaning off the mixture which again if the fuel to air relationship is close to or beyond combustible leaves will cause bad results

@electrospank 9 жыл бұрын

We're not disagreeing, just using different terminology. A low pressure region necessarily creates turbulence. It's not really slowing down anything though, the absolute speed of the molecules in the turbulance may actually be greater than the molecules which are uninterrupted. If you are measuring only the speed going down the length of the tube, then yes you could say it's slowing. The sputtering is noticeable at other parts of the video, like around 1:02, so it would seem to me the design could be improved. Of course nobody can definitively say what's causing the issue by only watching a video. All I'm saying is, the flame isn't as stable as it could be, and a design improvement is warranted if you're interested in increasing the consistency and efficiency of the burner.

@carbon1255 8 жыл бұрын

It changes size so much! I don't think that the nozzle will last too long.

@grummhd3020 8 жыл бұрын

+Carbon 12 i think too

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@notfak 3 жыл бұрын

Thank you for this video, sir.

@Turbojetkart 3 жыл бұрын

You should see the others... thanks for your comment 👍

@WindOnMyWings 7 жыл бұрын

Too much fun watching this fan!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@gagebrandon6674 8 жыл бұрын

I almost thought it was going to melt!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@chocolateeyes7017 9 жыл бұрын

can i mount this on my turtle?

@Hells_Gate 8 жыл бұрын

salim mebarki only a ninja turtle, with hardened shell, haha

@user-xw4zt9gc7l 4 жыл бұрын

Hells Gate HEROES IN A HALF SHELL, TURTLE POWER

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@MrBen527 9 жыл бұрын

Great vid Andy!

@Turbojetkart 9 жыл бұрын

thanks

@PracticalProjects 8 жыл бұрын

Nice work!!!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@youbuusta 8 жыл бұрын

That is so fucking cooool!!!!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@kevinhorn6285 9 жыл бұрын

You wouldn't need a C-D nozzle but your are definitely under expanded coming out of your converging nozzle and are throwing away some performance. Giving yourself a bigger area at the exit looks like what you need. Any idea on the ratios of areas from the turning exit to the nozzle exit?

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@apocraphontripp4728 3 жыл бұрын

Wow what a great project...thank u for the vid. Humbly, id like to make a suggestion. The reason its getting so hot is the exhaust has to be able to open wider. Im planning on using a stain less vegetable strainer that can open and close. Also there is a ceramic coating you can coat the afterburner with. Its used in automotive turbo / manifold application to keep heat down. Best of luck.

@Turbojetkart 3 жыл бұрын

Great suggestion! but once its moving at 116mph, thing run a little cooler, the 310 stainless has held up for 7 years, and is checked for stress etc after every run, the new engine is 1/3 rd bigger, so the afterburner is, will find out soon how the bigger size does with the heat ?always nice to get good comments 😀 you mite like some of these kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍

@screwsnutsandbolts 6 жыл бұрын

Awesome :)

@Turbojetkart 6 жыл бұрын

kzfaq.info/get/bejne/mt2Hf7J8q5PTaI0.html

@TROllingNINJA2031 9 жыл бұрын

thats horrifying yet awesome

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@pforce9 6 жыл бұрын

That thing gets hotter than Hades.

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@jlbrebels 8 жыл бұрын

That is absolutely amazing

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@charliealpha2095 4 жыл бұрын

Absolutely amazing

@Turbojetkart 4 жыл бұрын

kzfaq.info/get/bejne/g91gfZea39bdeGw.html

@noctis00 3 жыл бұрын

😱😱 did you really make that??! that's so sick!

@Turbojetkart 3 жыл бұрын

Yep... plenty more on my channel... the new bigger engine

@noctis00 3 жыл бұрын

@@Turbojetkart ok I'll check it out. Keep making these amazing stuff!!

@Turbojetkart 3 жыл бұрын

@@noctis00 I plan to .... new project coming soon

@robertlong6311 7 жыл бұрын

damn. how close to the 310s melting point have you gotten or does it get stable at a certain temperature?.

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@Hellcat1960 9 жыл бұрын

Very cool Andy.

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@djbrightbrian2668 5 жыл бұрын

You got all my respect

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@drkastenbrot 8 жыл бұрын

I can feel the power

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@waqertomskinoski744 8 жыл бұрын

Watching it glow ha reminds me of spongebob " my eyes"

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@VRWarLab 8 жыл бұрын

YOU ARE GOING TO MELT IT!

@Turbojetkart 8 жыл бұрын

+Néstor Villarroya nope...... kzfaq.info/get/bejne/i7Sqeqt4sanZYWw.html

@landcruiser11rum 6 жыл бұрын

That's awesome, your awesome, I want one!

@Turbojetkart 6 жыл бұрын

Hi and Thanks , i hope you don't mind, but wanted to share video of start of new project kzfaq.info/get/bejne/aa-WfZN1qc7ZdJ8.html

@impostrous 7 жыл бұрын

Jet fuel can't melt steel but at 1:17 I was about to doubt it

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@Predator-em7rv 3 жыл бұрын

Watch it from 1:45 . Get's even better

@nyx211 7 жыл бұрын

Wow! You can even see the metal expand from the heat.

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@eligoodyggg7120 8 жыл бұрын

best one i have seen on youtube

@Turbojetkart 8 жыл бұрын

+eligoody ggg Thanks

@eligoodyggg7120 8 жыл бұрын

+andy morris that's a lot of thrust is provides

@mihirsoni08 7 жыл бұрын

I was thinking that it'll melt n drop down like drop by drop, but no it's verygood quality. Impressive

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@MRJK87. 8 жыл бұрын

anyone else come to comment section looking for the guy that says "I wana touch it"?

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@ErnestJay88 8 жыл бұрын

Put wings on your Kart and start flying.

@qrelectronicrepair1802 4 жыл бұрын

My fat ass thought you was talking about food .

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@JoshuaRinaldi 3 жыл бұрын

huwaaaaaaww that super cool afterburner...

@Turbojetkart 3 жыл бұрын

Hi, thanks for your comment... kind of you.... have you seen this.... things do go wrong some time..... please if you dont mind, like , share and perhaps even subs 👍 kzfaq.info/get/bejne/qLWAlNComqiUdGw.html or kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@brianheaton5521 2 жыл бұрын

:55 it was at this point, i knew i needed this in my life. For reasons....

@Turbojetkart Жыл бұрын

🙂👍

@blackkissi 7 жыл бұрын

+andy morris Have you measured the thrust on that engine? Would be interesting to know

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@Werbutlemon233 8 жыл бұрын

Nice build andy now put it on a hang glider ;)

@Turbojetkart 8 жыл бұрын

+Werbutlemon233 Would be interesting , but are you going to fly it

@Werbutlemon233 8 жыл бұрын

Are you genuinely serious ? If so I would love to try! I've never flown a hang glider before never mind a jet propelled one :) every give a thumbs up if they want to see this happen lol

@donvreeland8844 8 жыл бұрын

+Werbutlemon233 How with that much thrust? Goodness! There were valveless pulsejet kits for that back in 1970's!

@Lambda420 Жыл бұрын

That was awesome

@Turbojetkart Жыл бұрын

Check this out .... kzfaq.info/get/bejne/etN9idSqy9ipcqs.html

@HWbilLY 6 жыл бұрын

i love that sound..

@Turbojetkart 3 жыл бұрын

kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@WheelsRCool 8 жыл бұрын

What material is the nozzle thing made out of? I imagine it must have an incredibly high melting point.

@jannis01 5 жыл бұрын

Kyle Blank aluminium.

@yowaddup5649 4 жыл бұрын

Potassium

@z80ad85 4 жыл бұрын

310 stainless steel. he replied with this in another comment

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@martyisabeliever 9 жыл бұрын

what no dancing diamonds?... back to the drawing board.

@Turbojetkart 9 жыл бұрын

With this type of engine you would be hard pressed to get any, only single stage compressor

@martyisabeliever 9 жыл бұрын

andy morris J.K.... nice cart

@Turbojetkart 9 жыл бұрын

Thanks

@233kosta 9 жыл бұрын

andy morris I can help you with those by the way, if you can get me your nominal operating pressure, temperature and mass flow rate. I'm not aware of your background and thus knowledge of gas turbines, so I'll just chuck this out there - using a C-D nozzle at the back of your engine (rather than just a converging one) gives you the capability of producing supersonic exhaust, which (for the same mass flow rate) ultimately results in more thrust. Apologies if you knew that already martyisabeliever Shock diamonds usually present when a reaction type engine (rocket, turbojet, ramjet, etc) operates in the underexpanded condition. The exhaust nozzle causes the exhaust gas to reach the speed of sound at its throat. Any extra mass flow rate just increases the pressure at the shockwave. This is known as choked flow. A C-D nozzle then diverges, giving room for the gas to expand and accelerate, causing a drop in static pressure. An optimally expanded nozzle accelerates the gas to the point where static pressure in the flow equals the environmental static pressure. Expanding it further may result in flow separation inside the nozzle. Underexpanding it leaves the static pressure in the gas higher than that in the outside environment. This causes the formation of shockwaves within the fluid, which reflect at the boundary between exhaust gas and environment, resulting in the pretty diamonds you see. You really don't want that if you're after thrust though as momentum change is a much more efficient way to gain extra thrust than a pressure differential.

@Turbojetkart 9 жыл бұрын

Thanks for the comments, yes C-D nozzle has been talked about with others in the group i am a part of, but for me the added cost of making one and then the question will it give improvements or not at the moment keeps me from trying, i have a lot on with my bike project kzfaq.info/get/bejne/q56afJRztda0g5s.html

@timescope1473 8 жыл бұрын

that was cool, I like that!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@harrycave6309 5 жыл бұрын

That’s fucking awesome nice job

@Turbojetkart 5 жыл бұрын

Thanks, am just starting build of new bigger engine... hoping afterburner works as well as this

@seanroland612 7 жыл бұрын

Pretty close to what happens when chuck Norris eats Taco Bell

@Daniel-dc5mr 7 жыл бұрын

lol

@simokoistinen7470 7 жыл бұрын

No, this is close what happen when Chuck Norris farts.

@sunrisemusic5456 6 жыл бұрын

sean roland chuck norris memes are dead

@Turbojetkart Жыл бұрын

patreon.com/jetenginesandymorristreon?Link&

@kevinwu4928 8 жыл бұрын

Just put some bacon on and you got your mid night snack P.S might wake up your neighbors

@user-ps9im5td8h 8 жыл бұрын

иришт

@MrBioniclefan1 8 жыл бұрын

LOL

@ahamabsumon4381 5 жыл бұрын

Mango

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@DMoots 6 жыл бұрын

Unreal! I wouldn't want to be anywhere near that thing! :P

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@humeyra84 8 жыл бұрын

I will fly to the skies with this

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@qewqeqeqwew3977 2 ай бұрын

That would be a short flight. I would be surprised it lasts a whole minute.

@easykro4552 4 жыл бұрын

2:10 my AMD Cpu in idle lmao

@Andrecio64 4 жыл бұрын

Overclock and Burn it

@Turbojetkart 3 жыл бұрын

you might like some of these 😀 kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 😀👍

@ratheonhudson3311 4 жыл бұрын

Seeing steam coming off the turbine area is a good thing because you are letting excess build-up bleed away and also this is not inside a jet that's have air moving fast enough to cool the body, so bleeding hot air while standing still is a good thing

@Turbojetkart 3 жыл бұрын

😀👍Hi thanks for the comment 😀, you might like some of these kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html 👍 Kind of you to comment kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 😀👍

@tanmaysahoo1 7 жыл бұрын

magnificient work .....

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@zach7147 8 жыл бұрын

Awesome!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@demoncore239 8 жыл бұрын

Somebody get the bacon

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@NenadBogoevski 9 жыл бұрын

Is it hot? No the the road is melting!

@SuperXtornado 8 жыл бұрын

really? 0.0

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@ufoengines 6 жыл бұрын

SO COOL!

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@rafaeldasigni581 8 жыл бұрын

Wow it's like sun's energy and power.

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@milesinnz 8 жыл бұрын

That is insane, how could you be sure the whole thing just did not melt at those white hot temperatures ?

@Turbojetkart 8 жыл бұрын

+Miles Dugmore ..... Hi thanks for your comment. This was just one of many tests done over the years on engines and afterburners i have made There is always a small chance things could fail, but experience and testing helps prevent it,

@journeytheoutdoors 8 жыл бұрын

I dare you to lick it...... ...I triple dog dare ya!!!!

@kobeyehlers 8 жыл бұрын

I will... When its turned off

@yann9378 6 жыл бұрын

kobey ehlers nice one

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@Banzay27 6 жыл бұрын

I'd never seen anything match the Sun's incandescence. Solaire would praise the Hell outta that.

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@christophergaucher2773 6 жыл бұрын

Amazing dood

@Turbojetkart 3 жыл бұрын

kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@Turbojetkart 8 жыл бұрын

for those who want to see this kart setting a new world record kzfaq.info/get/bejne/i7Sqeqt4sanZYWw.html

@RicardoJMGuimaraes 8 жыл бұрын

+andy morris Whit some pressurized water in chamber, perhaps you can get less heat and more pressure

@ak47suki242 8 жыл бұрын

+andy morris If it's running hotter with afterburner doesn't that mean it could be using more fuel in non-afterburner mode? My reasoning is that an afterburner is supposed to add reaction mass not fuel per se. Of course you're the one who's made a jet engine so I could be an idiot.

@kwv10jaar 8 жыл бұрын

Uh Uh. Afterburner increases the exhaust gas temperature. Nozzle runs choked at sonic speed. Sonic speed increases with square root of gas temperature. Hotter exhaust gas means higher momentum due to higher exhaust speed. Thus, HIGHER THRUST.

@610ericma1 8 жыл бұрын

+andy morris how much thrust are you makeing

@Turbojetkart 8 жыл бұрын

+610ericma1 Not sure, on paper the numbers are around 200lbs, need to make some kind of test bed

@Turbojetkart 8 жыл бұрын

have a look at some of my other video's... :-)

@gijsmarkwat 5 жыл бұрын

I like how the ground is heating up to the point of steaming

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@somen55 8 жыл бұрын

Though it won't live very long, it sure looks awesome ^^

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@Turbojetkart 6 жыл бұрын

This is what it did when out on the airfield kzfaq.info/get/bejne/pbR8itSrpp-vonk.html

@akashsinghrathore2283 5 жыл бұрын

Can you please tell me the size of your turbocharger and other specifications ? SIR ?

@tylers5952 5 жыл бұрын

@@akashsinghrathore2283 i see the turbocharger

@TegarBajigur 4 жыл бұрын

Still active on youtube didnt ya 😂👌

@nelsongtj 8 жыл бұрын

Impressive!

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@GreatYue 8 жыл бұрын

almost melt the whole thing, good control

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@acgleal 9 жыл бұрын

Fantastic!!!!!!!!!!!!!

@Turbojetkart 9 жыл бұрын

thank you

@rav4066 5 жыл бұрын

You're neighbors must love you.

@Turbojetkart 3 жыл бұрын

hi, sorry it taken some time to reply, but thanks for you comment, things have come a long way since then 😃 116mph world record, and more, it be real epic, if you have not already, that you could subsvribe, its free lol, but helps me so much, helps making projects and videos, you could be doing your bit to help set another world record ❤ 👍😃kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q 👍kzfaq.info/get/bejne/n9iglc2S3s3aqWg.html

@mchristofas 9 жыл бұрын

Awesome! Your neighbors must love you!

@Turbojetkart 9 жыл бұрын

most come out to see the testing :-)

@jocrp6 7 жыл бұрын

That's BADDASS!

@Turbojetkart 3 жыл бұрын

kzfaq.info/sun/PLO-dgzVeQXyn-UIbptnhMXi-b9IswhP8Q

@jvargas454 9 жыл бұрын

That's insane!! Wow ! I would not have counted on those stainless steel parts to hold up at those temps. I was thinking there was going to be a melt through and explode, especially at the weld joints. Hope you guys were behind a safe barricade. Still an awesome experiment. Interesting conversation about molecular flow. How about the bearings, did they get fried? Would magnetic bearing work? I work with vacuum turbo pumps that spin very fast and use this method to reduce friction. The only problem here is keep the magnets cool, (below the curie point). Good job guys. Thanks

@Turbojetkart 9 жыл бұрын

Hi, the bearings are fine :-) this is not an experiment :-) it was a test of the diy gasturbine engine on my go-kart,i was doing the test to see how improvements had work, here is a video of it on the track last year kzfaq.info/get/bejne/ntemq5p4x7Pbm2g.html