Jet Powered Scooter
Рет қаралды 4,172,003
Жыл бұрынI Mount a Jet Engine on my Electric Scooter to see just how crazy it will be and how fast it can go!.
The electric scooter that I'm using is an all-wheel drive Fiido Beast, the jet turbine has almost 100 lb of thrust, it's a really crazy project and one of the few projects that I was actually a little afraid of a little.
The scooter has a combined weight with me as the rider of about 300 lb, so that is quite the power-to-weight ratio.
The scooter was a ton of fun even without the jet engine I have taken this thing on road Off-Road and I usually get to the store faster on the scooter than in the car, in the city at least.
Here's Links to the Fiido Beast Electric Scooter and the HydroDiesel, after riding this scooter I never looked at any other scooter the same again, I have so much fun on this thing!.
Scooter Link: bit.ly/WarpedPerceptionFiido2...
HydroDiesel: bit.ly/HydroDiesel-Warped-Per...
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
@MrCrofty1993 Жыл бұрын
Can we appreciate how clean this guy's welding is
@dmanm85 Жыл бұрын
They are real welds too.. not tiktok welds
@CrazyFunnyCats Жыл бұрын
He sure takes pride is his skills! 👍☕️☕️☕️🐿🇨🇦
@zeus6793 Жыл бұрын
I ran auto service departments for years....I've seen ONE other guy who had welds like that. That's in 30 years!
@CrazyFunnyCats Жыл бұрын
@@zeus6793 best looking welds look like chicken shit with no bubbles 😹👍 MIG is our fav welding Stainless is too toxic We had 2 uncles die from throat cancer from that
@MrTaylorfenoglio Жыл бұрын
Bro you obviously never been on the internet before. Rule #1 is never complement a tradesmen on his work. Especially welding!!
@mrnine324 Жыл бұрын
I can't believe nobody came out of their homes wondering why a jet engine sounded so close. Imagine chilling in your living room, and then hearing the sound of that turbine spinning up and thinking "did they build an airport nearby?"
@DR-pl2zi Жыл бұрын
TBH the whole video FIRST im impressed , SECONDINGLY where the hell are PPL @ no one poke their faces out lol ??
@DallinDyer Жыл бұрын
@@DR-pl2zi third, how did his hat stay on at 60 mph without turning it around backwards?
@DR-pl2zi Жыл бұрын
@@DallinDyer lmao 🤣💯 I've done 62mph on high octane ported gtr46 GOPED AND yes I agree with YOU 🤣💯
@DallinDyer Жыл бұрын
@@DR-pl2zi haha seriously though, its impressive
@giorgiodelvai7712 Жыл бұрын
LOL , it will scare me as fuck if i hear that while im chilling xD
@joshuacaylor881 Жыл бұрын
Your fabrication skills are next level. Truly remarkable to watch your process.
@overlvlresistant7720 Жыл бұрын
OH MY GOSH... This guy is the guy. He is literally *THE* guy.
@sapoman01 Жыл бұрын
"Get up and do something with yourself. Learn some skills, build stuff and have fun." I admire that mindset sir, thanks a lot.
@BeefIngot Жыл бұрын
I feel like a bad dismount on that would be like a motorcycle crash. I'd want full skid gear/padding/neck bracing for that.
@WarpedPerception Жыл бұрын
Yes true
@Retro_Rich Жыл бұрын
Serious lack of PPE. Organ donor scenario. Balls the size of Zelensky though. Cell phone with a speed app would have helped with the jet propulsion only run.
@ninelaivz4334 Жыл бұрын
@@Retro_Rich Zelensky has balls? Zelensky is a fucking neo con puppet. Fucked up his country when the Russians were offering deals for years.
@dragonsword7370 Жыл бұрын
@@Retro_Rich my town has a rentable online ran scooter service for standing or sitting models a couple of months ago. The fine print states the need of pads but no one does. One girl on her first ride wiped out and needs facial reconstruction from a broken face. Other injuries are still coming into the hospital. That company was trying to hire guys to run around and pick up scooters but I don't want to be tied to that company unless I'm desperate for work.
@CorDawgYT Жыл бұрын
At least he put helmet on eventually. Being a meat crayon is no good for anyone. It can happen from something as simple as a squirrel running across the road.
@saintkenny9296 Жыл бұрын
That is balls of steel right there! I could see the jet engine getting you up to 100 mph. I just don't think you'd make it out in 1 piece. Good thing you knew when the steering was getting so hard to control, you just knew it was time to slow the hell down! This is super cool, but also super dangerous! Super sick engine and very fun test!
@InterestingOrlanoVid Жыл бұрын
Impressed with his build! Who the heck has all the right machines at their disposal to fabricate such a beast of a scooter.?!?!?!
@StopSayingGaslit Жыл бұрын
Imagine a 1960’s TV commercial for an older version of this product. I could totally see a rudimentary version of this being a toy company’s best/worst idea. Example: Lawn Darts, gas powered pogo sticks, and 3-wheelers
@123123boobies Жыл бұрын
Those were all great ideas anyways. Expecially 3 wheelers. Those things are fun. Stuff needs to stop being banned because of dumbasses not being careful.
@StopSayingGaslit Жыл бұрын
@@123123boobies I agree, I had one for a long time..just gotta know how to ride it
@StopSayingGaslit Жыл бұрын
@Space Ghost EZ bake ovens were no prize either
@mickgibson370 Жыл бұрын
@@StopSayingGaslit My little sister had one! I bake cookies in it!
@eksine Жыл бұрын
Want to send grandma into the afterlife faster? Have we got a wheel chair for you! Only $29,999
@rotax636nut5 Жыл бұрын
This is by far the best thing you've done, you could market this in kit form so other completely crazy scooter owners can try to kill themselves on it, I can hardly imagine a more dangerous machine to use on a public road, GREAT, I want MORE!
@WarpedPerception Жыл бұрын
I was thinking about doing that
@proxyhx2075 Жыл бұрын
@@WarpedPerception It would make a great kit to be honest
@michaelwest2388 Жыл бұрын
@@WarpedPerception DOOOOOOOOOOOOOO IT
@yamammaatrick Жыл бұрын
@@WarpedPerception $$$$ I would buy a kit from you if you start selling them. Would be the only reason I'd want the scooter lol.
@theforgottenera7145 Жыл бұрын
Until someone dies
@jamesratcliffe8470 7 ай бұрын
Brilliant, inspirational, great attitude.
@CTrane88 8 ай бұрын
Wow! You're brilliant. Definitely inspiring!
@JoelCreates Жыл бұрын
That cage is gorgeous, looks too good really
@WarpedPerception Жыл бұрын
Thank you
@ughmas Жыл бұрын
This is absolutely rad, the sound of the jet winding down as you come to a stop is so badass
@gazwild438 11 ай бұрын
Wow, this is the 2nd video I have watched on your channel, and all I can say is thank you so much for your content, can’t wait to binge watch, and you are absolutely fearless. Absolutely amazing work 👏🏼
@MrHansen 11 ай бұрын
This has got to be the craziest and cleanest project build you have done to date. Kudos on the fabrication and final outcome. Way too cool !
@WarpedEnEspanol 3 ай бұрын
Thanks, I thought the newest go-kart came out clean too
@GrindHardPlumbingCo Жыл бұрын
We should build a jet powered Power Wheels ride on toy... 🎆
@WarpedPerception Жыл бұрын
Let's do it I heard from my brother rich your good guys
@jurriendw050 Жыл бұрын
Put a jet engine temporarily on the jetboat
@liamblogs Жыл бұрын
@@WarpedPerception I’d buy something like that
@xanderhol2336 Жыл бұрын
Can I have one
@Undjetzt1 Жыл бұрын
😅👍
@Sludge73 Жыл бұрын
How'd I miss this, awesome scooter by itself. That jet cage looks awesome. The whole project is a complete success. Thanks for sharing!
@doriankeating1963 8 ай бұрын
Your engineering is A1 .. none better.
@lefthandedscrewdriver3954 Жыл бұрын
I'm impressed with your design and fabrication skills! Great video s
@RatherBeRestoring Жыл бұрын
Jet powered ANYTHING from WP and I pause whatever other video I’m watching!! 🔥🔥🔥
@FaceFaceMan Жыл бұрын
The quintessential "cruisin' for a bruisin"! I'd be decked out like Mortis the Safety Tortois. Your fabrication is outstanding. Those seams on the fuel tanks look like a robot welded them.
@samgerland6087 Жыл бұрын
Amazing build. Really inspiring and beautiful.
@williamickes3143 9 ай бұрын
Very nice work. I like it!
@shredder8910 Жыл бұрын
Really appreciate all the awesome fab work that goes into these projects. Really inspiring and what i'd hope to be able to do someday in my own garage. Full design to part. Tons of hardwork that goes into these videos, only shown in a little 30 second clip, so we can have these awesome engineering videos.
@JayLang7 Жыл бұрын
I just love the way you build stuff. Much respect to you!
@akathecops 11 ай бұрын
Ur a hero brother. All your projects have my grandson inspired. Thank you from the bottom of my heart. Dish
@sx20Ramar 11 ай бұрын
I think those high power scooters are dangerous as hell, and you put a jet engine on it! Great job putting it all together. Looks awesome!
@spaceaddict5484 Жыл бұрын
This was awesome! The small wheels would probably be sketchy at high speeds, but if they were bigger you'd get way less wobble.
@glitchmaster643 Жыл бұрын
He was riding the scooter the wrong way so his stability wasn’t good because he was standing forwards with both feet right next to each other and not in front of each other so that’s why it’s wobbly
Жыл бұрын
That's why steering dampers exist
@glitchmaster643 Жыл бұрын
@ yeah well I can’t afford stuff like that
@proxyhx2075 Жыл бұрын
@@glitchmaster643 A high quality one would cost you less than 60 bucks, would you rather instead pay with your life? It wouldn't burn a hole through your wallet that's for sure.
@Blox117 Жыл бұрын
if you are concerned about speed wobble a bike would be a lot better really.
@teimll Жыл бұрын
“Ghetto neighborhood”? I’m not sure that words means what you think it means. 😜 GREAT scooter though! Thanks for making it and the video! Such a cool sound pulling up. You are a brave man!!!
@nickgibson1191 Жыл бұрын
I was looking for this comment!!! Suburban ghetto?? Makes no sense Haha matt rocks tho
@akplayz1154 Жыл бұрын
Well, you saved me from typing that out myself. That's a beautiful neighborhood compared to where I live. Cool project though, looks nice.
@vaderdown26 Жыл бұрын
i was thinking the exact same thing. I was like bruh this video is cool and all but you think this is a Ghetto? Guess he doesn't know what a Favela is then 🤣
@drestaura_2 Жыл бұрын
Great invention sir amazing! God bless you 🙏🙏
@GeorgeMaldonado-zz4vx 11 ай бұрын
Dude I love your creativity,can't wait to see what you do next,G.M.
@privatename3621 Жыл бұрын
"I've never ridden a jet powered scooter before, I was gonna bring my helmet but forgot it, but I do have my gloves. Let's see what happens!" ...definitely a "warped perception". Glad you survived it.
@Leonardokite Жыл бұрын
You're crazy Matt. You take the ludicrous and make it happen! What an awesome little scooter project. You never cease to amaze me. Oh, and shame on you for not wearing your helmet that first ride. 😢😉
@genghisfimpley3516 7 ай бұрын
This guy is very talented. The final product looks like how it would come from the factory if they offered a jet powered option
@asdlfkj12jieweo21 Жыл бұрын
Mad Respect for your technical skills mate - cool project
@testurenergy Жыл бұрын
The frame for the turbojet looks sick. Nice design.
@user-mr9sg3cx9p 7 ай бұрын
My brother I love your work
@happybaals Жыл бұрын
Was anyone else impressed by his clean welds??
@clubasbunkeras5738 Жыл бұрын
Зачем мне швы ,главное ноги и голова целы!
@ZEEKUPP 10 ай бұрын
Yes.
@htownblue11 Жыл бұрын
Matt!!! I love it when you’re “in the lab” creating cool ideas man. I never know what I’m gonna get in the next video, but I always know it’s gonna be something fantastic.
@magnetoone2995 Жыл бұрын
Absolutely amazing that you make everything yourself! Hats of to you sir!
@filiplaskovski9993 Жыл бұрын
Incredible fabrication!!!!!
@gatambojames Жыл бұрын
This is a show of mastery of talent, fabrication and ingenuity.
@yodasbff3395 Жыл бұрын
I love the sound of a jet engine 👍, too bad they burn so much fuel. Beautiful fabrication on the jet engine mount 👍.
@timmanboy1 Жыл бұрын
I had considered building an experimental plane with 4 of the bigger jet cat engines. Roughly calculating around 80 gallons of fuel burn an hour.
@WoLpH Жыл бұрын
This build was absolutely amazing. I really love it, so well thought out and executed!
@user-ke2ll9uw7h 6 ай бұрын
Awesome! A scooter with a jet engine, unbelievable! You're a very skilled individual, hats off to you!
@user-yg2gn8rl6d 10 ай бұрын
Amazing!! You are our NEW IRONMAN in the next couple of years..
@joshuagibson2520 Жыл бұрын
Matt, you do great work. Top to bottom. Even your filming and editing are great. Always a pleasure when you put a new video out.
@rehanshah8400 Жыл бұрын
Love your all videos love from India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
@pcallas66 Жыл бұрын
I definitely never thought of that one. That's just cool.
@zhamletstudio4846 7 ай бұрын
Wow... cooled ... awesome
@Sandy.J.Lloyd.Sr. Жыл бұрын
Would love to see you make another run with a speedometer, love the retro styling on the jet engine. Will definitely share this video, keep up the great content.
@WarpedPerception Жыл бұрын
Thank you
@MrMbuttron Жыл бұрын
@@WarpedPerception was this shot in palos off of 135th and harlem and by the wonder bread factory ? i live very close to you and i have a monster of a project id like to show u
@TeslaLiam Жыл бұрын
@@MrMbuttron What big project are you talking about?
@ghostrunner2138 Жыл бұрын
Measure the distance from the telephone poles and you can see how long it took in the video
@Sandy.J.Lloyd.Sr. Жыл бұрын
@@ghostrunner2138 Being that’s all it takes to calculate the speed of his final run, how about you letting everyone know what that speed is? I’m sure Mike would like to know as well.
@MightyCalves Жыл бұрын
Awesome work! If you'd wanna improve this project, install a steering damper and change tyres to PMT. As for safety, get full motorcycle gear and change stance to one foot in front and one back.
@grantandrew619 11 ай бұрын
feet side by side is much safer, one foot forward only leaves one way to exit scooter. yes I know i've been trained in dismounting from trains, so like it or not, you;re wrong
@MightyCalves 11 ай бұрын
@@grantandrew619 Trains 😂
@guiemnk Жыл бұрын
It would be wonderful if you could make a video explaining how all the electronics work and everything that needs to be done so that one can recreate these projects at home.
@Isaac-tr7pu Жыл бұрын
No
@Nocrofade Жыл бұрын
bro no way he will let entire humanity travel using scooters with fighter jet engines.
@zawditudacosta2890 Жыл бұрын
Nah.. people will be hittin windows instead of curbs.
@BestMods168 11 ай бұрын
No
@-NME Жыл бұрын
Next time put ur smartphone in ur pocket with a GPS speedometer open, it will measure the maxspeed and save it so you can check it after u done with the run :)
@simonm.456 Жыл бұрын
It is wonderful that some heroic people see the real questions that need to be solved. A question that many of use thought many times and than need to be answered. A question deep in our childish souls. - "What happens when I mount a jet engine on this." Thank you, good sir.
@torhavardtaft6485 8 ай бұрын
Love IT 😂❤
@jamesvanderbeek19 Жыл бұрын
Wow....this is so cool..I'd like one on my minibike Awesome build.
@TheGiantsWillWake Жыл бұрын
Dude! First time on one of your videos, and I love that your work is so clean and well-done. It's really a joy to watch someone who does really nice work. Hats off!
@ContentWizard Жыл бұрын
Hats off… And helmets on! :-)
@clubasbunkeras5738 Жыл бұрын
Пока не выехал мусоровоз!!!
@clubasbunkeras5738 Жыл бұрын
Мусоровоз отработал иначе асфальт был бы мокрый от лепешки крови !!!!
@bonafide9085 Жыл бұрын
Regen brakes has a little magnet and a hall effect sensor built into the brake lever. Depending on how far you pull the brake, the resistance of the sensor will change providing feedback to the motor controller. Basically it tells how strong the regen should happen.
@maverickwatchreviews 11 ай бұрын
Dude's welding game is next level!
@Joseph-fw6xx Жыл бұрын
Man u a very inventive guy great ingenuity
@JohnTaylor-aftrwjt Жыл бұрын
Man! I wish I had a tenth of the equipment that you have!! That's figgin awesome!!!
@samueljordan5601 Жыл бұрын
Your welds are really good looking dude, keep it up
@SilverWillGame Жыл бұрын
Heyo this is the guy u met at home depot. Ur videos are amazing the editing is smooth and clear to watch keep it up 😊
@AlexEMF Жыл бұрын
I really wish you provide numbers like acceleration numbers, top speed, power to weight ratio, etc. It's gonna give us a lot better prospective to what we're looking at. Please, try to figure out some ways to do that in your next projects. Thank you for what you do anyway because it's great.
@ZueTubeTv Жыл бұрын
for what , this shit is dumb
@alaricwilli6482 Жыл бұрын
I would suspect that it's not regenerative braking that's causing the issue. Rather the motor controller can't cycle the magnet phases quick enough, meaning they won't be pushing/pulling at the correct time. Alternatively you are indeed generating to much power and it is starting to flow backwards into the motor controllers. Regenerative braking works like this, but only when the brake switch is triggered and it is turned on. If your scooter has a coasting function then it may solve the problem by turning it on.
@TeslaLiam Жыл бұрын
Very true!
@WarpedPerception Жыл бұрын
Yeah a coasting function would do it, I reached out to the manufacturer after this happened to see what they say they haven't got back to me yet
@Blox117 Жыл бұрын
incredible, i explained exactly what was wrong with this setup and my comments were deleted
@WarpedPerception Жыл бұрын
@@Blox117 why did you delete your comments? Because I didn't delete them.
@Blox117 Жыл бұрын
@@WarpedPerception it was deleted by youtube. my comment told you that the magnets cause eddy currents that slow you down more as speed increases. you need to replace them with non-motor wheels.
@tieflabs 3 ай бұрын
Thank you for much for share, I Like you work and the resoan is that you are hardworking guy, i like you
@freddiewilliams8858 Жыл бұрын
Absolutely love it .
@andyroo3022 Жыл бұрын
I appreciated your awesome fabrication work and nice welds. The sound of that jet made me smile. I can imagine being in one of those houses and hearing that scooter go past, saying "WTF is that". Well done
@raymondwarnerofficial Жыл бұрын
This is absolutely wild. Any guesses as to what the fastest speed you got on it was? Would love to try something like this out one day!
@nighthawk0077 Жыл бұрын
62km/h
@ChristopherGuilday Жыл бұрын
Looked like about 40-45 MPH.
@Herbertti3 Жыл бұрын
@@nighthawk0077 I've done more with my regular FLJ T11, comes also with 100km range which equates to 70km with my fat ass.
@___xyz___ Жыл бұрын
6:33 thank me later
@___xyz___ Жыл бұрын
9:14
@infobaseworks2401 11 ай бұрын
Quite possibly the most innovative video on youtube
@ulrichmachtle4864 Жыл бұрын
one of the first test pilots of the allies after the war flew the ME 262 said the same, It was like being pushed my a giant angel...
@DetroitMicroSound Жыл бұрын
Man, your design and fab skills have really gone to a high standard. -Maybe a simple steering damper will safely allow higher speeds! 😉
@MARIOMENTAL Жыл бұрын
You are a Genius brother
@VictorRodriguez-rd5xl Жыл бұрын
That has been the coolest scooter I've ever seen my friend Period!!! You did an awesome job WOW 😲😲😲 congratulations thanks for sharing
@robertlu893 Жыл бұрын
Extremely nice build very impressed
@laetitialeroi6753 Жыл бұрын
C'est pas concus pour une trot.. My friend.. Patent are not légality. You are reallly a génius but dangerous.. For thé peoples who see your concept.. Anyway you are great..... My friend..
@kelval5679 Жыл бұрын
Fantastic project.. Tell me what would I need to do a similar project.
@dei-wan-grey3888 Жыл бұрын
Wow Incredible
@4kforlife386 11 ай бұрын
Woow incredible work you done here 😃 love it 😊
@croman38 Жыл бұрын
Awesome video! Couple things: - Steering damper. Bolts on easily and will drastically reduce that dreaded speed wobble. - Street tires. Less rolling resistance and will be a lot smoother and faster. Should be easy to find them in the 10 or 11 inch size. - Higher end scooter such as the Rion RE90. This scooter can hit 120 kmh (75 mph) WITHOUT a jet engine strapped to the back lol. (You should also be able to flash the controller to remove the speed limiter if it has one) - If you get all 3 of those plus your jet engine expertise, you should be able to set the world record for fastest scooter ever! Cos why not!
@quetimporta213 Жыл бұрын
It's an experiment, bro 🙄
@croman38 Жыл бұрын
@@quetimporta213 I realize that. All I wrote are simply suggestions, bro 😅
@quetimporta213 Жыл бұрын
@@croman38 for what? Who cares? Or was pointless. You people
@SaltyCracker402 Жыл бұрын
I have a nanrobot ls7+ and I've seen 62 mph. I'm curious about the controller flashing you mentioned. Do you know any companies that do it or maybe how to do it myself? I have two 50amp controllers in mine
@JokeryEU Жыл бұрын
@@quetimporta213 experiments that come into reality ;) and you can buy one in the future from your car dealer :P . Almost all vehicles that are fast have limiters, to abide by the law and avoid needing specialized permits to make them, as an owner you can remove them since its your product.
@RCTommy Жыл бұрын
Always turn the gas turbine facing into the wind when starting. These mini jet engines don't like starting with a tail wind, and that sputtering wet/hot start you did at 9:52 could have been avoided if you oriented it correctly before starting. Awesome video!
@Sha19769 Жыл бұрын
Big jet engines don't like starting with a tailwind either! 😉
@dannyburleigh1 Жыл бұрын
1 of the great things about the Escooter in general is the fact that it doesn't make any noise and it doesn't pollute! Or use stinky fule!!
@IvanFazekas 9 ай бұрын
10:02 that sound... so nostalgic. I low-key miss the flightline.
@Nycist Жыл бұрын
First time watching, let me say this was amazing. You’re also nuts😂. No way in hell I’d have the balls to take a jet powered scooter I built myself up to 63+ mph without proper protection. Balls of steel bro!🤙
@TheLolpwnz Жыл бұрын
its not balls its another side of that :D
@tolman4tor257 Жыл бұрын
lol that made me laugh :)
@syukriimran1933 Жыл бұрын
You'd explain well what I want to comment.
@madhatten00 Жыл бұрын
it's insane the thing literally caught on fire and he still rode it after
@raginginferno868 Жыл бұрын
@huge asian x petite white faster than u
@markysspotlight2472 Жыл бұрын
Warped Perception ALWAYS delivers! I've never been let down EVER! Love your projects brother you inspire me! 👍👍👍 p.s. the thrust on that thing looks insane lol
@Hitech82 Жыл бұрын
Now that maybe one of the best uses of a mini jet I've ever seen..
@WolfPackYT Жыл бұрын
0:27 cutest little laugh so precious 😊 father of the decade!
@petronioaznar Жыл бұрын
To eliminate the wobble, you need to put one foot on the front, one on the back, and lean as much weight as you can over the handlebar. I do 120kmh (Moyatron) and my mate 146kmh (Rion) and we have no issues.
@WarpedPerception Жыл бұрын
Geezus, that Moyatron goes over 55 mph out of the box, that's insane. I'm going to try that tactic next time
@WarpedPerception Жыл бұрын
Dam man, the Ruin is 80mph, holy hell...that's just too fast for a scooter..
@petronioaznar Жыл бұрын
@@WarpedPerception Yeah the Rion is just nuts, I have tried it and the acceleration is plain scary. It has the same push fron the beginning until the end, even at 120kmh the wheels keep drifting.
@leoncaples2947 Жыл бұрын
Or, you know, just buy a steering damper.
@CoLD.SToRAGE Жыл бұрын
I see maybe you have a camera on the handlebar? That could be causing some of the wobble. Also, your cellphone can measure your speed. 😉
@jasonpoindexter4678 Жыл бұрын
Man I think that thing is awesome. I'm working towards breaking the current world record for the fastest kick scooter. You have inspired me to keep moving forward with my project. It seem that you have much better resources and equipment. The cnc machine and the heli arc are must have to go to the next level. Thank you for the video. I've raced motorcycles and high performance cars my whole life and safety equipment is a must if you continue to press the limits get a set of leathers good boots gloves n Simpson helmet. I've gone down before and the pavement is unforgiven so get the gear or get someone else that has it to do the test ride. We need you in one piece to make bad ass videos that inspire our warped perception s
@samgerland6087 Жыл бұрын
Good luck :D
@TNight00 Жыл бұрын
This is Amazing
@LexyTheEbikeQueen Жыл бұрын
Wow so u can basically build ur own entire powerful electric bike from scratch so freaking talented wow i wish i had talent like u
@cyan2748 Жыл бұрын
Imagine sitting in your house drinking coffee and looking out the window and you see a man on a scooter with a jet engine
@angelespino3563 Жыл бұрын
I know right I was like dam what makes the neighborhood ghetto? Looks nice to me !
@hedgehog1684 Жыл бұрын
when ur running late for work
@interstellarv0id Жыл бұрын
I love that fuel tank idea, I definitely want it on my motorcycle. Seems you can store the same amount of fuel a way more space efficiently than regular tanks. And also it looks like real rocket fuel tanks
@russbilzing5348 Жыл бұрын
On one of my motorized bikes, I utilized a fire extinguisher for the look and because it holds more fuel. Mostly, I just hate those 1/2 gallon tanks that come with every one of the motor kits. They hold back any sense of style and make them all look alike.
@ahaveland Жыл бұрын
Problem I see here with the horizontal cylinders, is that all the fuel runs to the front when braking, so the engine would starve of fuel. There's a reason that motorcycle fuel tanks have the size, shape and location that they have. It's difficult to improve on decades of evolution that have already found optimal forms.
@uploadJ Жыл бұрын
@@ahaveland re: " all the fuel runs to the front when braking" Yes, but a small reservoir could 'cover' for those braking moment events.
@ryanreedgibson Жыл бұрын
Why did this video show up again in my feed? IDK, but still badass! I had to watch it again!
@alanspring8462 5 ай бұрын
Happy to subscribe.❤ Never stop being a kid and always have fun.
@GainingDespair Жыл бұрын
Generally electric engines have a max RPM which they are intended to see. Going above this can damage the engine, I believe to some degree this is what was limiting your speed, resistance in the engine built up while it was on. It was likely trying to speed the scooter up at a slower speed than it was traveling causing resistance due to running far past spec, and acting kinda like motor braking would by downshifting.
@GainingDespair Жыл бұрын
@@alexgivideos1965 Essentially, electric motors work by producing magnetic fields, by switching polarities it causes the shaft to spin. They produce a lot for torque while operating, however there is a max speed which they can switch polarity. Above this the engine is still switching polarity at the max possible speed but the jet motor is forcing the rotor to push past this (some positive, negative, but also some positive, positive, and negative, negative). This wouldn't/shouldn't effect the motor before it reaches its switching speed, but past it, it will cause resistance on the rotor. By turning the electric motor off this problem doesn't occur (to the same degree) if it remains permanently attached at the drive shaft. In fact it should function as alternator while off recharging the battery some.
@harryharding1346 Жыл бұрын
Have you considered looking into the combustion chamber of the turbojet like how you made the see thru engine a while back? love the new video, kept us on our toes lol!
@lennartsix6102 Жыл бұрын
he did already
@harryharding1346 Жыл бұрын
@@lennartsix6102 Really? can you direct me to it cuz I would love to see how it works. Thanks!
@leoortez8856 Жыл бұрын
Incredible!
Praendy
Рет қаралды 319 М.
Влад Закроев
Рет қаралды 2,3 МЛН