Here are some of the tools that jimthecarguy uses www.amazon.com... hange The Cabin Filter ? I Can't Even See It !!!!! In This Video I Will Show You Step By Step How To Replace The Cabin Filter.
Пікірлер: 149
@3windy1city27 жыл бұрын
Honestly. This should be the standard of how every video showing how to do something should be done. Great work!
@C_HILL_OUT3 жыл бұрын
I don’t know what Ford was thinking making it this involved and difficult to change a cabin air filter. Apparently they have too many engineers designing this stuff and not enough mechanics telling them they’re idiots for over engineering what should be simple.
@darrenhall79904 жыл бұрын
I just changed it at 96,271.5. Oil and air filter changes always changed on time or before. My wife said her A/C wasn't getting cold anymore. It has a 100k warranty. If they saw the cabin filter the way it was, they would tell me to take a hike. Thank you for the video. It took 20 minutes and blows cold now.
@xKmotx8 жыл бұрын
Thank you for showing this. Now I gotta say "un-freaking believable, Ford!!" What a pain in the arse for a stoopid cabin filter!
@jimthecarguy8 жыл бұрын
+xKmotx Yea they are not easy
@dustoff4998 жыл бұрын
One would think they could further design it to simply unlatch a door inside the glove box and replace it through the glove box. I believe what we are seeing is a dealer requested design - one that allows them to stick it to the customer.
@jimthecarguy8 жыл бұрын
Oh yea the dealer just loves to screw with us.Lol
@alexeizavjalov88897 жыл бұрын
It took me 1 minute to replace it on my Honda Civic and Toyota Camry and I didn't use any instrument. Why Ford engineers has made it so complicated? I own Ford Fusion Energi and the recent problem was the battery got drained. Can you believe they put battery to the trunk which can be opened only when car is powered on! But anyway, thanks for sharing this video. It is very helpful!
@jimthecarguy7 жыл бұрын
Thank you for watching
@SuperTom15017 жыл бұрын
Thank you for this informative video. I was able to perform this replacement and saved $50 vs. what the shop wanted. It does surprise me that these manufacturers make simple repairs and maintenance items like this, overly complicated where you have to torque yourself into painful positions under the dash to change out a filter. But I would not have been able to do this repair, with your great video. Thank you!!
@kato2233 жыл бұрын
Hmmm, 33 downvotes for a video that is super informative and to the point. Are people jealous that you had the correct way of replacing the cabin air filter? I think your instructions are to the point and very easy to follow! Thank you!
@puravida826 жыл бұрын
Tip: careful when pulling back those clips when removing the glove compartment, I was too rough with it and broke one off. It still seems secure with screws though. Thank you so much for this clear video. I NEVER work on cars, and your video made the process much less painful.
@zzman53064 жыл бұрын
Me too....:(
@ryanclark2645 Жыл бұрын
Me too 😂
@timstevenson70409 ай бұрын
Read this too late. 🤣
@alstar55478 жыл бұрын
You were right the first time Jim.. What a pain in the ass..!! :-D
@jimthecarguy8 жыл бұрын
+Al Star Ya sometime they really are.
@mikebrazeau44776 жыл бұрын
As a high school teacher, I appreciate anyone with knowledge that can explain/demonstrate it in a way that most everyone can understand. You, my friend, were an excellent teacher in this video. Thank you for making the job easy!
@waynek9212 жыл бұрын
Thank you Jim for showing me the way for my filter replacement on my Ford fusion.... watch your channel all the time. Keep up the great work.
@Calvan42 Жыл бұрын
Good word of advice for replacing your air filter or anything with those tabs. Wait till it's summertime or use a heated garage if you can, winter makes all those plastic parts super brittle and makes it easier for them to break. You might be sweating a lot while doing it, but it's worth saving yourself any risky breaks or replacements. This was so helpful, all I needed to buy was a single tool and an air filter. Got me a carbon air filter cause I live in Montana and we get a lot of smoke from neighboring fires from Canada, Washington, Oregon, and California. I recommend everyone get that kind of filter too, don't go cheap, go with the best, it will really help to filter just about anything and keep the air in your vehicle clean and refreshing. I'm gonna change mine again in a year.
@jimthecarguy Жыл бұрын
Thanks for watching and your input
@dustoff4998 жыл бұрын
Yep! Royal Pain in the A*s. Can be done exactly as described but be aware there are those tiny pinch clips (white clips as seen in the video) that may come off in this - oh so lovely - process. Thanks for posting this.
@MrPsalms2072 ай бұрын
Changed my blower motor and my cabin air filter in my 2014 Ford Fusion Energi SE today. Tell me why changing THIS cabin air filter is SO complicated compared to the 10 or so other vehicles I've had over the years (this is my 1st Ford). The cabin air filter (which is like a 2-3 minute job on other vehicles) literally took longer than changing my blower motor! C'mon, Ford! They really trying to make you go to the dealership for even "simple" DIY jobs! 😒🙄🤦🏾♂️ Anyway, great video! Thank you, Sir! 🤙🏾
@lewismatthewj7 жыл бұрын
Thanks, Ford wanted to do this and I was like "No, I'll just do it", then I realized it wasn't as simple as my own cars or trucks. However, it was pretty easy. I do recommend putting tape on your flat head to avoid really damaging the end panel. I saw this in other Ford tutorials and it worked out pretty well.
@jimthecarguy7 жыл бұрын
SergeantLu great advice thank you
@daboys664 жыл бұрын
Best version I’ve seen for this replacement!! Thanks!!
@gerryhohler40407 жыл бұрын
Thank You Thank You.....a mouse built a nest with babies on top of the cabin air filter of our 2015 Ford Fusion and then DIED. The smell was unbearable! Ford dealer wanted $200 to $300 plus parts to remove mice. With you video I did it myself in about 1 hour. Again THANKS
@sebol55672 жыл бұрын
This video was very helpful. I am not very good with diy projects for my car but this saved me $115 doing itmy self. Naturally ford makes it seem difficult so you take the car to them, but no need if you follow this video. Thanks for posting it.
@jimthecarguy2 жыл бұрын
Glad it helped
@josephdickerson36707 жыл бұрын
Thanks for the video, Jim. It was simple to follow, and saved me about $60 (minus the cost of the filter)!
@joshuaboever25382 жыл бұрын
Thank you for the informative how to video! I have a '14 with 150,000 miles. I came across your video and went huh? Maybe I should change mine out! Come to find out that two mice made it in there at some point of the cars life and decided pass away. The A/C now feels like Minnesota in January. Note: if any debris fall down past the filter just take a vacuum hose and tape some smaller tubing on the end. You can then feed the tubing down in the blower area to clean it out. I had an acorn fall down unknowingly and made a bad noise once everything was back together. The tubing did the trick to grab it out without further disassembly.
@Bealsie.Boi.713 Жыл бұрын
Thanks for the video. Very helpful. This makes me appreciate my wife’s Toyota, so much easier and less screws.
@hereitbe5 жыл бұрын
Nice illustration Jim. I just completed mine exactly as you have shown. Thanks! Wow, my filter was dirty.
@jimthecarguy5 жыл бұрын
Thank you for watching.I'm happy to help.
@MuRdaaU4 жыл бұрын
Great job, saved me hours and not damaging anything else in the process.
@artlego10073 жыл бұрын
Jim thank you for the video. It seems that the screws on the cabin air filter was already missing. Also, I find it annoying that car manufactures can't make cabin air filter more easily accessible through the glove compartment.
@douglasweigle30415 жыл бұрын
This is great. Keep up the good work. Thanks!
@faiztender35016 жыл бұрын
Thanks for the video. Can I know where is the fuel filter location?
@raceabilene6 жыл бұрын
Well done, thanks. Took more time to science out how to safely lift the car with my 2 post for an oil change than to replace the cabin filter.
@FireDude132 жыл бұрын
First off... good thing this isn't complicated or anything. Who the hell designed this cluster****??? Wow... pain in the ass is right! Second... THANK YOU! I never would have figured this out even with directions. Very well done with just the right amount of detail. When the video first started I thought oh... this won't be bad. Looks like we are just dropping the glovebox out of the way like on my '17 F-450 (a couple of tab releases drops the glovebox out of the way). Wrong... lol! This doesn't look overly difficult, just unnecessarily complicated...
@MoMo-uj8rd2 жыл бұрын
Thanks. I appreciate the video. Great step by step, no surprises. Nice work.
@edwardlimney51317 жыл бұрын
Im saving $117.00 with this video! Thanks for posting👍
@jimthecarguy7 жыл бұрын
Thank you for stopping by the shop
@curtisstewart21906 жыл бұрын
So is changing the filter in a 2015 done the same way? I have a 2015 fusion.
@jeffvanover8426 Жыл бұрын
Very nice. Would a dirty cabin filter prevent the fan motor from working correctly? I have not changed the cabin filter yet but will very soon. 2014 Fusion that I bought in 2018. 100,000 now. Filter could have been changed prior to me owning.
@JR-playlists3 жыл бұрын
Thanks Jim. The only thing missing was the amazon affiliate link to the filter!
@gstrickland5604 жыл бұрын
Thank you! My only problem following your guide was that whomever replaced the filter last didn't put some of the screws back in so I wasted time trying to find them :)
@deeoday44513 жыл бұрын
Thanks Jim. I have the left bottom screw left. I think I wait till tomorrow. I have aches and pains that have to heal.
@gnohn93663 жыл бұрын
Simple job. Just took a few minutes. Thanks for the video instructions.
@jimthecarguy3 жыл бұрын
Glad it helped
@mrlube14197 жыл бұрын
Thankyou and keep it up in posting good videos.
@michaelnelson29513 жыл бұрын
Excellent, just one thing if you have the 4 glove box screws are out you might have to tug on the glove box.
@williambowman7037 Жыл бұрын
I noticed a filter behind the right windshield wiper motor in my Fusion (2014) as well, what is that one for?
@jdrush46066 жыл бұрын
Nice video Jim. Thanks for taking the time to shoot it.
@corytate12394 ай бұрын
I have black trim covering the screw I need to get to down low The socket won't get it head on because the trim is in the way
@yosephadmasse16954 жыл бұрын
Thank you
@darillest3565 жыл бұрын
This is great. I have 2014 fusion I bought used with 18k miles. Now has 32k miles. Can I just suck the leaves from under the windshield wiper?
@InTheDogHouse3DPrinting5 жыл бұрын
Yes you can.
@ridecaptainride24323 жыл бұрын
This video nails it...Great Job!
@jimthecarguy3 жыл бұрын
Thank you! Cheers!
@elmecanico49432 жыл бұрын
How to replace cabin on this car: first, tear half of the engine apart.. Then...😂😂
@armandoarredondo84257 жыл бұрын
Thank you... Very informative :)
@jimthecarguy7 жыл бұрын
Thanks for stopping by
@zzman53064 жыл бұрын
Can you do one on how to replace the fuel filter those years of Fusions?
@jimthecarguy4 жыл бұрын
Will do. Thanks for watching.
@bobdubrow36737 жыл бұрын
Thank you very much, very thorough video. Definitely going to give this a go myself.
@jimthecarguy7 жыл бұрын
great keep me posted how you do.
@macster14577 жыл бұрын
Hi Jim.. my fusion wipers sometimes won't come down all the way after I turned them off.. they stop about 1 inch from the bottom.. so the next time I put they key in the ignition and turn it ON, the wipers then will go down were they're supposed to... Ford already replaced the wiper motor and calibrated the wipers, so they told me there's nothing else they can do because there is no code.. any ideas?
@Banko7514 жыл бұрын
My fan went out, if the cabin filter is clogged will that effect the blower?
@InTheDogHouse3DPrinting5 жыл бұрын
So what happens to all of the extra debris that falls down into the blower housing after you take the filter out?
@LyleLovinit4 жыл бұрын
Glad Ford made it easy to get at.
@zzman53064 жыл бұрын
Do you know if any special procedures are needed to flush the brake fluid on a 2014 Fusion?
@jimthecarguy4 жыл бұрын
Nothing special the same as usual. Thanks for watching.
@ryanclark2645 Жыл бұрын
Great video! Thanks!!
@jimthecarguy Жыл бұрын
Glad you liked it!
@ryanclark2645 Жыл бұрын
@@jimthecarguy for some reason I couldn’t get my filter cover to close back up, so I left it slightly open. Do you think that matters ?
@jasonwalkinshaw20735 жыл бұрын
Perfect walkthrough...thank you
@jimthecarguy5 жыл бұрын
I'm happy to help. Thanks for watching
@albertflores14746 жыл бұрын
Thank you for this video,it was very helpful 👍👍👍👍
@papab20103 жыл бұрын
Great video, thanks. Perfect!! Worked great@!
@cliffordgallagher45314 жыл бұрын
Was it a Titanium edition?
@dliontis5 жыл бұрын
What a pain in the ass, I mean pain in the butt. Awesome vid and helping show how to replace. Thanks a million
@jimthecarguy5 жыл бұрын
I'm happy to help. Thanks for watching.
@timstevenson70409 ай бұрын
Thanks!
@bruceelfstrom27253 жыл бұрын
Who thought this was a good design for the car? I mean seriously, all that just to replace an air filter???
@zyadalharbi44667 жыл бұрын
thank you
@deanopants7 жыл бұрын
Thank you! Helpful video.
@RICKAFIX8 жыл бұрын
couple more screws and you probably could of changed the heater core lol nice video Jim
@jimthecarguy8 жыл бұрын
+RICKAFIX It's amazing the sh-t you need to do for such and easy repair :-) How's everything going for you? Keeping busy?
@RICKAFIX8 жыл бұрын
+jimthecarguy I went back to chicago for 4 months and I just came back down to Florida for a month and then off to Scottsdale for a couple of months... I am all over the place in my 2000 Tahoe 230k miles and the truck running great lol
@jimthecarguy8 жыл бұрын
+RICKAFIX Wow you really get around your all over the states..230k miles you must take good care of it to get that many miles.
@johnsavignano2339 Жыл бұрын
Was easy,except for my glasses focusing was harder.
@johnnyredcloud62357 жыл бұрын
All 4 of the bolts are 7mm right?
@InTheDogHouse3DPrinting5 жыл бұрын
Yes, they 4 bolts are all 7MM
@LCCJ823 жыл бұрын
Great Video. Thank you!
@jimthecarguy3 жыл бұрын
Glad you enjoyed it!
@woodyglendell74007 жыл бұрын
I-am-impressed.
@aaronsliwinski49896 жыл бұрын
What if debris from top of filter possibly fall in? How can I get in to clean it?
@jimthecarguy6 жыл бұрын
Aaron Sliwinski They only thing to do is use a shop vac.
@ot76946 жыл бұрын
Is that what causes it to give a abnormal odor when using the AC
@zzman53064 жыл бұрын
Could be. Or mold/mildew in the ducts.
@musictioficial82737 жыл бұрын
Simple dumb question. does the arrows go looking down? i have also a 2014 ford fusion SE
@jimthecarguy7 жыл бұрын
Musicti oficial there is no such thing as a dumb question the arrow faces the direction that the air will flow brown toward the blower motor
@mannycarrizales_realtor4 жыл бұрын
@@jimthecarguy So that is "Arrows down" right? Same car, Model, Year.
@squee2224 жыл бұрын
Thanks. Great video
@jimthecarguy4 жыл бұрын
Glad you liked it!
@cranbers6 жыл бұрын
I changed out the filter on a Toyota Sienna, you open the glove box. There is a plastic cover in the back, two tabs, pull out the plastic piece, pull out the filter, put the new one in. Put the plastic cover back in place, and done... I looked in the glove box of my 2017 Ford fusion energi platnium, and said WTF is this Sh!t!... to youtube we go, now I see its going to be a bit more of a process....
@jimthecarguy6 жыл бұрын
Some are very easy and then there is the Ford.I think the engineers are just screwing with us .Lol
@IamCarrieNotBranshaw6 жыл бұрын
I had a Chevy Cobalt and it took me no more then 15 mins to complete this. When it time to get my cabin filter fix, I;m paying someone else to handle this one. lol
@normansmith78068 жыл бұрын
One of those better ideas from Ford :)
@jimthecarguy8 жыл бұрын
+N Smith Ya they have the best ideas:)
@zzman53064 жыл бұрын
Engineers weren't thinking simple here.
@jimthecarguy4 жыл бұрын
Thanks for watching.
@esaumoreno74057 жыл бұрын
can u make a video of how to replace the headlight bulbs
@jimthecarguy7 жыл бұрын
As soon as one come into the shop I will.
@michaelostrofsky62897 жыл бұрын
Very well done.
@jimthecarguy7 жыл бұрын
Thank you for your feedback
@anthonyperkins8961 Жыл бұрын
That’s it? So many chances to do damage and lose hardware for a simple cabin filter
@pxods5 жыл бұрын
And you said it was pretty easy! Hahahahaha
@jimthecarguy5 жыл бұрын
Thanks for watching. I hope i was helpful.
@StewartMotoring6 жыл бұрын
Thanks good video
@DigitalMentorGroup3 жыл бұрын
I have a 2013 Fusion, and had I'd known this beforehand, A. I wouldn't have bought the car, as Toyota has àmuch simpler system that doesn't require this much disassembly. How to make something that should be simple, as complicated and difficult as possible, is a sign of poor design.
@rzak19615 жыл бұрын
Many thanks !
@jimthecarguy5 жыл бұрын
I'm happy to help. Thanks for watching. Don't forget to hit the bell for notifications when a new video is posted.
@reg-tekhughes2516 жыл бұрын
Awesome, thank you!
@jimthecarguy6 жыл бұрын
Reg-Tek Hughes Thanks for watching my video.
@patrioticimmigrant88175 жыл бұрын
Thank you sir.
@jimthecarguy5 жыл бұрын
Thank you for watching . I'm happy to help. Don't forget to subscribe.
@SteveRobReviews8 жыл бұрын
Hey Jim I would have never found it LOL
@jimthecarguy8 жыл бұрын
+Steve Rob Ha Steve I had to put on my glasses to do this one .Lol
@swelldrew4 жыл бұрын
Thank you sir
@jimthecarguy4 жыл бұрын
All the best.Thanks for watching.
@Banko7514 жыл бұрын
Btw great video!
@russsmith30784 жыл бұрын
This is horribly misleading. Replacing that bottom screw on the left where you cannot see the hole is torture. It took me hours to get it back in there.
@jimthecarguy4 жыл бұрын
I don't understand "horribly misleading" what does that mean?
@1dlb5 жыл бұрын
great video - thanks so much .... Ford can fawk off - lmao
@mmmodafoca3 жыл бұрын
what a fucking mess... First time im proud i drive a hyundai... I'm only looking this up cause it's my mother's vehicle that needs the changing. in my hyundai all i have to do to access the filter is remove the 2 clips that holds the entire glove box basket down revealing the entrance in the back of the filter.. easy.. wtf ford??
@billycontinental18492 жыл бұрын
What a terrible design! The 2010 Fusion just drop the glove box down and access the panel. The engineers got stupider.
@jesushatesyoutoo5 жыл бұрын
How many fucking screws do you need?
@kerns05jk6 жыл бұрын
I'm not familiar with it being easy in any vehicle not just ford
@jimthecarguy6 жыл бұрын
Thank you for watching
@anthonyperkins8961 Жыл бұрын
Honda is so much easier
@sirwentworth77634 жыл бұрын
Can Ford find a more difficult place to install this crap!!