Thank you. Its a good starter rc as it comes complete with everything a newbie needs. Thx for watching👍🙂

Thx pal 🙂👍

Thx dude!!👍🙂

Thx bro👍 sounds good. I will check it out!

The weather hasn't been good in the UK. Once it gets better I do intend to do some running vids. Thx for watching and thx for your support! 👍 stay tuned!

Thx for the support dude!👍Hope you get out bashing soon🙂

Yeah hopefully, I'm after a metal gear box cover, I've only seen bangood have them...but their out of stock! So I ordered two plastic ones instead. What charger do you recommend?? I have an S2/S3 charger...takes all day to charge two S3 batteries!

@@mikeb3315 I use an overlander rc-d100. It's a twin port charger as I also use it for my 8s rigs. Ive had it for around a year. Its been good so far...🙂

@@inspiredrc cool, thanks. I'll look into that soon 👍🏽. I've got to wait a few weeks for the parts to get here now! I'm taking the j3 apart cleaning and spray painting some bits. And make it bash proof with cable ties 👌🏼

@@mikeb3315 I spray my plastics with wd40 after cleaning. Not sure if it helps but it does make it look like new again.

👊👍

@@inspiredrc sir can i use nimh batteries for This car? how many NiMH batteries need for this car ? Have you any idea? . Getting average performance. Not need same as lipo performance. actually i am afraid about this lipo battery . Lipo needs to maintain property .

@@soumiksaha720 hi. To get closer to the speed advertised you need a 4s battery (4 cell) around 50c discharge or higher. The car comes with a free 3s battery hence why its slow out of the box.

Thx for watching. Its completely upto you. You can either put thread lock on and be done with it. Or check the nuts before every bash. Once I used thread lock I didn't have any issues with nuts comming loose. If you can its well worth doing and it is a must have item for your rc tool kit.👍🙂

@@inspiredrc txs so much for your time and response, happy new year.

Hi. Yes they have been good for me. They are flexible. The front post are approx 72mm apart and the rear post are approx 40mm apart. Where the attach to the shock towers the screw holes are both 20mm apart front and rear. Hope this helps.

Thx dude!! I haven't checked but will do thx.👍🙂

@@inspiredrc waiting for new videos!

@@Full-master yeah I intend to but been busy with work and weather hasn't been good on my days off. Hopefully soon.

I replaced the washers with the a proper spring about a year ago. Undoing the nut was a NIGTHMARE, imposible without a vice. I think the spring came from a Bison, perfect fit. Worked as intendet for 9 months, then all of the sudden the clutch started to spinover. Somehow the nut got lose. Tryed to tighten it but it didnt hold, so i used Locktite. Worked as intendet until i started to hear a ratling/grinding sound coming from the spurgear. Took it out and the shaft was BEND, the spurgear was grinding against the aluminum bottom. Replaced the Spurgear with a new one, without installing the spring. Works like a charm.

if the electronics could be replaced by quality brands like velineon, mabuchi, hobbywing, I think it would look great!

@@zoridor16 the stock electronics have been ok. You do need a fan on the motor to keep it cool. Battery has lasted a year just started balloing. Still works fine. The hobbywing max10 combo is a good replacement if required. Servo has been good 👍

I tend to goto ebay or banggood for my spares. Ebay is usually more expensive but you don't have to wait as long for the delivery. Hope this helps.

I dont have yhe link since its been a while since I purchased them. Just search the following on ebay uk: ZD Racing 150mm Wheel Rim and Tires for RC 1/8. These go straight onto the car. No need to do anything. Hope this helps 🙂. 👍

Hi 👋 I think these are the same inside. I only have experience with the j3. Its been good for me as long as you do the free mods. If your looking at the extreme version then it looks more durable with a wider chassis plate and a stronger front bumper but i would get rid of the single wheelie bar and put a wider twin wheelie bar on and l I like the heavy duty wheels it comes with. No need to change them. I hope this helps 🙂.

Yeah no problem. If your on Instagram then message me. @inspired_rc I will try to help.

Awesome thank you man! I added you and sent a video

Hi. I've had no issues with using the larger wheels. The drivetrain is able to handle them fine.

Hot glue on your wheels will off set it buddy will corse wobble. Good thinking though. ✌🏻

Thx pal👍I didn't think of that. I will try it.

Inspired RC it’s easy. Make shore throttle trim is centered. Good that little button on esc down till it flashes. Then let go have neutral position then press it agin Full throttle press it agin Full reverse press it agin. Turn it off. Jobs a good en lol. While your messing about with the esc. I’d program it to. Turn your lipo cut off up. It’s set at factory to 3,0. That’s dangerously low. Go below 3.0 and it will kill your battery. I put mine to 3,4, good video keep it up buddy. Sub 👍🏻

It’s only on 5 punch as well if you haven’t turned it up. Goes to 9.!! Enjoy.

Thx pal . This is wat I love about this hobby. There is always something new to learn. I must admit. I haven't tried reprogramming the esc yet. Thx so much for your support! Much appreciated. 👊👍

Excellent buddy! They look awsome...make sure you put blue lock tight on the wheel nuts.....👍

@@inspiredrc i do

@@parkourrush3820 i lost a nut on my first run with these wheels🙁 they have been good for me since...👍

@@inspiredrc thats unfair.

Hi. I will check and get back to you soon.

@@inspiredrc that would be great, the stock screw is M5 with 85mm length. I found two M5 screws but with 60mm length, and even after looking didn't found much longer screws, maybe you used like M6 and made larger hole to the existing wheelies?

@@thebestdjhits is it the threaded bar I used for the wheelie bar your asking about?

@@inspiredrc yes i saw you have two long screws with bolts, i ask what kind of screw/bolt combination you used

@@thebestdjhits its actually one length of i think 10mm threaded bar. I used 8 x 10mm nuts to keep everything in place. I'm gona double check the width of the bar for you. It was something I had lying around so didn't purchase especially for the job.

Hi. I haven't looked at fan for my motor but you can search online. You just need to know the width of the motor. I suspect it is around 44mm but not sure as I don't have access to my jlb at the moment.

I just turned it down on the remote.

@@inspiredrc Thanks I thought was something to do directly with ESC. what about the breaking power? also from remote?

@@davidrc6258 I haven't altered the break strength yet. I guess that will be done via reprogramming the esc.

They have been good. I did add some hot glue to make them stronger. Look really good aswell.

Hi I'm not sure as I only own the j3. I can say the j3 is a rocket. I expect if its got the same electronics then there shouldn't be much difference.👍

Thx pal. I will check it out!

Hi. You need to calibrate the remote to the esc to rectify this issue. The instructions are in the user manual.

@@inspiredrc I read the instructions and the blue light still wouldn't blink, but some how I got it to work. I think that this car is to much for me. Thank You