Thanks. Hmm, I never hat overheating issues. I assume, your ESC did not like the conformal coating. I also had this issue in a different vehicle. However, if you push it hard, the battery will be exhausted after 10 min anyway. Are you sure, it is thermal related?

@@TheDIYGuy999 don't think is the conformal coating ( is Sylicone, not acrylic). Didn't cover the transistors and i've used a quality thermal pad for the radiator. The motor is getting hot, can't touch it at all. Checked the pinion and mesh gear, there is play between them, so it is not tight. Ordered a radiator and fan for the motor, i will see if it will overheat again. Thank you for your quick answer!

Thank you

Bad luck. I never broke one so far, bur many of other parts

Super glued and hot glued the cracked tie rod end link lol still holding up a few runs later... have metal tie rod end links coming in mail

On a drift car, yes. But not on a monster truck

Wrong! They are all out of whack! You want them pretty straight. A little toe in on the rear is good but I also try to line mine up nice and straight.

You're welcome

thanks, I appreciate it

Good first inspection and setup. I've got my cheetah one week ago and i've coated the Esc and receiver with Sylicone Conformal Coating. My only problem, it keeps overheating the Motor, after 10 min drive it just stops. Also it drains the batteries really quick( 15min 3S, 5500mha drive). Don't think the two layers of coating is causing any issues, the mesh gears are aligned properly. Don't know at what else to look to fix the overheating

Thanks

You probably dont care but does anybody know a tool to log back into an instagram account?? I somehow forgot the account password. I would appreciate any assistance you can give me!

@Maxim Reed Instablaster :)

@Kristopher Briggs thanks for your reply. I found the site thru google and Im trying it out atm. Takes quite some time so I will reply here later when my account password hopefully is recovered.

@Kristopher Briggs it worked and I finally got access to my account again. I'm so happy! Thank you so much you saved my ass !

I don't have the bison. The weakest point of the Cheetah is its brittle differential gears.

which u used for steering link

Thanks. It's a 3mm Allen key (hex key). The wheel nut is 17mm

Yes, I think I did, because I wanted to make the suspension a bit softer.

Ok cool thanks for the reply. I’ll try it on my Cheetah. Do you still have it and drive it? I’m really enjoying mine I think it’s an awesome car for the price.

Your slipper clutch may be too loose

Need moar powaaahhh. Try a biger voltage battery or adjust punch settings if available.

Adjust the punch level tank. Also try to use a 50c+ battery. That will do it for ya!