I Don't Normally Like Wooden Gates.... But....
Рет қаралды 6,258
2 ай бұрынWooden gates are tough. Wooden double gates are a whole different story. There's a reason my company builds steel frame gates almost exclusively. Today we're checking out a wooden double gate build. Will this double gate hold up? Let's dig into to find out!
► See the Best Fence Fittings from Nationwide Industries - thefenceexpert.org/NWI
► Check Out Ryan Rutter's Original Video Here - • How to Build a Wooden ...
► Click Here To Subscribe - / joeeverest
► Click Here For More Reactions - • Expert Fence Builder R...
► Click Here To Save On Fencing Supplies - thefenceexpert.org/Materials
I'm Joe Everest, The Fence Expert. On this channel, I'm going to teach you everything there is to know about fences. We're going to show you how to build a fence, everything about fence posts, different fence installation methods and much, much more. If you're wanting to become a fence builder, or if you're just trying to build a DIY fence, my channel will help you out. So subscribe and ring the bell icon, that way you don't miss any of my fence videos!
► Check Out My Social Media:
Email - joe@thefenceexpert.show
KZfaq - / joeeverest
Facebook - / therealjoeeverest
LinkedIn - / joeeverest
Online Store - www.ozfence.store
► Gear I Use:
Coolest Clock Ever - amzn.to/3owMHqC
Main camera - amzn.to/37MIqbA
Lens for main and Second cameras - amzn.to/3gmmtnK
Second camera - amzn.to/2JAvOfW
My microphone - amzn.to/3oAFkyr
Sound Mixing Board - amzn.to/2LibU9V
Wireless Lav Mic - amzn.to/2Ip1hAV
Tripod to hold our camera - amzn.to/37INaz5
Our studio lights - amzn.to/3lQP9X3
*NOTE: This description contains affiliate links that allow you to find the items mentioned in this video and support the channel at NO COST TO YOU. While this channel may earn minimal sums when the viewer uses the links, the viewer is in NO WAY obligated to use these links. Thank you for your support!
@ppomm 2 ай бұрын
I like building my double gates as one unit -- then once all level and hinges bolted solid I use sawzall to cut it into two units. I most always work alone and it seems to work for me. I do approve of the half lap but I use a bit less glue ;). I will through bolt the strap hinge onto the gate with 1/4" carriage bolts to lock it and the lap joint together. I think this guy did a good job .. but those are two BIG gates and I bet it will need adjustments within a few years. Love your objective assessments of these videos Joe!
@vigilantezack Ай бұрын
I built a 16 foot gate with two ~8' sections like this. Half lap with more than one crossmember. The pickets make the structure of the gate super solid, they don't rack by any means, but even with my 6x8 monster posts in concrete, they still had enough weight to pull the posts inward a pinch, throwing off alignments. The only way I can think to fix that is use some kind of tension wire and attach to the post and pull it backward to help hold the weight. For example attaching the wire to the base of the next fence post to about 5 foot up on the gate post. And/or add a wheel system to the gate to reduce the weight and keep the gate level. I kind of wish I had the time and money to build this as a steel gate on a pipe/wheel system so it slides instead of opens like a door. A sliding gate at this size makes more sense.
@katimius 2 ай бұрын
Started watching your vid. Husband came up and was like, "Are you tryna build a fence? Our fence is fine..." Tell him I just wanted some knowledge. He then explains how the fence along the south side of the house needs to be rebuilt. So yeah, I guess I AM (more like, HE IS) building a fence. 🤷♀ Thx for the knowledge!
@duanedodson1 2 ай бұрын
It is one of the better ways to build a wood frame gate that I have seen.
@TheWizEdFromAus 2 ай бұрын
As a fencer we would only ever build frames out of galvanised steel or aluminium depending on the cladding material steel typically for timber and steel fences Ali for mostly aluminium fences. We have never built timber frame gates and likely never will as the amount of possible movement in the material over time for something that needs to be very rigid to us means it's simply the wrong choice. For the minor price difference here in Australia as our timber is very expensive, it's just not worth considering.
@bobbygetsbanned6049 2 ай бұрын
2:28 If you're going to make cuts like on a table saw use a miter gauge, don't free hand it.
@starfox1340 2 ай бұрын
I would give his gate 👍 I over build the hell out of my gates , but I used 4-5 bags of 80lb concrete on my post lol
@alvinjleb Ай бұрын
I have heard that building a gate that wide will cause issues as the cross brace angle past the 45 degree angle. believe adding another vertical support in the middle and add 2 diag support in between each new box will fix this issue.
@Gerberous 2 ай бұрын
Lot of overkill in places that don’t need it and underkill in places that do
@saveadog64 2 ай бұрын
I have a question, if you were gonna fence in an acre or so that has uneven ground in some areas, what would you use? I volunteer fulltime at a small non profit dog rescue, we're in the process of looking into fencing the property that we lease so that we can have open areas for dogs to run in, it'd be a perimeter fence with fenced off areas inside of it. Edit: We are on the northern california coast near oregon.
@jon131 2 ай бұрын
I'm curious if the wood will warp when it gets rained on.
@motocache6645 2 ай бұрын
Would it be okay to set each post with 1 bag of quickcrete and then come back the next day and fill the remainder of the hole with regular concrete.
@Bernard-lw7qd 2 ай бұрын
I have done tons of fence and can tell you that wet setting is the best way to set your fence. Make sure your mixture doesn't have toob much water. It only takes one bag, if you mix it with hammer drill on speed 1 in 5 gallon bucket it takes less than 30 seconds to mix. If doing by yourself, half bag at a time. Lightly pack with 10-20 pounds of force then as much as you can on last pack. Dry set only advantage is that it saves fencer time. Quickrete and concrete are the same thing. There are different forms but they are the same thing. You can also set posts with no concrete just don't do it on gate posts.
@willcunningham8818 29 күн бұрын
Good god he isn’t scared of kickback. Freehand cutting on a table saw is wild. One cut is one thing but all the cuts you have to make for a half lap… Why not just use a miter gauge?
@ajdonally1522 2 ай бұрын
I buy a gate kit from the lumber yard. It's made of steel and install 2x4 this kit is good for a gate upto 48in . Works goodm haven't had any call backs
@duanedodson1 2 ай бұрын
They are kind of ugly, but I guess, that is an opinion.
@ajdonally1522 2 ай бұрын
@@duanedodson1 board both sides if you like..I've done that for a couple clients.
@ajdonally1522 Ай бұрын
@@duanedodson1 you board both sides and or looks fine
@duanedodson1 Ай бұрын
@@ajdonally1522 Fair enough.
@shrimpinpat 2 ай бұрын
House I bought had gates like this and they are all twisted
@MrMasterChrisXbox 2 ай бұрын
This gate is going to twist in no time, building the gate frames to be 3 1/2 in depth will serve you much better
@bobbygetsbanned6049 2 ай бұрын
2X4's have no span in that direction, it will sag like crazy if you build it like that.
@MrMasterChrisXbox 2 ай бұрын
@@bobbygetsbanned6049 with the proper bracing via a cross brace I’ve never had one fail. It’s always a repair service call on another installers job that installed one like this and it’s bowed so bad their pet can run right out the bottom even when latched
@Mergazoid 2 ай бұрын
Just use galvanised steel tubing, do it right and do it once. Many gates I have built are getting on the 25 - 30 year mark and they are still perfectly strong and square.