Yamasa Pink Panther Slot Machine Repair - The reel stop buttons don't work FIXED!

Рет қаралды 9,876

4 жыл бұрын

How to replace a capacitor on your yamasa or pachislo slot machine and fix the reel stop buttons. Capacitor is a 1uf 50v radial dipped capacitor fuse is 1 amp 125/250v.

Пікірлер: 43

@1224yari 7 ай бұрын

I got pretty much similar machine and same problem. I just wanna say good work and thank you a lot save me a lot of time.

@bigshow5173 5 ай бұрын

Get a new soldering iron tip. Get a few sizes too. Then get some tip tinner to prep the new tips. You will find your solding will improve with the correct equipment

@pullinforthechildren2103 2 жыл бұрын

Just picked up dang near the same machine with the same exact problem. Hope you saved me a tone of time troubleshooting thanks

@mav6983 6 ай бұрын

I had the same issue on my Diver type a machine. The inside looked identical to your machine, so I checked the capacitor and it was blown. You save me a ton of headache, thanks a lot man!

@bobbymiller8563 8 ай бұрын

Joel , i just pick up a used Japanese slot machine. I fixed a few issues on this slot machine. The last issue is the wheels didn’t not stop by hitting the buttons. I checked exactly what you did. My fuse was blown and the capacitor C10 was bad too. I ordered the 1uf 50v capacitors and fuses from Amazon. Thank you for the help. You saved me a lot of money.

@bobbymiller8563 8 ай бұрын

Great job. I have a Japanese slot machine with the same issue. I will have to check that capacitor on that board now. Thanks for the help.

@jonathanstieg4309 Жыл бұрын

Thanks a ton,I'm having the same issue.you Rock bro

@ackerapple608 11 ай бұрын

Yooooooooooo, I love you. I’m not in love with you but I do love your soul. My machine had the same exact problem and I got my tester out and compared and sure enough I just had to replace that same cap. You’re a beautiful soul for taking the time to film the steps. I’m dealing with the speaker buzzing now if you have any tips (it’s grounded)

@colinmann3480 2 ай бұрын

That so good to see it working again, now you just have to get it to use real money, so you can paly & save up money at the same time.

@milktruk 2 жыл бұрын

Good catch

@Radioman56-3 11 ай бұрын

I replace C10 capacitor in my super bunny slot machine. Stop buttons all worked for a little while now to work but one does it what could be the problem?.

@Lovenpain 11 ай бұрын

I have the Taco Slot(octopus) just got it from a friend for $100. Got it all to work but the stop buttons. They light up but do nothing. I saw the fuse blown on the stop board. Im hoping with your fix i might can get mine to work.

@frankcabrera6319 5 ай бұрын

What was the issue with ur machine

@Lovenpain 5 ай бұрын

@@frankcabrera6319 I replaced that resistor and it worked!!

@Radioman56-3 Жыл бұрын

Super bunny slot machine do you think I could have the same.. my capacitor could be bad my push buttons don't work

@frankcabrera6319 5 ай бұрын

I have a delsol slot machine ,buttons light up but when pressed it does not stop the reels from spinning. Any help will be appreciated and I have replaced the stop board but no luck

@Nothing19800 Жыл бұрын

GREAT DEAL!!! I just bought one blind from an online goodwill. All they did was plug it in, they noted nothing else it has both keys. Any ideas on a value of a juggler girl kitac???

@socom1921 2 жыл бұрын

Where did you find the capacitor and fuses?

@JoelRyanQuinn Жыл бұрын

Amazon. Search for "1uf 50v radial dipped capacitor"

@Radioman56-3 Жыл бұрын

@@JoelRyanQuinnthank you sir God bless you I will get some right away

@Radioman56-3 Жыл бұрын

I just got the capacitors in today. Will reap be replacing the one that reads zero zero

@JoelRyanQuinn Жыл бұрын

It will have two prongs that connect to the circuit board. If they're not labeled, the longer prong is the positive and the shorter prong is the negative.

@Radioman56-3 Жыл бұрын

@@JoelRyanQuinn replaced C10 capacitor... Stop buttons work great thank you..

@deannewilson4472 2 жыл бұрын

I have same problem what capacitor do I need to order

@paulsworkshop4179 Жыл бұрын

Did you ever get your sound to work?

@alexwowdotcom Жыл бұрын

You are using the wrong kind of solder. Any Autozone sells the ones thing kind you need.good video.

@Radioman56-3 Жыл бұрын

I have some I'll send you it simple it's rosencore solder

@user-kq2tl9kt6i Жыл бұрын

I need to see a CHERRY MASTER 96 POKER MACHINE FIX BUTTONS WONT WORK

@coffeybrad7 Жыл бұрын

Could you tell me where you got the capacitor from because I had the same problem and I just checked but I can’t even see the damn thing, really bad eyes regardless of how I try to look at it. If you could let me know what capacitor it is I would really appreciate it and way to get it

@thetropicalcafellc1257 Жыл бұрын

Joel…can you make a video to change the pics on the reel? I’m looking to custom mine. Thanks 🙏🏽

@JoelRyanQuinn Жыл бұрын

Here's a user made manual: drive.google.com/file/d/1yjYoiVnCy31zUjwMf_vuu768gj83gnRk I would look for guides/videos on replacing the reel entirely or replacing surrounding parts since this will likely involve removing them entirely. If you plan on painting them, make sure you use a light touch. If one customized icon weighs significantly more than the others, it could set off the anti tilt features because the machine will detect an imbalance and think you're cheating by "weighing it" towards the jackpot. Lastly, you should make my face the jackpot! Good luck

@user-ht9ge8gw8u 11 ай бұрын

I'm also having a reel spinning issue. Stop buttons doing nothing. You order some capacitors but I don't know what the numbers mean on the capacitors or what/where to order.. Please advise..

@JoelRyanQuinn 11 ай бұрын

Search on Amazon for "1uf 50v radial dipped capacitor"