Was just mowing the yard for the second time this season, no issues other than the grass was heavy and I was running blades at full speed. Stopped to pick up a stick, got back on and started blades, 507!! Found this video so I figured I'd get a new board (or two) and follow this. Before all that, checked the app and found out firmware needed to be upgraded. Did so and now the 507 is gone!! So, you might want to give that a try. But I'm gonna order a couple of these boards, just in case.

So 20h that means is still has warranty, mmmh I hope you gust get a new board instead of spending 120$ on it.

I have a Z6 and the right blade wont turn. The left one comes on intermittently. The PTO switch problem indicator flashed on the display. It doesn't give any error codes though. Should I replace this part or is there another likely cause? I have already taken the deck off and thoroughly cleaned it out. Checked my blades out and they are fine.

I've got a 42" thats throwing OVERLOAD errors, but blades seem fine. I'm on to checking the fuses

This man is a genius! I have the exact same problem with a z6 smart steering unit. Both of my blade motors would not spin. Ego had no clue what to do. I followed his instructions and just like that I’m up and running. Thanks brother

At 20 hours is this repair not covered under the 5 year warranty ? I've got codes 313, 507, 607. My right steering motor seemed partially siezed and the tire hard to turn manually. Hoping ego will warranty the machine at only 44 hours of use !

Me trying to understand what all these components are.

Sounds like I need to employee an infrared temp sensor. Thanks for the advice

great video, I just got my new 52" Ego ride on, and it showed up DOA with error codes for the wheel motor boards, lap bar boards, and parking break board... I'm assuming the black box there is the communications board for all the other PCBA systems? how likely is it my mower showed up with a bunch of disconnected wires, over actual fried components?

i took mine apart took left side off saw burnt mark threw a little solder on it and boom! blades back on! im still going to order new 1 but dam! thank you!

Thank you so much for this video and the part link. I have been waiting for this.

Great video! I followed it carefully to fix my 507, but it didn’t work.

Excellent thank you!!

Thank you brother

glad to see my z6 is not the only messy one lol

Hmmmm...

I had the 42” one but then returned it. I had an error code but then did the software update and it fixed it.

Error code 401, loose connection on right wheel motor. Anyone have a fix for this?

Hey friend, great video. If u live in United states warranty stickers dont matter. Ment to scare people. But there is actually a law that protects u to work on this without any issues. Anytime a company plays this game with me after i already took something apart i quote the law and tell them to inform their legal department i will be filing a lawsuit if my issue isnt fixed in a timely matter. So far, ive goten 2 free brand new vacuums(shark), a blender(ninja), a mixer(ninja), a multihead system for yard work(ryobi), several other tools(ryobi). Most of the time, once u take it apart yes they dont want it back to attempt repair since their policy is to not take stuff back for warrantys with that sticker broken, so they just sent me new stuff to replace the stuff.