John Deere 3025E vs Kubota L2501 Comparison

Рет қаралды 67,551

6 жыл бұрын

Take a look at a review of the tractor capabilities on the affordable John Deere 3025E Compact Tractor versus the Kubota L2501.
Visit us at: www.unitedagandturf.com/

Пікірлер: 50

@patricktimothy3018 2 жыл бұрын

I have had my 3025 for just over a year. Only have 250 hrs but the little tractor has handled everything I have thrown at it without a problem. Nothing wrong with the Kubota but I tried both before I purchased the Deere and haven't regretted it a bit.

@bronkbuster1981 4 жыл бұрын

I'm sold on the kubota l2501 vs the cheaper made John Deere

@redwing1273 2 жыл бұрын

And yoy voted for joe biden..way to g0!!

@regs3836 2 жыл бұрын

And of course you have to admire the easy to detach front loader on the JD.

@tractortalkwithgary1271 Жыл бұрын

The biggest advantage that John Deere has over Kubota is dealership network and parts availability. They lead the industry there. Having been a John Deere guy my entire life, I think I am fair when I say that I would have to say that when I was shopping for my compact tractor, John Deere was my first stop. I looked at Deere, Kubota, Massey Ferguson, New Holland, Case IH, and Mahindra. For my needs, the Deeres got ruled out rather quickly. I have to admit, I was somewhat disappointed in the Deeres. My choice came down to between Mahindra and Kubota. I went with the L2501 and have been extremely pleased with it. It has to move the large square hay bales, drag up logs and tops for firewood, brush hog 100 acres of pasture, and other misc. duties. It has been very easy on fuel and the only problem that I have had with it is the loader valve control arm has come loose from the mounting and had to be fixed in the field twice. That's not bad for a tractor with 300 hours on it. Would I have been happy with a Deere? I am sure I would have. But given what I know now, my best choice was the L2501.

@brianberg5060 3 жыл бұрын

I own the 2501. The pedal is great. No problems. Easy peasy

@turbodieseldumptruck Жыл бұрын

I have small feet (size 9) and my foot can and does get stuck in between/under kubotas design. I have run both and the kubota is great, but like john deeres direction control way better.

@johnblake5112 Жыл бұрын

I got my L2501 a couple months ago. Did not like their HST pedal. Got the manual transmission, not as fluid as having a hydrostatic but a little more torque

@greysonbarr5382 Жыл бұрын

My 3025 handles every job I can throw at it

@tacomafan7488 3 жыл бұрын

you just sold me orange ! haha!

@SingleBottomBoys 4 жыл бұрын

Over priced plastic tractor with other branded engine? Or fairly priced iron tractor with its own made engine?

@alexwebster9789 2 жыл бұрын

WHICH ONE IS FAIRLY PRICED IRON?

@peterkoster5053 Жыл бұрын

Dodge and cummins. Chevy with duramax and Allison. Semis running paccar, cat, Detroit etc. Sometimes you let the professionals build the motors because they can do more tests, more tweeking because they have a bigger budget.... guess that's why kubota also sells their engines to put in other brands like ventrac. No different. Is a ventrac garbage because it doesn't use a ventrac engine but has a good proven kubota engine....

@JoshuaOverman 5 ай бұрын

The hood on Deere is actually better it’s made so you can drop rocks on it and have no dents the Kubota would dent

@PeeterPuncher 2 жыл бұрын

I'd rather have a tractor with cast iron gear cases instead of aluminum.

@peterkoster5053 Жыл бұрын

Idk, iv seen some high horsepower cars run aluminum blocks, driveshafts, and wheels. I dont think I'd be scared of that, I mean it's going to have to last at least till the warranty is over.

@Annon89 Жыл бұрын

Which one is cast vs aluminum?

@jakesvideos8204 6 ай бұрын

John Deere=aluminum

@MrManic52001 3 жыл бұрын

Ummmm, so did you pick bobo the clown to operate the very simple pedals?

@MrManic52001 3 жыл бұрын

Wow just outright lies about having to stop the PTO while going in reverse.

@andyober9489 3 жыл бұрын

I'm considering the l2501, what are they talking about?? Maybe if you get the manual trans option?

@MrManic52001 3 жыл бұрын

@@andyober9489 i honestly dont know. An L2501 DT has a single clutch and the PTO is not live continuous, when you shift you must depress the clutch.... but it is so fast you lose minimal PTO RPMs..... the HST gets a live continuous PTO. The l3901DT has a dual clutch, live continuous PTO. So you lose no PTO RPM when shifting F to R.

@jdub229r 3 жыл бұрын

Traded my Massey Ferguson for Kubota L2501HST, compared everything else in its class. JD hydro only has two speeds, everything else in the class have three. JD proprietary quick attach is idiotic.

@peterkoster5053 Жыл бұрын

@Panther Property Maintenance john deeres is lighter and has no moving parts.... every attachment company makes ssqa and jdqa attachments for the same price... iv used both and kinda like the jdqa attach better here in Canada because at my job all the skid steer attachments fill with snow being parked outside and then after you use the attachment the face plate fills with hard snow/ice and you always have to chip it or else the pins don't push in, john deeres has a gap so that never happens. I'll run any machine don't get me wrong, either are good systems and to me it wouldn't be a selling point.

@zmccllc2096 Жыл бұрын

Owned a 3025E. Not bad really, but now that I know more about tractors, I never would have bought it. -Composite everything. I don't care what they say, I want metal -2 speed HST. Doesn't make a lot of sense... zero sense whatsoever with only 25 HP -The quick attach is like an Apple snack in the face, buy our stuff or leave type of thing.

@nicholasverellen8279 4 жыл бұрын

Steering rod sits lower than the axle🤔 plastics usually cracks in the long run(why didn’t they show the Kubota spilling rocks on its hood?) John Deere’s loader can only do one function at a time. Kubota can multifunction. And if the PTO is anything like my dads tractor then you don’t need the clutch to engage it

@shannonpaschal9493 3 жыл бұрын

The loader can do 2 functions at the same Time. I have one so I know trust me.

@nicholasverellen8279 3 жыл бұрын

Shannon Paschal oh yeah? Is it an E series or R series?

@shannonpaschal9493 3 жыл бұрын

@@nicholasverellen8279 E

@nicholasverellen8279 3 жыл бұрын

Shannon Paschal Ok. Maybe John Deere changed that recently because they did NOT before

@JoshuaOverman 5 ай бұрын

Because the rocks won’t hurt the Deere but if they did it on the Kubota they would just dent the hood for no reason. They do dent I’ve seen it

@TSemasFl 5 жыл бұрын

Well that sure convinced me, I'd rather have a all metal tractor, than a overpriced plastic wannabe tractor.

@roflstomps324 5 жыл бұрын

Hemmm... is this really a comparison? The JD with only the loader costs $28K. The Kubota L2501 with a loader, box grader, quick attachment rear mount, and finish mower with an eighteen foot trailer costs $22K... To summarize: JD with having to add the loader - $28K. JD box grader? $2K? JD five foot finish mower? 2K? JD quick attachment mounting? It says contact dealer. So, it must be pretty cheap. Kubota to summarize: $22K. Loader. 18 foot trailer. Four foot box grader. Five foot finish mower. Quick attach mount. $22K. Considering that you could get the L3301HST loader and backhoe for $32K... I think someone is comparing apples to oranges... Did I mention that the L3301 is 30 HP? No? Oh... yeah...

@derrickdebaere1954 4 жыл бұрын

List price is $24,000 on the John Deere 3025E with a loader..... so nice try

@BretAllen1 4 жыл бұрын

Derrick DeBaere Right. But the all metal Kubota with superior loader function & heavy duty axles is 20k with the loader. I paid 21,600 for the tractor, loader, slip clutch heavy duty rotary mower plus a box blade. Nice try! 😂

@spencerstroh2084 3 жыл бұрын

Derrick DeBaere yeah but it’s junk lol

@roflstomps324 3 жыл бұрын

@@derrickdebaere1954 It's a little late but my 'nice try' was off the JD website configurator. I'll run it again... Oh, look. You are right. Seven months later and it is $26,500 for the tractor and loader w/ all the comparable items that came with my Kubota. Oh, but you said $24, 000, right? Yeah, no. Still wrong. It doesn't come with a trailer, brush mower or box blade... So, yeah. My argument stands.

@longtu01 3 жыл бұрын

@@roflstomps324 just got off the phone with JD sale and he quoted me $17,500 plus tax. That includes front loader and box blade

@Coaltrain87. Жыл бұрын

Kubota is king all day every day

@chalemi 3 жыл бұрын

And with the John Deere you get a plastic tractor! Fun stuff when the pieces start breaking off. Woohoo!!! Better WAKE UP John Deere! More and more metal tractors coming out.