John Deere 4010 getting split for clutch issues
Рет қаралды 13,354
2 жыл бұрын
@timdex91 2 жыл бұрын
Nice job.... keep em coming! Stay safe
@Respectearnednotgiven Жыл бұрын
You said that to check it out from the opening at the bottom I do have mine open and the pto stuck not moving at all what do I need to look for to justify splitting. I am sorry but I own one for over 20 years and never needed the pto for my small farm but using the scraper. now “my wife” need few spaces extra for flowers and sunflower beds
@andrewssoundsofthepast110 Жыл бұрын
So when you use the lever nothing happens or it stalls the tractor
@Respectearnednotgiven Жыл бұрын
@@andrewssoundsofthepast110 nothing it’s hard to move the pto shaft even from the back does not turn. The bottom cover was missing originally and lots of dry mud that I cleaned and greased the two points
@andrewssoundsofthepast110 Жыл бұрын
@@Respectearnednotgiven so while running the shaft doesn’t turn at all if that’s the case you have issue I’m the rear
@Respectearnednotgiven Жыл бұрын
@@andrewssoundsofthepast110 that’s what I was planing to take the back apart and check after I am done installing the front dual selective valve that I have issues taking out the last one lol thank you and his bless p.s parts supplier for this tractor with reasonable prices any recommendations?
@andrewssoundsofthepast110 Жыл бұрын
@@Respectearnednotgiven I normally get parts from Deere
@mrme9517 Жыл бұрын
HOW DID THE PTO THROW OUT REMOVAL GO I HAVE THE SAME ISSUE WITH A 3020 IM WORKING ON AS WE SPEAK LBS
@andrewssoundsofthepast110 Жыл бұрын
You mean pulling the pto bearing?
@mrme9517 Жыл бұрын
@@andrewssoundsofthepast110 I FIGURED IT OUT THANKS BUT WHERE DID U GET THAT ENGINE CRADLE TOOL WE HAVE 1 WE ARE USING ITS FOR A INTERNATIONAL TOO TALL WE ARE HAVING ISSUES GOING BACK TOGETHER NOW TO THIS VERY DAY LBVS THANKS
@andrewssoundsofthepast110 Жыл бұрын
@@mrme9517 it’s a friend of mines
@ianhotson6057 2 жыл бұрын
What do you mean it needs repair? It's a John Deere after talking to these John Deere guys those tractors are absolute Magic and never need repair LOL well I'm just absolutely heartbroken!!
@fredf3391 2 жыл бұрын
You had to split it to fix it so no harm done. I would have removed cover underneath n checked it out. I made my own tractor stands n push the back end because I don't want front end to fall over things happen. I also worked midnight's n when I got tired it was time to go to sleephead land. Hope you enjoyed your rest
@andrewssoundsofthepast110 2 жыл бұрын
I pulled the cover and saw the fingers and stuck bearing
@weissfarms7680 Жыл бұрын
@@andrewssoundsofthepast110 I have a question on my 1972 3020 I’ve noticed in gears 5 thur 8 very slow take off compared to what it used to be prior to this I’ve had a noise from that area And I haven’t had a problem with it the 7 years I’ve owned it what do I need to look for to figure out is it a clutch problem or something else ?
@andrewssoundsofthepast110 Жыл бұрын
@@weissfarms7680 I’m not real familiar with the side console. If you labor the tractor does it feel like it’s slipping Also yours is a syncro right
@weissfarms7680 Жыл бұрын
@@andrewssoundsofthepast110 yes it’s a syncro its like it really sluggish on take off bearly wants to move than after 5 seconds it’s fine ..and going up a small hill it gets sluggish and starts to slow down with high rpm’s gears 1-4 seem ok only does it 5 and above
@andrewssoundsofthepast110 Жыл бұрын
@@weissfarms7680 I’d say your ready for a clutch
@bobearthquakepumpkinfarm7455 2 жыл бұрын
Ugh. All the 'while you're there' things.