5.9 Cummins is putting out a lot more horsepower than the stock John Deere for sure .
@jwmfarms5 ай бұрын
Yeah, and you don’t have to shake the steering wheel to get the thing started, either!
@scottfuglie94175 ай бұрын
Thank you Dan for taking the videos.
@danbeske85935 ай бұрын
Scott, this video is getting massive views! People seem to really like your tractor and the conversion you did!
@burtbrooks77315 ай бұрын
Sounds good💪 look how dark that dirt is!!!! She’s yank’n that plow thru there like it ain’t no thang
@thomasharrington53695 ай бұрын
Walking tall with that plow👍👍
@anthonyatkins58265 ай бұрын
Purring like a kitten too
@wtchr68835 ай бұрын
Sounds terrible dude. Like governor trouble.
@RonaldPedersen-ub4my5 ай бұрын
Way cool !!
@larrymartin96205 ай бұрын
Just a good fit for the 4020 pulls the plow with power to spare
@davekana83885 ай бұрын
That’s a beast! Sounds so cool!!
@danbeske85935 ай бұрын
Right? Thanks for watching, Dave.
@davekana83885 ай бұрын
@@danbeske8593 so right!
@craigbruske68665 ай бұрын
That is sweet. Very curious how you adapted it to the john deere trans and bell housing and clutch.
@danbeske85935 ай бұрын
Hi, Craig. Sometime this Summer, I'm hoping that the owner may want to do a video to explain how he made this conversion. I have no idea how it was adapted. Thanks for watching!
@danielbuchanan35935 ай бұрын
4020 with turbo just as good
@charlesfuglie24915 ай бұрын
Nope not even close!!!! Engine is only set at 300 hp
@shannonburns67245 ай бұрын
You been smoking some bad stuff. That little Cummins is 3 times the engine that came in that deere. He better keep it at 150 or it will grind everything into junk. Now a 5020, that is where a 250hp 6BT would shine.
@terryanderson43665 ай бұрын
Tire slip is obvious and too much torque for tranny, final drive etc. Short life of equipment. Agree that up grade to 5020 would be far better for weight, traction, etc.
@user-lf3uu3ez1f3 ай бұрын
Great videos Dan! What gear are you in?
@963dj5 ай бұрын
Finger wave. Hell yeah
@danbeske85934 ай бұрын
I know, right! I loved that!
@thomaswhitsel65815 ай бұрын
Uncle Bob had 57? 720deere had 250lb. OMF wheiths then built a frame to hold 3to4 100 lb. Plus wheel weights pulling an A.C. 3 /16 plus add on hydraulic reset ,hooked to rock with (#4)add on and busted the bottom,no Grease fitting s or drilled, tapped, machined for lubricantion
@scottkinkead63245 ай бұрын
The plow isn't in the ground very deep , the weels in front are only a 1/4 of the way in the dirt
@tommckinley1115 ай бұрын
Interesting, looks like a fun work in progress, how much horsepower is it putting out? Seems to have plenty of snort.
@danbeske85935 ай бұрын
Thanks for watching, Tom. I'm not sure how much HP it puts out, sorry.
@scottfuglie94173 ай бұрын
Is at about 300hp.
@joeblack645 ай бұрын
With stock transmission and rearend does that creat a problem
@danbeske85935 ай бұрын
I'm not sure, Joe. I'm hoping to maybe make a video this Summer with the owner who can explain how he made this conversion. Thanks for watching.
@scottfuglie94175 ай бұрын
Is stock just pull what they were supposed to pull if running all day within reson just doesn't slow down
@chadgronsten90235 ай бұрын
A Deere 404 (in a 4430) has more low rpm lugging power ( low rpm, just off of idle) than a 5.9 in a 6125 Agco White. The 404 is under rated. A 5.9 is a horse in a pickup. In a tractor they are efficient, but not a torque monster by any means.
@scottfuglie94175 ай бұрын
When I plowing was running 1600rpm 5th gear with a lot to spare was about 6 psi boost and can go to 32psi ,has very good torque the way the engine is setup, is fun to drive
@chadgronsten90235 ай бұрын
Very cool project! I bet it is is very useable and fun to drive.
@bobocaterpillar36975 ай бұрын
that is some SOFT ground!
@danbeske85935 ай бұрын
It's really great ground! Thanks for watching.
@wyatt123585 ай бұрын
WHAT MODEL CUMMINS IS IT
@charlesfuglie24915 ай бұрын
Came with inline pump
@toddgittins56925 ай бұрын
BT
@mattphillips42605 ай бұрын
tractor could use a bigger plow
@raycommance63364 ай бұрын
It looks like he is just turning the tops not going very deep
@scottfuglie94173 ай бұрын
About 7in deep
@jamesdalton35095 ай бұрын
Why would you replace a 404 jd with a 360ci cummins let me know how it works out 10000 hours later the 404 will still be running
@scottfuglie94173 ай бұрын
Old engine had 3 holes in the block ,and I had 5.9 to put in it. The 5.9 is a good engine have other ones that have a lot of hours on them.
@lowlife51425 ай бұрын
Sounds red. Sounds good
@richarddodds93265 ай бұрын
The moist soil is keeping the plow from overheating from being pulled so fast..
@dalekrinke26745 ай бұрын
He must have forgot to drop the plow 👎👎
@scottfuglie94173 ай бұрын
About 7in deep
@amywedge96964 ай бұрын
Thats not ploughing !! Thats throwing beautiful soil around too fast to give the stubble time to fold under Roger ,New Zealand.
@dustineiffler71455 ай бұрын
Looks cobbled as fuck
@wtchr68835 ай бұрын
Sounds like it needs work
@lowlife51425 ай бұрын
HahaHa they used to call it "unstyled"
@user-lf3uu3ez1f3 ай бұрын
Great videos Dan! What gear are you in?
@danbeske85933 ай бұрын
I'm not really sure what gear the operator was in, sorry.