First time at a tractor pull with our 1950 John Deere AR AR Rescue Video Playlist: • John Deere AR Rescue
Пікірлер: 56
@stephenmccool812729 күн бұрын
Just subscribed. There is no other sound than that of a two cylinder Deere especially pulling a load. I'm 65 and grew up with an R and a 50. The 50 still runs and is I'm the family. Thanks for the living vicariously!
@jonelsonster29 күн бұрын
Thanks for the sub! The sound of a two cylinder Deere is iconic! I've never driven a 50. We have had a few B's over the years. And my Uncle runs a 60 on his farm. But the 50 is one tractor I need to find!
@keltonwright721 күн бұрын
Love watching for the john Deere stuff, but man that scenery you get to live and farm within is something else, just unbelievable.
@jonelsonster17 күн бұрын
Thanks 👍 it's nice having some open air where you can breath.
@dannyroach8743Ай бұрын
Love seeing the old vintage green come back to life. Great job
@jonelsonster29 күн бұрын
Hanging out in the shop working on these old tractors is the best way to spend free time. Thanks for watching!
@larrydavidson3402Ай бұрын
I think it done just fine. Love them old John Deeres when they are pulling hard.
@jonelsonster29 күн бұрын
Agree!.
@corsairsmitty969129 күн бұрын
I trailer around a 1963 Massey Ferguson MF35 Utility Govt edition. It weights around 3500 pounds. The trailer I use is older and is a 14k, 16ft trailer weighing in at 4K. I tow with my 2016 F150 with a 5.0 V8. I have also towed a 1941 JD model A weighing in at 4600 pounds. I always keep the middle of the back tire on either tractor centered between the dual wheels of the trailer. That was it keep a good load on the truck, while allowing the trailer to handle the majority of the load weight. I also use a set of Timbren SES springs. The spring are made of a rubber plastic material, that get denser the more weight that is added. They do make the backseat of the truck ride rougher. But I don’t get any trailer sag when I tow the MF35, and only a little sag when towing the Model A.
@jonelsonster28 күн бұрын
This trailer is I think 18' plus an additional 2' for the dovetail. Tandem 7k lb axles. This AR probably weighs about 5k - 6k lbs. My Ram 1500 has plenty of power with the 5.7 hemi. It's just the suspension that is a little light. So I'll have to look into some helper springs like you mentioned. I think my next truck will be a 3/4 ton. If I could afford it, I'd love to pick up one of the newer Ram Power Wagons. But they are $$$, so I will probably settle for something more affordable.
@wemedeeres410526 күн бұрын
I have a ‘49 AR it’s not too far into the styled models, it’s a fun little tractor to plow with, never thought about taking it to a pull so I might have to change things up and take that next time. Another thing I like about it as I can let my kids drive it around and I don’t have to worry about them falling off, they’re pretty protected sitting down in between those fenders.
@jonelsonster25 күн бұрын
That's very true! Wheatland it standard style tractors do a good job of isolating the driver/rider from fall/entanglement hazards.
@wademizelle343324 күн бұрын
Great video, love anything concerning tractors and farming. Thanks
@jonelsonster17 күн бұрын
You and me both!
@MrEcm5129 күн бұрын
She sounds good! I like my 70, but I love the sound of an A or AR pulling!
@jonelsonster29 күн бұрын
Agree! Not sure what it is about a 70, but they just sound awesome!
@lttl85829 күн бұрын
I knew the AR was strong from your plowing video.
@jonelsonster29 күн бұрын
👍🏻😎
@AndrewHCann29 күн бұрын
Excellent video Jonelstar :) yes nice see old John Deere tractor in 2 cylinders my families oldest John Deere tractor is 710 Desiel motor row crop with loader my uncle Roy still has full restoration back 2007 done before John Deere Dealership near us shut down forever in 2010 ! It was my grandfather (my uncle father) , his 2 brothers tractor shared on 3 farm years ago! In super condition to plus all decals match ! Got lots updates on 710 !
@jonelsonster28 күн бұрын
Very cool!
@donnydenfeld239427 күн бұрын
Your AR sounds great under a load. I also own a 1950 AR. Keep your great videos coming
@jonelsonster25 күн бұрын
Thanks, will do!
@79fordblakeАй бұрын
The AR did a great job! Looked like track was pretty loose.
@jonelsonster29 күн бұрын
Yes, it was dry and sandy. Not the best conditions for pulling. But at least everyone had the same loose track to deal with.
@mccurdykids853424 күн бұрын
My dad and I are currently working on restoring our 1950 John Deere AR. We restore antique tractors to take to tractor shows/pulls.
@jonelsonster17 күн бұрын
Sounds a lot like what we do for fun too
@MusicandTractorsАй бұрын
Hauled a 630 with fluid in the tires with an F15. tractor weighed 7,600. The road was wet and my dad had the tractor loaded a little too far to the back of the trailer. I had fairly used tires on. Spun the truck tires at every intersection. I’d be lying if I said that I wasn’t scared driving that load. On the way home we made sure it was loaded more on the tongue. Much more balanced and felt safer, no truck tire spin. I have since put timbren springs on the truck to help with the weight. I try to get the rear axle of the tractor in between the axles of the trailer. A friend of mine hooks his rear chain up and then drives forward until it’s tight so he’s loaded at the same spot every time. But he doesn’t put a chain binder on the back . I’m not really fond of that idea but I like having a set mark for where it should sit on the trailer. So I agree with you. Little more tongue weight won’t hurt.
@jonelsonster29 күн бұрын
😬 wow! Yeah, it will definitely keep you on pins and needles! I'm glad it all worked out well for you.
@lewiemcneely914328 күн бұрын
I'd rather have a little muck on the tongue than too little. When I was pulling a dump trailer with the old RD Mack on steep gravel I'd slide the 5th wheel forward 3 inches to get more on the drives and back for highway but the RD was sprung with walking beams and stiff as a wagon and would kick easy, 44 rears and 38 front. The old popper did a FINE job and bet the folks had a time! Blessings, yall!
@jonelsonster28 күн бұрын
👍🏻 yup. It was a good day.
@lewiemcneely914328 күн бұрын
@@jonelsonster I'll 2nd that!
@tootired7629 күн бұрын
Got my weekly JD fix! 😉
@jonelsonster28 күн бұрын
Ha! I'm happy to be your dealer 😂
@tractordan93329 күн бұрын
The AR is a fun model to drive, I have a 1953 AR. The ride is unique as you sit on the tail end yet still have good visibility. Certainly easy to load on most any trailer being so narrow. Thanks for the video.
@jonelsonster29 күн бұрын
Yup! Very good visibility is right! Does your AR have very stiff steering? Ours is ridiculously hard to steer. We need to open up the little steering gear box and loosen it up.
@tractordan93329 күн бұрын
@@jonelsonster yes mine also steers very hard (probably caused by me) having had it all apart for painting.
@lindanelson8400Ай бұрын
That's a very nice looking and running old John Deere!
@jonelsonster29 күн бұрын
Thanks!
@Antdroid7721 күн бұрын
Your right about the toung weight and almost every thing else
@jonelsonster17 күн бұрын
👍🏻
@DavidCampbell-n8z29 күн бұрын
great video!
@jonelsonster29 күн бұрын
Thanks! 👍🏻
@UnbannMe27 күн бұрын
If you want to work an 2 cylinder get an old belt driven fan. We have one at the tractor club I'm a member at. We call it the engine break in fan because it will bog down any 2 cylinder. I run my 35 A on it twice a year.
@jonelsonster25 күн бұрын
That's would be cool to see. Sounds very similar to a PTO Dyno. In that case the working fluid is the oil you're pumping. In this case it's the air. Both do a good job of taxing the machine. One thing I like about the fan idea is that it's direct drive to the crankshaft.
@UnbannMe24 күн бұрын
@@jonelsonster the kids get a real kick from it
@clarencetrice444212 күн бұрын
after a gas tractor 🚜 😮 sets a while U should take a wrench and tap the carb when it is running it keeps the float from sticking and the tractor 🚜 😮 needs more weight on back tires 2 light and when U pull a tractor 🚜 😊 on a trailer U want the back tractor tires over both axles of the trailer 😊😊 OMG 6 2O 2O24
@jonelsonster12 күн бұрын
👍🏻
@smoothormond29 күн бұрын
Perhaps you should eat a few extra hamburgers before your next tractor pull.😊 the AR is a fun tractor. I'd be curious to see how it pulls compared to the standard model A.
@jonelsonster29 күн бұрын
Challenge accepted! You'll have to watch next week's video. I show this and a row crop A back to back.
@reedchandler237229 күн бұрын
When are you going to get started on the Oliver 70?
@jonelsonster29 күн бұрын
I worked on it a few weeks ago. That video will be dropping in the next few weeks. I need to finish editing the footage. It still has issues... carburetor issues. And I'm hoping once I get that figured out then it will run more smoothly. We needed shop space so we had to move the 70 back out to the shed.
@anthonyhengst2908Ай бұрын
Sounds great (especially when it has fuel 😂). These are very unique to me they have the sturdy look like an R. What was the purpose of these when they were built?? Orchard?? Or was the "R" indicating "regular". I certainly see these being sold in prairie lands.
@brianrvd29 күн бұрын
The "R" in "AR" is for regular tread, later called standard tread. It was for wheatland areas. They made this same tractor as an "AO" for orchards. It didn't have the stacks above the hood, and the lights were under the grille instead of on top of the fenders. Full orchard sheet metal was available too.
@jonelsonster28 күн бұрын
The response from @brianrvd is spot on. But I do like how the AR has a grill and nosecone very similar to an R. Because of that I like to think of our AR as a baby R... When in reality it has very little in common with it's diesel powered big brother.
@LarsDcCase28 күн бұрын
How come you didn't check out the tractor completely before starting this video? That's not very intelligent of you, filling the fuel tank with the engine running. 😒
@jonelsonster28 күн бұрын
I'm just bringing you along for the ride. I easily could have edited that out . But I figured I'd leave it in because it's real life.