Thank you for this!! I made the same mistake at the end lol so I appreciate you!!
@gregn42897 ай бұрын
I wish I watched this video before I changed the belt. I did exactly what you did and snapped a brand new belt. Anyway bought another and it's working fine now. Thanks for the how to 👍
@pattyw8312 жыл бұрын
Hey Bob, I just can't wait to try changing the belt, kidding of course. I'm a 70 year old lady but mechanically inclined since I built engines at Briggs and Stratton for 25 years, so this job will probably take me 2 hours to change the belt but thanks so much for the Video or I would really be lost....lol
@e-man2081 Жыл бұрын
How do I TIGHTEN the belt. I have an E110 with the welded on bracket instead of two bolts for adjustment. Thanks.
@JungleBobRepair Жыл бұрын
You can't
@woodwoman9130Ай бұрын
@@JungleBobRepairgeez mine is too loose and there is no adjustment wondering if this belt stretches over time.?
@JungleBobRepairАй бұрын
@@e-man2081 you'll have to get new belt
@JungleBobRepairАй бұрын
@woodwoman9130 it doesn't stretch just wears,replace belt with an oem belt
@hillbillyhigh2527 Жыл бұрын
If I just wanted to buy a car built for it at tractor supply what is the links of that gx20072
@TheIronDuke5022 жыл бұрын
Jungle Bob. I have both Cub Cadets & John Deere tractors and have made my share of mistakes; But learned a “Heck Of A Lot” in the process whether I wanted to or not. Routing a belt on a Super A FarmAll with a L59 Woods belly mower can be really fun too - Sarcastically Speaking Of Course. I wanted to let you know that I had subscribed to your channel and look forward to seeing your upcoming videos. Best Regards From Versailles,Ky.
@chrisssmallengines71633 жыл бұрын
If the belt broke , I would be looking at the blades for damage and or sharpening . If you did you did not say it in the video . A little grease on the spindles would not hurt .
@JungleBobRepair3 жыл бұрын
Good point Chris,you are spot on,didn't grease the spindle but the blades were fine.Should have mentioned that it shhould be checked.Thanks for the feedback!That's how.we learn..
@mobetter81572 жыл бұрын
How do I adjust the deck belt on john deere e110 I got the oem belt and still no luck please help me
@JungleBobRepair2 жыл бұрын
No.adjustment on belt check your tensioner spring and pto cable.They have 2 different belts depending which deck you have.
@natal7773 жыл бұрын
You can change the belt without dropping the deck
@ArchangelV116 ай бұрын
I used a cheap belt and paid the price. Don't get cheap belts
@solrosenberg3803 Жыл бұрын
Way too many steps not shown. You need to redo this video and actually go through the steps instead of taking a break every minute, and then all of sudden the parts are all put back together once your break is over, WITHOUT showing how to do it.
@JungleBobRepair Жыл бұрын
Thanks for watching!
@johnrmc703 жыл бұрын
I can’t get my tensioner pulley to lift up. Any suggestions?
@kbssmallenginerepair26153 жыл бұрын
Good job Bob!
@TheRustyRooster3 жыл бұрын
Another good one Bob
@francislang50753 жыл бұрын
good job bob
@the1spyderryder2 жыл бұрын
Why do you insist the doing that the hard way you don't need to remove the deck to replace the belt !
@JungleBobRepair2 жыл бұрын
No one said you did,but someone might want to know how.
@anfieldroadlayoutintheloft52043 жыл бұрын
good vids
@johnfrensch98793 жыл бұрын
I presume the D110 deck belt fits the same way
@henrymurawskibigdogrepair3 жыл бұрын
The spring on the deck for the PTO is put on upside down the hook goes from bottom up in the hole
@JungleBobRepair3 жыл бұрын
not on the John Deeres Henry
@bobbouchee14522 жыл бұрын
lol i had the same problem glad it was easy lol
@Squad-pl7oo2 жыл бұрын
If my Craftsman has 2 blades can I take 1 blade off and cut my grass my deck is 42
@JungleBobRepair2 жыл бұрын
Just take twice as long
@Squad-pl7oo2 жыл бұрын
@@JungleBobRepair For my grass 2 blades=30 minutes 1 blade=1 hour