Building a tool to remove the clutch from the stub shaft on the engine.
Пікірлер: 26
@Swinny19652 жыл бұрын
Helped me out cheers 👍🏻
@billkirkland63893 жыл бұрын
What was the length of the bolt after you cut it?
@tomhinklejr.50553 жыл бұрын
I wanted to take ours off the 6x4 we have, but was told it'll fly apart after I remove the bolt. Obviously, I was misinformed! Thank you for the video.
@mmrbeef3 жыл бұрын
Glad you found it useful!
@MollerFarm2 жыл бұрын
They were probably talking about the secondary clutch. This here is the primary.
@FirstLast-tw1qf4 жыл бұрын
The shaft you removed what size is that is it a 1” taper like a golf cart?
@outdooreng49734 жыл бұрын
Hi I have some issue with my gator transmission Its working but with some struggle to push back and forward Its kind of stuck with a sound like clutch issues (i am just guessing) Really bother me What can i do
@rehoboth_farm2 жыл бұрын
Why not just mark the bolt with a sharpie and then subtract another half inch?
@andrieswessels-kg3hj2 ай бұрын
How do you "split" the clutch /pully
@bradhill58224 жыл бұрын
Be sure to use grade 8 bolts, I have read numerous posts on various forums of major problems caused by using grade 5 bolts.
@user_21734 жыл бұрын
Quick question will the new 54in quick attach snow blade for the Xseries fit the 430?
@mmrbeef4 жыл бұрын
Yes, you can use the 54" QA blade if you have the correct quick hitch for the 420/430. Deere released the quick hitches for the 420/430 in 1992 as they released the 4-5 tractors. Granted the 420/430 quick hitches are not common, but they are required to use the QA style snow blade. Hopefully that that makes sense.
@mmrbeef4 жыл бұрын
Here is a video I did on quick hitches. I can't remember if I covered the 420/430 in this one or not but it gives you an idea of what might work and what you are looking for. kzfaq.info/get/bejne/gNqPmJSWr8iRkoE.html
@jasonpatterson22584 жыл бұрын
Any chance you know part number for that clutch ?
@doctormcboy50092 жыл бұрын
am 138528
@j.pedersen82434 ай бұрын
Woukd heat not loosen it from shaft
@vt127210 ай бұрын
Wouldn't it be a lot easier just to tell us how long the final bolt is? FFS
@iwin18332 жыл бұрын
John deere should be ashamed of themselves selling this puller for $40
@johnathanlilley56383 жыл бұрын
A
@allanfranco44644 ай бұрын
LOCK THE CLUTCH IN A VISE OR SOME THING FOR CRYING OUT LOUD
@seandonnelly31504 жыл бұрын
Grease, bread, putty, all would have worked, i bought a $3.50 bolt and the rest of the space I filled with bread
@mrwzrd528 Жыл бұрын
This video is of no help. Your to all over the place
@davidschrack13052 жыл бұрын
you are no mechanic
@mmrbeef2 жыл бұрын
Never claimed to be…. Are you? If you are you should start a KZfaq channel to show people how to do it right!
@msyrahtom Жыл бұрын
What actually goes wrong with the clutch? What wears out? Can it be fixed?
@CVOSTREETGLIDE2 жыл бұрын
What was the length of the bolt after you cut it down?