Replace them all. Good idea. Even though only one failed, when I removed them, all were worn, with wobble.
@waelgerish4 жыл бұрын
Il130 I bought a mower deck rebuild kit of eBay it turned out to be junk wasted my time and energy and ended up buying from a local John Deere dealer I would definitely recommend to spend the few extra dollars and get a quality parts nice video I wish I have seen it before I worked on my mower 👍
@anthonymarino42602 жыл бұрын
buy once cry once
@garytompkins69555 жыл бұрын
It would be nice to see the spindle replacement process since that is the title of the video. :-)
@ryangehrke80194 жыл бұрын
Did you have issues following along?
@johnmilner760311 ай бұрын
The grease does get into the sealed bearing when 80 pumps are achieved. You will know your done when it come out of the blade side and top of the spindle. There is a video online where a guy prooved it by using a different color grease. Don’t listen to the know it all’s. 😅
@blairthandi70586 жыл бұрын
Sweet video. We had to replace one of our spindles after 13 years. Yeah, John Deere doesn't give the 4 bolts with it, you need to get them separately. I need to paint the deck over, since old paint is coming off after 13 years. We in Abbotsford BC finally have a month straight of sunny weather coming. Time to cut the grass.
@ryangehrke80196 жыл бұрын
Blair Thandi lucky you on the weather, middle of April and we just got hit with another snow storm here in Southern Minnesota! I see no mowing in my immediate future.
@blairthandi70586 жыл бұрын
Saw that on the Wild vs Jets broadcast.
@jamessizemore74495 жыл бұрын
Ryan Gehrke 9
@tommyscruggs72653 жыл бұрын
If the bearings in the spindles don’t have the grease covers removed toward the inside of the spindles that grease zerk is useless.
@harrison48036 жыл бұрын
Good information! I will be replacing 1 when the weather breaks! I always start my videos before I take the belt off, so I can replay it and review how it was before! :)
@ryangehrke80196 жыл бұрын
John H good luck with the replacement. It's still snowing here so won't be mowing for a while which is fine with me.
@harrison48036 жыл бұрын
Yeah, Ryan, I am just West of St. Louis and we should be in the 60's now but instead 45 today but near 80 by Wed. They have a saying in Missouri, "if you don't like the weather, wait a day and it will change".
@grasspro1046 жыл бұрын
The bearings are sealed. Unless you use a needle on grease gun and inject it under the rubber seal greasing the nipple on spindle will just keep out moisture and will not reach the bearings. Unless John Deer redesigned the spindles that's how they work.
@TRUCKERMcD4 жыл бұрын
You can pull the plastic covers off the inside of the bearings so the grease gets in. :D
@douglasdailey59985 жыл бұрын
Wow that's the cleanest deck that I have ever seen.
@jameskenney13402 жыл бұрын
The old pulley assembly did not come with a Grace might because it was a selling point to make money
@SeanTaylor232 жыл бұрын
What is the nut size
@donny-ho1bm2 жыл бұрын
Can a 48 inch deck fit on a ride on that has a 42 inch deck..
@Youllvanish2 жыл бұрын
I got 3 new spindles, new belt and new blades (basically a rebuild kit) for $108. Wait the couple days and please don't pay 50 bucks per spindle.spindles. Ebay folks, ebay...
@brianharding736910 ай бұрын
That new spindle with the Zirk fitting means nothing if the bearings inside are sealed. Do more research. For 160 you can buy a rebuild kit and everything is new. Comes with 12 new self tapping screws too.
@georgecrutchfield87346 жыл бұрын
Grease your spindles before you attach them to the deck, at least my grease gun won't reach the grease zerks after they are attached to the deck. I wish my dealer had spindles that cheap, I ordered mine online.
@Youllvanish2 жыл бұрын
Ebay, get a full rebuild kit for 100 bucks. For the 48" deck.
@johnsantillo59045 жыл бұрын
Were the holes for the blades tapped?
@ryangehrke80195 жыл бұрын
Yes
@dancohen4414 жыл бұрын
"Talking about it".
@kevinc90065 жыл бұрын
This lawn mower has been junk since day 1
@dawgedr15 жыл бұрын
You have the main tensioner pulley in the wrong place. You ha vegan idler pulley where it should go.
@ryangehrke80195 жыл бұрын
Put it back together just how I took it apart and works with out any issues.