John Deere Lawn Mower Deck belt replacement

Рет қаралды 461,102

Күн бұрын

In this video I show you how to replace a John Deere mowing deck belt. I also show you how to remove and reinstall the mowing deck.
The part number for the belt I used in the video is GX21833. I have seen that the part number GX20571 is listed as the same. Here is a link to the belt I bought.
48" Deck Drive Belt - amzn.to/3t7IwnY

Пікірлер: 70

@markdomanico7936 2 жыл бұрын

Please never take this video down you’ve saved my butt twice. I’ll keep coming back to this video for the rest of my life every time I need to mess with my deck.

@HowToWithJames 2 жыл бұрын

Thanks for the comment! This video won't go anywhere. Glad I could help you.

@002seleena 10 ай бұрын

I expect this mower will last several seasons with decent care. kzfaq.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

@kennethkline7794 Жыл бұрын

This video is right up my alley. Simple yet effective. My belt snapped. I tested all the spindles and pulleys and noticed the 2x 3 5/8 pulleys on my LA145 were not free spinners like the rest of the deck. Thankfully Amazon can get me them in 2 days. Everywhere else was 4-5 days (weekend included). I waited an extra day to fix but I don't think it's wise to put a new belt on a deck if there's a reasonable chance to snap the belt again with tight pulleys.

@havok_1957 2 жыл бұрын

After watching this vid, it took me less than 45mins to remove the deck, replace the belt, and put the deck back on. The tips made all the difference and I thank you for that.

@richardsutherlin5162 3 жыл бұрын

I was going to search for a belt diagram, but took a screen shot during your video instead, thanks. Next time I change out the blades I will definitely just drop the deck, so easy now that I've done it once!

@lecrapface5270 Жыл бұрын

Dude, your video was the only video that helped me. My father has a Craftsman 917 series tractor mower and I swear someone put a John Deer deck on it because I was looking through videos to figure out the deck belt routing and I saw the thumbnail for your video. Sure enough it's the same deck. Thank God for your video

@donaldnewsom3193 3 жыл бұрын

Thanks your mower is just like my 155c. . Bought a new deck, as I have hit too many trees. Thanks for all your videos on this model.

@graciasreallyhigh9347 3 жыл бұрын

Aww man God Bless you. So many small tips and tricks probably would have spent 4 more hours wrestling with the deck had I not watched it. Thank you so much. I'm going to watch all your videos now

@HowToWithJames 3 жыл бұрын

Thanks! I try and you're welcome!

@melindastahl497 3 жыл бұрын

Thanks for posting this! The tips helped!!!

@23xboxrocks 3 жыл бұрын

Great video thank you! 🙏🏼

@tanozVIP 2 жыл бұрын

Thanks ! Very informative video! 👍👍👍

@bellapawcarelive7561 2 жыл бұрын

thanks James made my life easy

@barryfreeman303 10 ай бұрын

Thanks man. My belt came off and I couldn’t figure it out to save my life. This is just what I needed.

@EnviroSteward 3 жыл бұрын

S*** man!! That tip about moving the deck forward did it for me. Thank you. I had an inkling but I was trying to be lazy and not remove the 4 pins and drop it...but we all know what laziness can bring. Good luck!

@mrgritz4761 3 жыл бұрын

Great tip

@mrgritz4761 3 жыл бұрын

Great tip

@captaincrunch8333 3 жыл бұрын

Ty so much for this. Now to try it out.

@orlandoneal5758 2 жыл бұрын

I am a housewife and house cleaner lol you did a awesome video especially all the tips and tricks it would have taken me forever thanks so much

@danieldavis4784 Жыл бұрын

Thank very much now iam still a john deere man .thank again

@g.hobbins4107 3 жыл бұрын

So helpful! Thanks!

@micsherwood4930 2 жыл бұрын

Excellent job!

@timspur7203 3 жыл бұрын

i have a la130 48 inch deck keeps throwing or breaking belts i see the idler pulley isnt exactly even wonder if this is the problem or do i need to go to a oem john deere belt....i have a d140 same deck and the idler on it seems a little uneven too but the belt does good on it....not sure if the idler is bent or just made that way

@patrickwall5433 2 жыл бұрын

Now THIS is how you do a damn tutorial video! Thank you!

@kevinlawson9628 2 жыл бұрын

Thanks for the help

@joeking433 3 жыл бұрын

I have an E140 and the deck belt goes on the same way. I had to bend those tabs on a couple pulleys because I took off the nut and the pulley still wouldn't lift off. I paid $40 for my official JD E140 belt. They screw ya for John Deere parts. Also, I couldn't stretch my belt around my pto pulley so I disconnected the 5 hanging pins and put the belt on the pulley first and then hung the deck again.

@KA4UPW 3 жыл бұрын

actually some nice close-up photography work

@HowToWithJames 3 жыл бұрын

Thanks! I try to make it easy to see what needs to be done.

@damiensmiley9587 3 жыл бұрын

@@HowToWithJamesm xcleg

@mikekripas8264 3 жыл бұрын

@@HowToWithJames p0 Yes uyu

@badbiker666 3 жыл бұрын

I had a further problem while installing a new belt. The replacement was so stiff that I couldn't get it to stay around the pulleys. After reinstalling the 4-screw cover and muscling the deck back into place, the new belt came off the far left pulley. I tried removing the cover to see if I could get it to loop back, but no dice. I had to take the whole thing back apart again, only this time I left the covers off and reinstalled them after the deck was mounted again and the belt was properly seated.

@dakotahendrix9037 Жыл бұрын

Leave it in the sun!

@Mike-su8si Жыл бұрын

I found alot of problems on mine my friend who i do alot of work for gave me and he said it was in the shop and that the engine was rebuilt but I've checked and part of the engine was i don't see why reuse old hard gas lines on one that was rebuilt and a dirty carburetor and the shop used wrong gasket maker on the valve cover shop kept i guess the original coil on it its a 1999 coil still good but its not new the flywheel is a 2005 so the shop put that on the cylinder is new the valves are new But the shop couldn't figure out why it wouldn't start up and it was just a few safety wires needing twisted together some white ones just cut off And the wire that kept them from starting it up was the white wire going to a yellow button and one to the top of the coil. It was grounding it out as they were trying to start it up probably won't need half the relays they've got on that Lt155 after disconnecting all the safety buttons that causes problems

@jefferyjackson8881 2 жыл бұрын

Great Video Thanks

@donpreston3796 Жыл бұрын

Thank you for your help

@RoketEngineer Жыл бұрын

Great video!

@Sultaneous 2 жыл бұрын

@7:34 How do you get space between the guard and the pulley to slip the belt through? I have the 54" deck, and the pulleys don't move away from the guards. If they are lose like that, they won't protect your belt from slipping and unspooling. I've had to remove the pulley and pull it up to put the belt on. Also, the move the deck forward trick helps if you removed the deck; but the tensioner pulley can be used if the deck is on, instead. With a wrench, move it forward, and the tension is reduced enough to slip it on the drive pulley. Again, I have the 54", so these may be differences between it and the 48" deck.

@plamenplamenof3567 11 ай бұрын

This thing is awesome!!!

@TAO495 3 жыл бұрын

I have John Deere S160 and I don't need to take the deck out. You can put the new belt while the deck is still in place. Good video though!!

@jamieblevins2723 Жыл бұрын

Could you show me a belt guide for jd L110,they sent one to big mine is silver,small.deck will not pull up with big one

@josephlyon95 Жыл бұрын

I’m putting the belt on right but everytime I engage it it slips right off again?

@JamesPinneo 3 жыл бұрын

Great video instruction. Did you take the pulleys off when you put the new belt on?

@HowToWithJames 3 жыл бұрын

I did not take off any pullies. Everything I did I showed in the video. If you are not sure how to do this I would suggest watching it again to make sure you are comfortable. If you still have questions after watching it again let me know. Good luck and thank you!

@PedroPerez-ui4br 2 жыл бұрын

Good men👍

@RichardDavies-ze5nv Жыл бұрын

You belt was off the main drive pulley when you did up the front deck bar...😁

@Mike-su8si Жыл бұрын

I still gotta go through all my wires and redo it to how i like it without the safety buttons and cut um out the mower shouldn't have that many relays and it doesn't need all those safety buttons im gonna take 3 relays off and wire 2 together as I've done to my older L110 John deere

@timothyrussell4010 Жыл бұрын

what is the belt number im having trouble getting the correct belt number

@HowToWithJames Жыл бұрын

Look in the description of the video. I also provided a link to purchase it on Amazon.

@bibisc9663 2 жыл бұрын

thanks!!! great video! i have an D170, and your video helps me a lot! i am in Brasil, can i translate to portuguese? i tried to do a video.. but was not so good kkk

@HowToWithJames 2 жыл бұрын

Thanks! Yes feel free to translate the video to Portuguese. I appreciate your help in doing that.

@olengivens 2 жыл бұрын

4:30

@babyyoda0U812 2 жыл бұрын

Thank you

@BobbyGrubb-xy4iv Жыл бұрын

Drive belt

@theob5497 3 жыл бұрын

Did not put belt on completely, still off pully and not even tight.

@jansaari1047 3 жыл бұрын

The belt becomes tight after you refit the deck. If you put the deck back on first, then it is a little bit hard to get the belt around the forward pulley.

@michaelmiller8378 3 жыл бұрын

I notice the belt was not around the pulley when he put it back on front bar

@mikewinchester3185 2 жыл бұрын

@@jansaari1047 use a breaker bar and 14mm socket (I think ) to move belt forward to go around pto pulley if you forget to use his tip

@havok_1957 2 жыл бұрын

He mentions, in on screen text, that the last part of the video was from an older video. That's why the belt is off the front pulley when he fits the front bar back on. He just wanted to show the viewers that the front bar has a washer behind the pin.

@DerekFickes Ай бұрын

I actually didn't I need my belt replace it's just that I needed to get back on all the

@DerekFickes Ай бұрын

What I meant to say was I actually I needed to get my belt back on the police

@larryscarry411 Ай бұрын

But your belt was ready to break and it was a little short they say that they don't actually stretch they only get skinnier and wear out or too sloppy. Just saying from a video done by a mechanic that fixes them all the time for a company. Oh at the end of the video your belt wasn't on the pulley anymore why was that? Otherwise it was a good video I've had to change my spindle before and this was a great refresher video for me thank you very much, and glad people like you are making them do it yourselfers!!!!

@brucegaylord2430 2 жыл бұрын

seriously! at the end the belt wasn't even connected. LOL

@HowToWithJames 2 жыл бұрын

I think i said this in the video but part of that footage was taken from another video i already did. I didn't think i needed to film that same part again. Just try to look past that part of the footage 😁

@josephi1047 2 жыл бұрын

Nothing about the belt tensioner.

@HowToWithJames 2 жыл бұрын

It's been a while since I made this video but if I remember correctly it is automatically done because it is spring tensioned. What did you want to know about it?

@bobstrat9202 Жыл бұрын

I bet you carnt show how to replace a deck belt to 2026R

@williemanning9229 3 жыл бұрын

1 Q in

@dannytrent5447 Жыл бұрын

Mf'ing commercials!!!!!!!!!!!

@mike1968442 3 жыл бұрын

Tfs. This is the worse lawn mower my money has ever bought! Its a total piece of shit! I cant say how many times I had to replace the belt and or fix tires.