You're the first person I've seen that has actually addressed the fact that driving pocket screws shifts the alignment. Not only did you say that it happens, you showed you're solution. Minor, I know, but thorough... Thank you.
@JohnBuildsIt3 жыл бұрын
Thanks for watching! 👍🏽
@LincolnWoodworks Жыл бұрын
Agree, thanks for the pro tip on the pocket hole's!
@michaelgrimes88283 жыл бұрын
I love how you did the legs. Great idea to batch two of them together.
@JohnBuildsIt3 жыл бұрын
Thanks for watching!!
@dlerhajiagha Жыл бұрын
The comments and advices during work are so benefit, I liked that, and nice grey color......Good job.
@JohnBuildsIt Жыл бұрын
Thank you!
@sanramondublin Жыл бұрын
My first time on your channel. Thanks for detail explanation. Basically you shared your experience with your audience. Greetings from California
@JohnBuildsIt Жыл бұрын
Thanks for watching!!
@guybowers90943 жыл бұрын
Absolutely gorgeous.my son bought a 1916 home and I'm going to build them a dresser similar to these out of some of the wood we removed during remodeling of his home. These are just really nice man
@JohnBuildsIt3 жыл бұрын
That’ll be sweet man! Thanks for watching 👍🏽
@danielwood47863 жыл бұрын
Great job. I love how you use accessible materials
@JohnBuildsIt3 жыл бұрын
Thanks for watching!
@aaronkaye33843 жыл бұрын
The whole suite turned out amazing! Love your videos!
@JohnBuildsIt3 жыл бұрын
Thank you!!
@taylorscott96053 жыл бұрын
Love all the tips throughout! So pretty!
@JohnBuildsIt3 жыл бұрын
Thank you!
@burlshepherd445 ай бұрын
best 3 videos for a complete bedroom suite. downloaded all three, can't wait till the weather breaks so i can make them for our new house.
@JohnBuildsIt5 ай бұрын
Thank you!!
@sashqa0 Жыл бұрын
I'm sold
@nikkihopson53623 жыл бұрын
They turned out so beautiful!
@JohnBuildsIt3 жыл бұрын
Thanks!!
@keithmuset65103 жыл бұрын
Man it’s good t see Payton Manning has found a life after football. Psych just playin.😁😁😁 love your work, definitely subscribed.
@JohnBuildsIt3 жыл бұрын
I don’t see the resemblance but have gotten that comment a lot haha
@keithmuset65103 жыл бұрын
@@JohnBuildsIt your voice is very similar to his. It's a good problem to have. Everyone tells me i sound like Seth Rogan. So naturally, I don't have a KZfaq channel😁😁😁
@richs54223 жыл бұрын
Nicely done. Fully captured drawer bottoms makes sense. 1/2" plywood with a 1/4" rabbit utilizes most of the (otherwise wasted) bottom space and makes them really strong.
@dirtybaywoodshop-joeporter56503 жыл бұрын
John these dressers are beautiful! I will be building one for myself and my son very soon and I really like the style of these. That grey top on the white base looks fantastic! Can't wait to pick up the M12 pin nailer, too. I've heard nothing but good things about it so far. Thanks for more great content, John! - Joe
@JohnBuildsIt3 жыл бұрын
Thanks for watching! Highly recommend the pinner!!
@plasmac92 жыл бұрын
The tops for this entire series are really nice. I love the contrast against the white. Well done.
@JohnBuildsIt2 жыл бұрын
I think so too, the grain in the ash looks so good stained up!
@jacobwright78903 жыл бұрын
I absolutely love your work man
@JohnBuildsIt3 жыл бұрын
I appreciate it man!
@John.1173 жыл бұрын
Perfect. I'll be buying the plans later (when the price of wood comes down) - so I can build all of these pieces for my home. Simple but elegant. Excellent work! Thanks for sharing.
@JohnBuildsIt3 жыл бұрын
Awesome man thanks for watching!
@timothybrown14332 жыл бұрын
Nice work
@JohnBuildsIt2 жыл бұрын
Thanks man!
@ericorange4412 жыл бұрын
Very nice
@JohnBuildsIt2 жыл бұрын
Thanks!!
@Caronidandf Жыл бұрын
Awesome
@JohnBuildsIt Жыл бұрын
Thanks!
@JyB8183 жыл бұрын
In the words of Borat...very very nice!
@JohnBuildsIt3 жыл бұрын
Haha thanks!!
@andrewhenry40853 жыл бұрын
Excellent work... You deserve every view.
@JohnBuildsIt3 жыл бұрын
Thank you I appreciate it!
@trinesandns49473 жыл бұрын
These dressers are amazing!
@JohnBuildsIt3 жыл бұрын
Thank you!!
@robertburns3020 Жыл бұрын
Looks fantastic
@JohnBuildsIt Жыл бұрын
Thank you!!
@3dmazter2 жыл бұрын
very nice.
@JohnBuildsIt2 жыл бұрын
Thank you!!
@K4katwc3 жыл бұрын
Wow! Beautifully done!
@JohnBuildsIt3 жыл бұрын
Thanks a lot Kathy!!
@tshepomorake77102 жыл бұрын
Pretty awesome job John.
@JohnBuildsIt2 жыл бұрын
Thank you!
@mprumsey3 жыл бұрын
Great Job, they came out beautiful.
@JohnBuildsIt3 жыл бұрын
Thank you!
@patnodus3 жыл бұрын
I'm looking forward to my next project to try your finishing techniques. Your finish looks amazing!!! I like the white and grey contrast!
@JohnBuildsIt3 жыл бұрын
Awesome, thanks for watching!
@lynjermey64233 жыл бұрын
Absolutely beautiful quality work.
@JohnBuildsIt3 жыл бұрын
Thank you!!
@angolazesto71223 жыл бұрын
So beautiful!
@JohnBuildsIt3 жыл бұрын
Thank you!
@michaelbugin49272 жыл бұрын
Nice projects
@JohnBuildsIt2 жыл бұрын
Thanks!!
@michaelbugin49272 жыл бұрын
@@JohnBuildsIt what are the measurements for the dressers? Length,width and height
@Eric-bh6ie2 жыл бұрын
very nice! thinking ill buy ur plans for this build... thx for sharing
@JohnBuildsIt2 жыл бұрын
Thanks for watching!!
@carlrubel71653 жыл бұрын
Always enjoy watching your work. Gives me great ideas for my future builds.
@JohnBuildsIt3 жыл бұрын
Awesome, thanks for watching!
@davidmarshall61883 жыл бұрын
Another great video thank you fir what you do
@JohnBuildsIt3 жыл бұрын
Thanks for watching!!
@toomars13013 жыл бұрын
Once again, excellent work!! Very enjoyable, and wonderfully practical wood working tips and designs...THANKS!!
@JohnBuildsIt3 жыл бұрын
Thanks for watching! 👍🏽
@HowIDoThingsDIY3 жыл бұрын
Great job! Amazing cabinets!
@JohnBuildsIt3 жыл бұрын
Thank you!
@billgorman45673 жыл бұрын
Very nice! It's refreshing to see quality work WITHOUT any Festool products. Folks, you can do this fine work without falling prey to the overpriced equipment!!
@JohnBuildsIt3 жыл бұрын
For sure! Although I would like a festool sander 😂 haha
@mattbowers53423 жыл бұрын
Those look great John, enjoyed the series!
@JohnBuildsIt3 жыл бұрын
Thanks Matt!
@andre.l.45743 жыл бұрын
Verry nice job, wow
@JohnBuildsIt3 жыл бұрын
Thanks!!
@patniemczyk88603 жыл бұрын
Nice work as always John, they look great!!!
@JohnBuildsIt3 жыл бұрын
Thanks Pat!
@TeamProsperity2 жыл бұрын
Damn John, great job, just not fond of the plywood fronts tho. I like solid fronts, using 1/4” birch ply for bottoms 1/2” birch ply for sides dovetailed but on the master build i’m getting ready to do I’ll use 21/32 spruce pine for the drawer sides. I like your design and love the gray top and white contrast looks great, great video, thanks
@joelhoeksema3 жыл бұрын
Great build!
@JohnBuildsIt3 жыл бұрын
Thank you!!
@Wild_bears3 жыл бұрын
Love your job!
@JohnBuildsIt3 жыл бұрын
Thank you!
@kathyphetteplace60533 жыл бұрын
Very informative wonderful video!
@JohnBuildsIt3 жыл бұрын
Thanks for watching!
@peterfitzpatrick70322 жыл бұрын
I really love your building process John, it seems quite formulaic, lots of similarities in the construction of your furniture. I say that as a compliment as it helps others getting started in woodworking to not feel overwhelmed by overly complicated builds. Once one has made , for example, the blanket box, one now has the skills & experience to tackle something more impressive like the chest of drawers or the bed you made. Subbed a while back now & always look forward to your videos.. 🤗 From the Emerald Isle 😎👍☘️🍺
@JohnBuildsIt2 жыл бұрын
I appreciate it, that’s the goal!!
@jimmyr44483 жыл бұрын
Thats looks awesome 👌
@JohnBuildsIt3 жыл бұрын
Thanks!!
@AngieWilliamsDesigns3 жыл бұрын
These look amazing. Hope we get to see the whole room put together. Really enjoying these videos.
@JohnBuildsIt3 жыл бұрын
Do you have Instagram?? I totally failed at showing the whole set together here in the video, but I’ll be sure to over there on IG!
@AngieWilliamsDesigns3 жыл бұрын
@@JohnBuildsIt yep. I sure do. I already follow you over there. That's how I found your KZfaq channel. It's getstartedmaking
@JohnBuildsIt3 жыл бұрын
@@AngieWilliamsDesigns awesome, I recognize the name now! 👍🏽
@timgwaltney47933 жыл бұрын
Nice work!
@JohnBuildsIt3 жыл бұрын
Thanks man!
@paramediclee13 жыл бұрын
Very nice work John! I enjoy your videos a lot. Keep up the great work!
@JohnBuildsIt3 жыл бұрын
Thank you!!
@FATDADSLIM2773 жыл бұрын
Hey great channel. How about a video on what tools etc you have in the shop and which ones every novice should have.
@jonathanbrowne8884 Жыл бұрын
I've just started watching your channel and love these videos! Beautiful work!
@JohnBuildsIt Жыл бұрын
Thank you!!
@lwood83 жыл бұрын
Awesome!
@JohnBuildsIt3 жыл бұрын
Thank you!!
@elinabalibado59823 жыл бұрын
I'm a new subscriber i like your ideas and easy to learn than you from sharing your work its amazing skill.. GOD BLESS YOU...
@JohnBuildsIt3 жыл бұрын
Thanks for watching!!
@geicokaveman57073 жыл бұрын
Really nice! Hope to someday soon be able to do this myself.
@JohnBuildsIt3 жыл бұрын
Thanks for watching!!
@geicokaveman57073 жыл бұрын
@@JohnBuildsIt are you happy with your makita cordless track saw?
@markarita33 жыл бұрын
Excellent work John, I love the way you work. Nice "card trick" @ 17:27 ;-)
@JohnBuildsIt3 жыл бұрын
Thanks for watching!!
@Fixbuildflip-Dustin-Boettcher3 жыл бұрын
Love your builds man, just started my channel. Sadly it was in the middle of moving but ill get to making more posts. New to creating content but my wife follows you on Tik-tok and now since we have a new house she wants me to build all now bedroom furniture with your plans. Already purchased them and im going to start the builds soon and ill be making a video for them! Definitely going to give the credit where its due. Thanks for being awesome brother
@JohnBuildsIt3 жыл бұрын
That’s awesome man I appreciate it, can’t wait to see them!
@Fixbuildflip-Dustin-Boettcher3 жыл бұрын
Ill tag you and give you a shout, i uploaded my first video the other day, not the best but we have to start somewhere. Channel is Fixbuildflip
@redscortgt933 жыл бұрын
Great work. Love the channel. Also! I agree 100% on the edge banding lol ughh
@JohnBuildsIt3 жыл бұрын
Longest step of the build by far! Haha
@redscortgt933 жыл бұрын
@@JohnBuildsIt yes! Lol
@AVHANDYMANPROFESIONALSERVICES3 жыл бұрын
Great work bro.
@JohnBuildsIt3 жыл бұрын
Thank you!
@JoseAndrade-ic7er3 жыл бұрын
I love how much the grains pops on the top. Are those pine boards you used for the top?
@JohnBuildsIt3 жыл бұрын
No it’s ash 👍🏽
@zebalewski13 жыл бұрын
Good stuff! Thank u!
@JohnBuildsIt3 жыл бұрын
Thanks for watching!
@oleksandrdubyna39923 жыл бұрын
Hi, like from Ukraine!
@martriguez20052 жыл бұрын
love your videos i wish plans were cheaper or free for the poor people like me lol
@jamesm90573 жыл бұрын
nice dresser bro
@JohnBuildsIt3 жыл бұрын
Thanks man!
@rbwoodwork18909 ай бұрын
Good videos! I made the bed from your plans (I used clear fir instead of the MDF) but it turned out great. Wife loves it. The dressers (chest of drawers) I’m doing next the night stands. Thanks for such clear instructions. By the way, HD doesn’t carry the crown molding where I live.☹️
@JohnBuildsIt9 ай бұрын
Ah bummer! We’re you able to order it or find some different but same size?
@rbwoodwork18908 ай бұрын
@@JohnBuildsItI ended up making my own molding with my CNC. Just matched the profile from pictures from HD web site. I’m making them out of Alder. I also made the drawer boxes with half inch plywood using the quarter quarter quarter method but plan on using the drawer lock bit when I get to the dressers (chest of drawers). The wife corrected me that dressers are wide and chest of drawers are tall.🤔 I did look that up and she was right, dang it! 🤷🏻♂️
@callyscraftycorner246310 ай бұрын
I love this!! Question: have you ever done a cabinet door like those draw face? I love the look, will it work for kitchen cabinets?
@JohnBuildsIt10 ай бұрын
I haven’t, but definitely could!
@texasmike79942 жыл бұрын
This set bed set has turned out awesome, elegant and simply beautiful Why do you dado the outer edge of the side panels?
@JohnBuildsIt2 жыл бұрын
To recess the back panel so you can’t see it
@wayneosteen15393 жыл бұрын
Great work! You should create a plan "bundle" to get the whole suite of plans together.
@JohnBuildsIt3 жыл бұрын
I thought about it but I think I’m cutting myself short price-wise already for how detailed they are and compared to other peoples prices. So even $24 for all 3 is already a great price. I probably should’ve charged 10 each, or bundled for like 25! Haha thanks for watching 👍🏽
@wayneosteen15393 жыл бұрын
@@JohnBuildsIt Very true, I wasn't even thinking of the already low cost. You do amazing work! Keep it up. :D
@leiwa1003 жыл бұрын
Only $8 each? I'd probably not hesitate paying $20 each. Bundle all three for $50.
@chrisroyak44793 жыл бұрын
Great looking bedroom set! As always, a demonstration video chockfull of helpful tips and lessons-learned! #letsgetintoit
@JohnBuildsIt3 жыл бұрын
Thanks man! I might need a t shirt that says that on it 😂
@chrisroyak44793 жыл бұрын
@@JohnBuildsIt If you do... send me one! 😂😂
@CarlsontheOutdoorsman3 жыл бұрын
Hi John! Top-notch work! Any chance you can share how tall the drawers are? Trying to determine if your plans will work for my storage needs or if I would need to make adjustments. Thanks!
@kayfabe5913 жыл бұрын
Do you sign and date your masterpieces? Much appreciated that you always give thorough explanations and generous helpful hints. Any outdoor projects scheduled...like, maybe a kiddie picnic set, child's rocker, or tot activity table?
@JohnBuildsIt3 жыл бұрын
I try to sign everything if I remember! My daughter isn’t quite big enough yet but I’m sure I’ll be doing some outdoor stuff like that next summer!
@kayfabe5913 жыл бұрын
@@JohnBuildsIt Cool. Our big fam is booming (neices/nephews having babies), so hoping to learn of fine builds for kiddo gifts. Been awhile since I crafted in the smaller scale. My only had her first baby 11 years ago, and the second, 7 years ago. Grandkiddies (yep, all little kiddies, of course) = precious 🎁🎁!!
@TheBengstonWoodshop3 жыл бұрын
Love it brother! Are you doing the builders challenge? I think I'll give it a go
@JohnBuildsIt3 жыл бұрын
Thank you! No I won’t have time to unfortunately
@wondon2992 Жыл бұрын
Watching this video really frustrates me bc it reminds me we don’t have a fuel biscuit joiner yet!
@JohnBuildsIt Жыл бұрын
Dewalt did so I’m sure they’ll follow up with one soon haha
@malonecustomdesigns3 жыл бұрын
Beautiful work. One day I will be confident enough to build something with drawers lol. What was the bondo on the plywood edge for?
@JohnBuildsIt3 жыл бұрын
They’re the drawer fronts. Just to fill in any imperfections in the plywood, flawless after finishing 👍🏽
@malonecustomdesigns3 жыл бұрын
@@JohnBuildsIt so you bondo then edge band? Or just bondo?
@JohnBuildsIt3 жыл бұрын
@@malonecustomdesigns just bondo on those, edge banding on the drawer boxes. I’m not a fan of painting edge banding, doesn’t look as good as just using the bondo
@malonecustomdesigns3 жыл бұрын
@@JohnBuildsIt Thanks! I've never used bondo or edgebanding! lol
@MoniGhaleyDIY Жыл бұрын
Hello sir. How is the Sher wood kem paint? U mention u loved the Bin primer on the other video. I been using the Bin primer but I hate cleaning it. Please let me know. Awesome video by the way.
@JohnBuildsIt Жыл бұрын
It works great, really like it!
@JimFrye1 Жыл бұрын
Question... I bought the plans for this. What type of 3/4" plywood?
@JohnBuildsIt Жыл бұрын
I like maple for painted projects
@davidbranco8553 жыл бұрын
Any hints/tips on how to measure for where to put your drawer slides on something like this?
@JohnBuildsIt3 жыл бұрын
I put my slides on the bottom edge of the boxes, so after just figuring out where the bottom drawer needs to be I evenly space the rest of them. I can’t think of any tips really, just measure it out 👍🏽 honestly it doesn’t even matter, as long as each side is the same, I just like them to all be even
@kbrown68193 жыл бұрын
Great looking dressers. How many times do you sand between applying coats of paint? And did you Shellac the dressers also?
@JohnBuildsIt3 жыл бұрын
I sand between every coat. The white poly is the top coat, no shellac 👍🏽
@terrencehemperly19363 жыл бұрын
John, you list BIN Primer in your materials list but you show Sher-Wood Kem Aqua plus in your video. Which do you prefer?
@JohnBuildsIt3 жыл бұрын
Undecided so far. They spray and sand similar(great),but the BIN definitely blocks the yellowing from wood tannins better, but it’s more of a pain to clean the gun. And the kem Aqua was a pain to get here around me. Pros and cons to each haha
@ShopTherapy6233 жыл бұрын
How do you like spraying that White Poly? Get a super nice smooth surface? I just bought a Fuji 5 stage (similar to your setup). Trying to decide what white finish I want to put on my projects
@JohnBuildsIt3 жыл бұрын
Beautiful, factory sprayed quality finish man. Definitely worth a try👍🏽
@ShopTherapy6233 жыл бұрын
@@JohnBuildsIt nice! Have you ever sprayed conversion varnish?
@razorbackstacker60Ай бұрын
I was wondering what brand of edge trimmer are you using?
@JohnBuildsItАй бұрын
I wouldn’t recommend that one. This is what I like using now amzn.to/3LFwRYf It is cheaper at Menards if you have one in your area
@aottaviano13 жыл бұрын
Great work and video, John! I’ve seen you spray finishes with both HVLP and airless. Do you have a preference? Thanks!
@JohnBuildsIt3 жыл бұрын
HVLP for woodworking/furniture projects for sure👍🏽
@TeamProsperity2 жыл бұрын
BTW John how you liking that Mikita track saw?
@JohnBuildsIt2 жыл бұрын
Love everything about it, it’s been great 👍🏽
@1980mikemore3 жыл бұрын
Did you edge band the perimeter of the plywood drawer fronts?
@JohnBuildsIt3 жыл бұрын
Bondo
@frankj59472 жыл бұрын
Wondering why the top is made from 4 pieces glued together vs. a single panel cut to size. Also did that with the toy box episode. Is it for expansion and contraction reasons or other? Thanks
@JohnBuildsIt2 жыл бұрын
Pretty impossible to find a single piece that wide haha
@frankj59472 жыл бұрын
@@JohnBuildsIt so it is not plywood but solid? That would make sense!
@rgmf1423 ай бұрын
Good Evening John, I just purchased your plans to build some dressers for the family. I just had a quick question. Was there a specific plywood you bought from Home Depot or Lowes? Please let me know. Thank You.
@JohnBuildsIt3 ай бұрын
Maple or birch 👍🏽
@rgmf1423 ай бұрын
@@JohnBuildsIt thank you, please disregard the email I sent to you not too long ago through your business site.
@TheHomeMaker13 жыл бұрын
The real wood filler bondo has real wood fibers in it so it sands and stains much much better and matches the real wood around it much better it’s really for when you need to fill something that’s going to be stained and clear coated and needs to blend in and match exactly for anything that’s being painted the old school regular bondo is the way to go it’s much cheaper and dries super quick and is easy to work with I have been using both for years and it’s worth it to keep both in the shop just try it out when you do you will never use any wood filler from the big box stores or hardware stores ever again the bondo bondo wood filler and & Minwax high performance wood filler which is just bondo with real wood fiber also is the best things to use on wood period
@JohnBuildsIt3 жыл бұрын
Good to know! Seems like everything people want nowadays is painted haha so the regular bondo is the way to go
@bsc6132 жыл бұрын
how tall is your dresser? its very beautiful
@JohnBuildsIt2 жыл бұрын
Thanks! 48”
@brandonleneave46512 жыл бұрын
What table saw is that? Also what are those things called that you set the foam insulation on?
@JohnBuildsIt2 жыл бұрын
Ridgid r4512 and the table is the bora centipede. Both linked in the video description 👍🏽
@andrewsmyth36933 жыл бұрын
Would I be able to ask what the total cost in materials that is for the dresser?
@JohnBuildsIt3 жыл бұрын
Off my head I’d roughly guess 250
@craigsharp42933 жыл бұрын
How do you get the measurements for where your drawer slides will be mounted in the box? Are each of the drawers unique once you put the fronts on? Meaning can they go in any order if removed or should they be placed back in the original order top to bottom?
@JohnBuildsIt3 жыл бұрын
I just measure it out man not sure how else to really describe it haha. Now that I’m making plans I do it and evenly space them on the computer. I do label the back of the drawers so they always go in the same spot but technically it shouldn’t matter and they’re all the same
@Connr_-vj7iv2 жыл бұрын
Love the videos! I just found your channel and watched a lot of them back to back haha. I just wondered where you ordered your white insert for your table saw? If you could let me know that would be awesome thanks!
@JohnBuildsIt2 жыл бұрын
Haha thanks! Here’s the link amzn.to/3c2uIns
@scardera2 жыл бұрын
@JohnBuildsIt2 жыл бұрын
I appreciate it!
@cjddesignsllc58683 жыл бұрын
Might have missed it but where did you get your edge band trimmer from?
@JohnBuildsIt3 жыл бұрын
Oh my bad! It’s from home depot
@dstamey3292 жыл бұрын
Forgive me for my ignorance, I'm still learning. But why do you notch the ends of the sides and bottom panels to join them. Why not pocket hole screw them like the drawers? And again, this is a genuine question. Is the notched joint stronger? Then if so, why not notch the drawers as well?
@JohnBuildsIt2 жыл бұрын
I’m not sure completely what you’re referring to. I think you’re talking about the rabbet it cut in the sides and bottom. That’s for the back panel to sit inside flush, as opposed to being able to see the plywood edge from the side. The joinery here is simply screws since they’re covered by the trim anyway. Hope that helps!
@dstamey3292 жыл бұрын
@@JohnBuildsIt yes Sir, thats what I'm referring to. I'm just wondering, why not use pocket holes to join those pieces just like you do with the drawers? I would like to be able to build one of these, but I'd like to know which joint would be strongest.
@JohnBuildsIt2 жыл бұрын
I’m confused haha pocket holes to attach the back panel? It’s only 1/4” thick so that’s not possible. Pocket screws to join the main carcass is simply just unnecessary and an added step and you’d see them on the inside.
@dstamey3292 жыл бұрын
@@JohnBuildsIt haha I'm sorry! But yes, joining the main carcass (the side pieces to the bottom piece). And that answers my question, pocket holes would be unnecessary! Ok perfect! Thank you! I appreciate the videos!
@ShopTherapy6233 жыл бұрын
What kind of plywood do you use for your white furniture? Is this from Menards? Do you find that paints well?
@JohnBuildsIt3 жыл бұрын
Maple ply usually for stuff like this. Paints awesome
@ShopTherapy6233 жыл бұрын
@@JohnBuildsIt The Maple Plywood they stock at Menards? (D3 I believe?)
@JohnBuildsIt3 жыл бұрын
Yea! I have been getting it at Home Depot though lately with the price increases they’ve been way cheaper than menards
@bs8383 жыл бұрын
Do you have a router table? That leg detail might be a lot easier on a router table using a miter gage. Also, how do you get the inside offset of the faceframes exactly right so that those (I'm assuming 3/4"?) poplar spacers are perfectly flush when installing the drawer slides? I've tried doing that before and it's a huge pain in the ass, I end up having to go back and plane down or shim out the spacers to get them to align.
@JohnBuildsIt3 жыл бұрын
For sure, but none of my miter gauges work on my table. I don’t really have any secrets on that man haha sorry, just math and measuring precise. They’re 1/2” here, but yea on some projects with odd sizes I just run em through the planer to get the thickness I need
@bs8383 жыл бұрын
@@JohnBuildsIt Gotcha, thanks for the reply and awesome content
@Elkratosjr2 жыл бұрын
Where’s the video for the jig?
@JohnBuildsIt2 жыл бұрын
In the nightstands video
@tactical_dragon87333 жыл бұрын
do you have an estimate on how much each dresser cost? going with todays wood prices.
@JohnBuildsIt3 жыл бұрын
I buy slides, hardware, primer/paint, stuff like that in larger quantities for multiple projects so kind of hard to equate that part, but just for the wood and trim about $250. Definitely more than usual haha but not a deal breaker
@matthewgarey62403 жыл бұрын
Those look extremely high end and you make it look like nothing to it. If you weren’t to use legs how would you prop it up? Cabinet base type bottom?
@JohnBuildsIt3 жыл бұрын
Thank you! Could just set it right on the floor without legs, or yea build an apron style box under it and maybe cut a curve or something in the front👍🏽