Building TWO Vanities for half the price of buying JUST ONE

Building TWO Vanities for half the price of buying JUST ONE | With Build Plans!

Рет қаралды 814,624

4 жыл бұрын

Step by step how I built these two custom shaker style bathroom vanities.
36" Vanity Build Plans - www.johnbuildsit.com/plans/p/...
48" Build Plans - www.johnbuildsit.com/plans/p/...
Check out all my other build plans! - www.johnbuildsit.com/plans
Follow me on Instagram: @johnbuildsit / johnbuildsit
Facebook: / johnbuildsit
TikTok: tiktok.com/@johnbuildsit
Tools Used:
Bora Centipede Work Table - amzn.to/34D2CtQ
Diablo Plywood Blade - amzn.to/2R3NuSr or homedepot.sjv.io/07zRN
Bessey 50” Parallel Clamp - homedepot.sjv.io/3xmBM
Bessey 24” Parallel Clamp - amzn.to/33zBmee
Bessey 1/2” Pipe Clamp - amzn.to/2sn5soq or homedepot.sjv.io/P9nBR
Dustopper Dust Separator - homedepot.sjv.io/0J2zVO
Milwaukee M12 Fuel Hammer Drill & Impact gun - homedepot.sjv.io/eMjaQ or amzn.to/2OWb4h9
Ridgid Circular Saw - homedepot.sjv.io/P9nBN
Ridgid R4512 Table Saw - homedepot.sjv.io/7QAqQ
Ridgid Jig Saw - homedepot.sjv.io/eMjJD
Bosch Aluminum Router Table - amzn.to/35JDim3
Bosch 2.25HP Router - amzn.to/34CzZwQ
Freud Tongue & Groove Router Bits - amzn.to/35ShPaN
Kreg K5 Pocket Hole Jig - amzn.to/33AHD9E
Kreg MultiMark Measuring Tool - amzn.to/33yioF0
Kreg Cabinet Hardware Jig - homedepot.sjv.io/Z1Eqg or amzn.to/2L7B9IV
Kreg Concealed Hinge Jig -homedepot.sjv.io/WaEgZ or amzn.to/37PRHit
Kreg Right Angle Clamp - homedepot.sjv.io/bzQqb or amzn.to/2OQ0PL6
Kreg Face Clamp - homedepot.sjv.io/3xzRk or amzn.to/2OVEY5g
Ridgid 12” Sliding Miter Saw - homedepot.sjv.io/vOLkj
Ridgid Miter Saw Stand - homedepot.sjv.io/NmdW2
Earlex 5500 Spray Station - amzn.to/2OWd8Wr
Starbond CA Glue - amzn.to/33Bsa9b
Edgebanding Trimmer - amzn.to/2OVgMjo
Ridgid Jointer - homedepot.sjv.io/53Y0b
Ridgid Planer - homedepot.sjv.io/P9nYX
General Finishes Snow White Milk Paint - amzn.to/2R64qaO
Zinsser BIN Primer - amzn.to/37PWVL6
DryDex Spackling (used for filling nail holes) - amzn.to/2L5Z7UR
Ridgid Brad Nailer - homedepot.sjv.io/OQLEP
20” Soft-Close Drawer Slides - amzn.to/2L8ocP7
Drawer Pulls - amzn.to/2L7Cpf7
*As an Amazon & Home Depot Associate I earn from qualifying purchases made through links on this post.

Пікірлер: 1 300

@JohnBuildsIt 3 жыл бұрын

Full build plans are now available for both the 36” and 48” vanity! www.johnbuildsit.com/store

@MrRahluv357 2 жыл бұрын

John I did but your plans abs they were a great help. Thanks again

@thomaslaws6483 2 жыл бұрын

Just bought one hell ya. Love your work. This is going to be first time build for me.

@deanowright359 2 ай бұрын

watched this video over and over. finally woke up and bought it this morning. bought plywood and poplar yesterday from lumber yard. starting the build today!

@deanwood51 4 жыл бұрын

Here I learned a trick from a kid after 35 years and never gave it a thought. I love the corner blocks. Those corner block aesthetics truly set these cabinets off. Really good job kid. You earned a subscriber...

@JohnBuildsIt 4 жыл бұрын

Dean Wood haha thanks a lot I really appreciate it!

@dominicbianco3826 4 жыл бұрын

I like the corner blocks nice touch

@michaelmatchee 4 жыл бұрын

agreed, nice touch and that little extra piece really adds to the build. pinky toe saver hahaha.

@booifojoe 4 жыл бұрын

@@dominicbianco3826 First thing I noticed. Really draws the eye. Nice.

@ainnoon2 4 жыл бұрын

because of your comment, he has earned another subscriber.

@EastRiverHomestead 4 жыл бұрын

Oh! Love the toe kick. Simple design that is easy to clean around.

@raulsoto2088 2 ай бұрын

Me encantan tus trabajos... Tu estilo, limpio, ordenado, detallista.. veo una y otra vez tus videos.. te felicito, un saludo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

@stevenrago7632 4 жыл бұрын

This is the first video of yours that I've seen, I have to say that you are indeed a skilled mechanic. Your idea for the toe kick has actually found its way on a project of mine, so thank you for the idea. I always try to find different designs to use and this one clicked right away. I look forward to seeing what else your minds eye creates.👍

@JohnBuildsIt 4 жыл бұрын

Steven Rago that’s awesome! Thanks for watching man!

@richbaker8211 4 жыл бұрын

That toe kick look is absolutely brilliant, love it! Will absolutely be using it on my projects in the new year. Thanks from the UK!

@JohnBuildsIt 4 жыл бұрын

Thanks for watching!!

@karencurtis2697 4 жыл бұрын

Wish he was from the Uk could buy products from store we have here. I'm so impressed

@abladd 4 жыл бұрын

Thanks for showing the steps clearly & concisely with shortcuts to completion that don't compromise the structure of the cabinet! Your finished project looks great. My family has many custom woodworkers, including myself, & there are way too many DIY shortcuts that end up being horrible long term "solutions".

@JohnBuildsIt 4 жыл бұрын

Absolutely true! Thank you!!

@tommywalker5348 4 жыл бұрын

I'm in the tile trade and watching you reminds me of how much I enjoy my line of work and your attention to detail 👌

@JohnBuildsIt 4 жыл бұрын

Thanks a lot man!

@plumberpsa3512 4 жыл бұрын

to help keep the foam insulation on the table when cutting down the full sheets, use some of the command strips for hanging posters. They're removable and hold well enough to keep it from slipping around.

@ONEpocketKID21 4 жыл бұрын

Great vid, incredible skills!! Love the little tip about putting the clamp on the diagonal to square up before screwing too!

@JohnBuildsIt 4 жыл бұрын

Thanks for watching!!

@lionelhernandez34 4 жыл бұрын

New twist in the tow kick I like it alot actually, thanks for sharing

@JohnBuildsIt 4 жыл бұрын

lionelhernandez34 thanks for watching!

@deanowright359 2 ай бұрын

watched this video over and over. finally woke up and bought it this morning. bought plywood $36 per 4x8 and poplar $1.75 sq ft yesterday from lumber yard. starting the build today!

@JohnBuildsIt 2 ай бұрын

Awesome!!

@40goose40 4 жыл бұрын

You make it look easy! However, you also do a great job explaining everything. And you show some tips and tricks that are absent in other woodworking videos. Thanks! Subscribed.

@JohnBuildsIt 4 жыл бұрын

Thanks a lot i appreciate it!!

@tesla_3_performance 4 жыл бұрын

Imagine being able to just build any furniture you see instead of buying it 😮I'm just getting into carpentry myself, built a pump house and deck so far 👍

@shaynesimpson7131 4 жыл бұрын

Would love to see the build plans, thank you.

@nunyabizness3890 4 жыл бұрын

Wow, these are amazing! I do like that 45-degree piece on the corners of the toe kick. I think it adds to the design and makes for a more classy look.

@JohnBuildsIt 4 жыл бұрын

Nunya Bizness I agree! Definitely a more custom look. Thanks for watching!

@holdemNE1 4 жыл бұрын

14:12 Very nice tip. Thanks for showing. And yes, I really like the 45 degree toe kick addition.

@JohnBuildsIt 4 жыл бұрын

Thank you! 🙌🏼

@randyrandolph9709 4 жыл бұрын

Toe kick is awesome whole build is sweet nice job

@JohnBuildsIt 4 жыл бұрын

Thank You!!

@giovannibarresi7277 4 жыл бұрын

Wow, looks awesome. Your work is amazing! Love the video. Oh and the toe kick mod is a great addition

@JohnBuildsIt 4 жыл бұрын

Thank you!!

@foinkle 4 жыл бұрын

Fantastic video! One of the few videos I've watched at normal speed instead of 1.5 or 1.75 speed! So clear and concise in all your explanations. Great, easy to see camera angles. And the end results are beautiful. Thanks!

@JohnBuildsIt 4 жыл бұрын

I appreciate that! 👍🏽

@Hateweek1984 3 жыл бұрын

I can dig it alot of good tips...went to school for trim carpentry and cabinetry...and am still learning I love woodworking...

@JohnBuildsIt 3 жыл бұрын

Thanks for watching man!

@locoken 4 жыл бұрын

All the "thumbs down" votes are actually cabinet makers who are upset they didn't think of half of the tips John uses in his videos. Nice work, John. I learned a thing or two and am glad I watched. Subbed as well. Looking forward to your other videos. (used to work with a cabinet maker and you have some good tricks of the trade that even I haven't been taught).

@JohnBuildsIt 4 жыл бұрын

Haha wow that’s crazy to hear! I appreciate it!! 👍🏽

@chuckblier 4 жыл бұрын

I agree with you.... I am a cabinet maker and was impressed with all the little measuring and placement techniques he uses... end result is great! nice work. Not everything has to be hand milled walnut and hand cut joinery to be a good build.

@isaacocasio3165 3 жыл бұрын

Let me start by saying that this was easily one of my favorite videos on building a cabinet. Simple, paced nicely, explained very well and the little extras were amazing. Just subscribed and can’t wait to see what else you’ve done. I. Also curious about the tops, where did you get the countertops from? Links?

@JohnBuildsIt 3 жыл бұрын

Purchased locally at Menards, couldn’t find a link, sorry!

@topredbirdfan Жыл бұрын

Phenomenal! I have built several vanities. Watching these tricks will save me a ton of time in the future. 👍🏻

@JohnBuildsIt Жыл бұрын

Thanks for watching!

@marissaandersen5572 4 жыл бұрын

Beautiful! I really like the toe kick, I've never seen it like that before!

@JohnBuildsIt 4 жыл бұрын

Marissa Andersen thank you!!

@amandasampson479 3 жыл бұрын

OMG your attention to detail is second to none! Love the toe kick and the handy tips for aligning and installing doors and drawers!

@JohnBuildsIt 3 жыл бұрын

Thanks for watching!

@2Peachcobler 4 жыл бұрын

Love your build. Wish you lived next door. I have a sewing room calling out for your expertise. Nice shop.

@JohnBuildsIt 4 жыл бұрын

Haha thank you!! 👍🏽

@trinesandns4947 3 жыл бұрын

Love the corner blocks on the toe kick!

@lorismith8887 4 жыл бұрын

Great video. Thank you. I feel much more confident that I’ll be able to complete my build now after using a few of your tips.

@JohnBuildsIt 4 жыл бұрын

Awesome!!

@ridelive6249 4 жыл бұрын

Two things: 1) I wish I had a garage like that. 2) I wish I had all those tools in a garage I wished I had in #1.

@CurmudgeonExtraordinaire 4 жыл бұрын

I wish I could just *find* the things in my garage... :)

@jaspermatty 3 жыл бұрын

me too and #3 the skills to build this stuff! Oh and #4, no fear of table saws and and routers.

@thewoodworkersjourney3314 4 жыл бұрын

After watching this I feel like I can make my own vanity...thank you!

@JohnBuildsIt 4 жыл бұрын

The Woodworker's Journey awesome!! Thanks for watching!!

@JohnBuildsIt 4 жыл бұрын

John McMahon drill, circular saw, Kreg jig. $100. There’s always cheaper/different ways to do things.

@baccus61 4 жыл бұрын

@@JohnBuildsIt And a good quality square. Everything turns out right and falls into place if you get it all square right from the very beginning. And lots of clamps or you will have to wait a few hours in between drying times if you only have a few.

@HM13. 4 жыл бұрын

One of the best woodworker on KZfaq. Literally all the project builds that has the looks of those furnitures from a high-end retailers 👍👍

@JohnBuildsIt 4 жыл бұрын

Thanks a lot!! 👍🏽

@chestnut250 4 жыл бұрын

Beautiful vanity! This is the first video I've seen of yours and, I have to tell you, very well made! You do an excellent job of explaining each step and the reason you perform the steps. Also, you speak very clearly and are well spoken unlike some DIY pages. I'm going to put your techniques to use when I tackle our hall bathroom remodel! I envisioned something very similar to what you just made for the sink vanity, but floating (i.e., not touching the ground... mounted directly to studs). Thank you for the time and effort in making this video! -Dan

@JohnBuildsIt 4 жыл бұрын

chestnut250 thank you for the feedback I appreciate it!!

@DONphantasmo 4 жыл бұрын

I've got to say, John. Amazing job. I love how simple this build is, yet gorgeous, elegant, and truly would look great in any bathroom. Yep, new subscriber here!!!

@JohnBuildsIt 4 жыл бұрын

Romeo's Relics thanks so much! 👍🏽

@-DIYPRO- 4 жыл бұрын

Looks awesome. Looks like Rigid sponsored the build, haha!

@JohnBuildsIt 4 жыл бұрын

Mech Master I wish lol too much free advertising huh!

@1982MCI 4 жыл бұрын

John Builds It how do you like your rigid jointer? I do a lot of cabinet work also and really need one for the rough cut lumber I use to build the doors with but haven’t been able to decide on brand yet. I’ve looked at rigid and it seems like it’s well built but have never used a rigid yet. Thank you and take care

@JohnBuildsIt 4 жыл бұрын

Don Pfeiffer I have no complaints with it, works perfect and the price was right! I’ll eventually upgrade, not because it’s poor quality, just because it’d be nice to have a bigger one for a lot of the stuff I make

@stevemoog3740 4 жыл бұрын

I’ve been making custom cabinets for a while now. Your video is great. The quality of the work shows some real potential. I did like the inside miter block. Nice detail. Kreig tools are awesome. Very quick and solid type work.

@JohnBuildsIt 4 жыл бұрын

Thanks a lot!! 👍🏽

@TwinWolfWoodworking 4 жыл бұрын

Great video. I happen to have the same table saw and the portable router table you have. You might be pleased to know that if you drop the plastic legs from the table, you can mount it perfectly in the table saws right side (the fence floats right over it as well). It provides more surface for the saw and serves as a convenient "small shop" feature.

@JoetheOK 4 жыл бұрын

Good job explaining things. Too often "how to" videos assume that everyone knows why you did something.

@JohnBuildsIt 4 жыл бұрын

JoetheOK thank you!! 👍🏽

@MP_Indy 4 жыл бұрын

@@JohnBuildsIt The tools list is great. Any chance of adding a materials list? I love the eye catching title "2 for the price of half" but I'd like to price what you used and I'm not even a full beginner yet.

@Alim_Hapov. 4 жыл бұрын

Великолепно, просто великолепно!

@nicknickpalad8798 3 жыл бұрын

@@JohnBuildsIt 0.

@vansage2691 4 жыл бұрын

What about the tops? Who made them? Nice build and the toe kick is a nice design

@JohnBuildsIt 4 жыл бұрын

Van Sage we bought them from Menards!

@corbinscharnhorst7415 4 жыл бұрын

Wow! I am a cabinet maker by trade and your attention to detail, organization, and cleanliness is great, man! Inspiring! I can learn a lot from watching guys like you!!

@JohnBuildsIt 4 жыл бұрын

Corbin Scharnhorst wow I really appreciate that, thank you!!

@NelsonReyesJr 4 жыл бұрын

Awesome job! All you need now is some dust collection for your DIY tracksaw.

@carolewarner101 4 жыл бұрын

Dang, I watched this to see you make those integrated concrete counter/sinks! Where's THAT video???

@JohnBuildsIt 4 жыл бұрын

Carole Warner haha they’re marble. BUT I will be doing a video next on pouring concrete kitchen counters!

@jaspermatty 3 жыл бұрын

His wife must be madly in love with him....and his skilz!

@ryanzenzen9088 3 жыл бұрын

Nice work! I like how simple, yet specific you explain your processes through your projects. Thanks!

@JohnBuildsIt 3 жыл бұрын

Thanks for watching!

@viluvaboy 4 жыл бұрын

Excellent work! These look better than the expensive cabinets in the big box stores and are clearly built stronger can’t wait to do this type of work myself!! Inspirational!

@JohnBuildsIt 4 жыл бұрын

Thanks a lot! 👍🏽

@mnight207 4 жыл бұрын

That toe kick looks really nice.

@JohnBuildsIt 4 жыл бұрын

Midnights & Mornings thank you!! 👍🏽

@marcelw6440 4 жыл бұрын

The thing I love about KZfaq is the wealth of knowledge and experience at your fingertips. I would've never thought to save scrap blocks of wood for future use to adjust ANY of my tools. Looks like I got a project for the week. Subscribed and followed on the gram.

@JohnBuildsIt 4 жыл бұрын

Thank you! 👊🏼

@MrBenjaminCole 4 жыл бұрын

Nicely done. Love the pocket holes.

@trippy1v349 3 жыл бұрын

I just lost any confidence I may have had in being a man after watching this video

@ShaunGuthrie-CaskWoodworking 3 жыл бұрын

Looking to build a vanity for our ensuite and came across this. Thanks for documenting your process!

@70sstreetracergal61 4 жыл бұрын

Okay. That toe kick SOO makes a statement! Love your work young man! 👍🏻

@JohnBuildsIt 4 жыл бұрын

OldGearheadChickipoo Racer thank you I appreciate it!!

@jens2763 3 жыл бұрын

These are gorgeous. I've been wanting to reface my kitchen and bath cabinets with mission style doors. And I love the kickplate.

@JohnBuildsIt 3 жыл бұрын

Thank you!

@samuelholmes1228 4 жыл бұрын

An awesome video John, you made it look so easy. Fantastic Job and great looking vanities as well.

@brucelutz5699 4 жыл бұрын

i have been doing the toe space detail for several years now & i have to say its nice to someone else doing it. mention to homeowners that its easier to clean floor.

@JohnBuildsIt 4 жыл бұрын

bruce lutz nice! I saw something similar on a cabinet at the store and scratched my brain for a minute figuring out how I should do it, and then it hit me and was all too simple! Haha love the look!

@jonw6376 5 ай бұрын

Very nice. Thank you. I like the 45° toekick.

@renesaenz7015 4 жыл бұрын

Awesome video! I'm going to try to built it myself. Thank you very much

@clementesolorzano7131 4 жыл бұрын

Wow, I've seen some videos on builds but your attention to detail is spot on. Great workmanship!

@JohnBuildsIt 4 жыл бұрын

Thanks a lot! 🙌🏼

@SteveGilbertson 4 жыл бұрын

This is excellent! Great work and it was extremely helpful despite my already "knowing" how to build one. Definitely keeping this for reference as I plan to build a couple vanities soon

@JohnBuildsIt 4 жыл бұрын

Awesome! Thanks for watching👍🏽

@ralphlivingston894 3 жыл бұрын

The mitered block attached to the toe kick is brilliant! It’s a huge aesthetic improvement. (I think even I could pull that off?) The small details are what change this from a really nice build...to an exceptional one! Great job, great idea and a really informative video. Thank you! (I just bought the Kreg clamp based on your recommendation!)

@JohnBuildsIt 3 жыл бұрын

Thanks a lot! 👍🏽

@garys9718 4 жыл бұрын

It definitely adds a nice little touch, of the kick panel

@jonathanking6546 3 ай бұрын

The toe kick detail is brilliant

@amysays3980 3 жыл бұрын

I really like and appreciate your attention to details. It shows pride in workmanship. Awesome toe kicks. Two thumbs up! 🥰

@JohnBuildsIt 3 жыл бұрын

Thanks a lot!!

@MP-yz6sb 4 жыл бұрын

Wow these turned out great. You make it looks so damn easy. I love watching custom stuff like this being built. And the corner pieces for the toe-kick add a final custom touch. Great choice with the solid surface top and sink.

@JohnBuildsIt 4 жыл бұрын

Thanks a lot!!

@MP-yz6sb 4 жыл бұрын

John Builds It you’re welcome. I wish o had your skill set. This looks fun to do and so rewarding. Beats the hell out of working in an office all day.

@Whois2440 4 жыл бұрын

You are a true craftsman. Great job! I look forward to when I get my house built and I can get back into the shop again!

@JohnBuildsIt 4 жыл бұрын

Thank you I appreciate that!

@codysett1 2 жыл бұрын

Block in the corners of the toe kick cleaned it up amazing

@JohnBuildsIt 2 жыл бұрын

🙌🏼🙌🏼

@richardmcinnis6626 4 жыл бұрын

one of the best videos I have seen in a while. Great job with your explanations. I plan to use a few of your tips in the video when i rebuild my bathroom vanities.

@JohnBuildsIt 4 жыл бұрын

Richard McInnis awesome!! Thanks for watching!

@MrJBM247 2 жыл бұрын

Love the toe kick! Finishing up a couple of night stands and I wanted to do something in the front but wanted to be mindful of being able to move them (they are pretty big) and wanted to be able to get a foot under it a bit. This would work. Simple but different detail. Perfect 👌🏾

@JohnBuildsIt 2 жыл бұрын

Awesome 👊🏼 thanks for watching!

@Shaleeyah123 3 жыл бұрын

This was about the best $8.00 that I ever spent! Since I don’t have a router table, I built the drawer fronts out of solid maple(gluing required). I really like the look. The Kreg drawer guides worked great instead of using scrap spacer pieces. I used 1/8” Strips of scrap wood under the drawer fronts as spacers. Because this was a first for me, I didn’t glue as many parts as you did, figuring that I might need to some steps over. GREAT PLANS AND ACCOMPANYING VIDEO! I’m a subscriber!

@JohnBuildsIt 3 жыл бұрын

Awesome man! Have sold quite a few plans but haven’t got any feedback yet so I appreciate it!

@MHTutorials3D 2 жыл бұрын

Great job

@DigitalN8v 4 жыл бұрын

I'm going to be rebuilding my grandparents kitchen cabinets and I'm totally going to use your toe kick style, I like the way it looks also....nice work.

@JohnBuildsIt 4 жыл бұрын

Awesome man!! 👍🏽

@rtkevans 4 жыл бұрын

Awesome build, nearly flawless! Because the vanities will be exposed to moisture, and will definitely get wet at least once when installing the sink plumbing, better protect the raw surfaces with poly. Also, a trick to trimming off the edge banding quickly is to just straight up sand the excess with a random orbital sander. No need to fuss with razor and sanding block!

@JohnBuildsIt 4 жыл бұрын

I’ll definitely give that a try next time! The way I’m doing it is way too time consuming haha thanks for watching!

@jjs811 4 жыл бұрын

They look good. Thanks for sharing

@JohnBuildsIt 4 жыл бұрын

jjs811 thank you! 🙌🏼

@JohnPatersonAu 2 жыл бұрын

Awesome! I need a new vanity and will be making this exact one. Thanks!

@JohnBuildsIt 2 жыл бұрын

🙌🏼🙌🏼

@7143179394 3 жыл бұрын

I really like the detail for the toe kick. Makes boring toe kicks look so much better

@JohnBuildsIt 3 жыл бұрын

I agree!

@scottallen606 4 жыл бұрын

Lots of good tips/tricks to keep things moving along quickly and efficiently . Thanks!

@JohnBuildsIt 4 жыл бұрын

Thanks for watching! 👍🏽

@danielbarrera55 3 жыл бұрын

i wish more videos like this, with plywood and forniture , is amazing your work !!!!

@acemany1126 3 жыл бұрын

Great job Johnny. Thanks for the tutorial.

@JohnBuildsIt 3 жыл бұрын

Thanks for watching!

@mikemeister458 4 жыл бұрын

I really enjoyed watching this. Thanks for taking the time to produce the content!

@JohnBuildsIt 4 жыл бұрын

Thank you!

@tkine97 4 жыл бұрын

Thanks for sharing! I like the kickplate corner blocks aesthetics also!

@JohnBuildsIt 4 жыл бұрын

Thank you!!

@terrystewart7341 Жыл бұрын

I love the look of that toe kick style. Very fresh looking compared to the old style that is used everywhere. Nice work and excellent video.

@JohnBuildsIt Жыл бұрын

I appreciate it thanks for watching!

@rickfenton2401 2 жыл бұрын

Just purchased 48” vanity plans.. excited to get started!

@JohnBuildsIt 2 жыл бұрын

Awesome, enjoy the build!

@Jetski270 4 жыл бұрын

Man this was a bad ass video. Thank you !!! Love how they came out and especially the toe kick corner.

@JohnBuildsIt 4 жыл бұрын

Thank you! 👊🏼

@bentswoodworking 4 жыл бұрын

Those are beautiful!

@JohnBuildsIt 4 жыл бұрын

Bent's Woodworking thanks man!!

@djsmootht6825 4 жыл бұрын

Love the quality of work and your attention to detail!

@JohnBuildsIt 4 жыл бұрын

Thank you! 👍🏽

@oscarsuarez7669 3 жыл бұрын

Nice job, thanks for sharing your knowledge.

@JohnBuildsIt 3 жыл бұрын

Thanks for watching!

@dougburke50273wind 3 жыл бұрын

Love your modified 45 degree toe kick corner returns.

@franka5416 4 жыл бұрын

Well thought out and executed. The corner blocks are a nice touch. Thanks for sharing.

@JohnBuildsIt 4 жыл бұрын

Thank you!!

@johnchisholm8994 2 жыл бұрын

That corner block is a killer add in... Love the look it gives as well. Good video!

@JohnBuildsIt 2 жыл бұрын

Thanks man!

@boatdetective 2 жыл бұрын

Elegant! 100% common sense. Well engineered. Excellent forethought in terms of jigs and alignment. Thank you!

@JohnBuildsIt 2 жыл бұрын

I appreciate it thanks for watching!

@carlwebinar1571 4 жыл бұрын

Excellent job on these vanities. Inspiring.

@JohnBuildsIt 4 жыл бұрын

Thank you!

@johnluniewski1791 4 жыл бұрын

Really enjoy your videos. Toe kick detail is super simple and easy and adds a whole nother level of quality and look. Great Job!

@JohnBuildsIt 4 жыл бұрын

Thanks a lot! 👍🏽

@budbuddington9624 4 жыл бұрын

I only read a few of the comments but like others have said, you did an amazing job explaining and showing how to build these vanities. The toe kick detail is definitely unique and I also really like it. Also first video I’ve seen of yours and I just subscribed.

@JohnBuildsIt 4 жыл бұрын

Bud Buddington thanks a lot I appreciate it!! 👍🏽

@jdizlle09 3 жыл бұрын

Great. Thank you so much. I have been looking for exactly this video, and I finally found it! You answered all my questions!

@JohnBuildsIt 3 жыл бұрын

Awesome thanks for watching!

@jonathanpopp3529 4 жыл бұрын

Love your idea for the toe kicks! Video was easy to follow and well explained. Thank you!

@JohnBuildsIt 4 жыл бұрын

Jonathan Popp thank you I appreciate it!

@rasmuskurten8455 4 жыл бұрын

Probably the 100th cabinet build video I've seen, and still learned a bunch! The gravity part was genius!

@JohnBuildsIt 4 жыл бұрын

Rasmus Kurtén thank you!! 🙌🏼

@wendywendy6270 3 жыл бұрын

Super excited idea 💡😆

@faizalnur1170 4 жыл бұрын

Good Explanation..and straight to the point...thx..Im from Indonesia.. terimakasih atas video nya sangat membantu..

@JohnBuildsIt 4 жыл бұрын

Thank you!!

@samuelibarracuevas4074 4 жыл бұрын

Great job.. also learned a few tricks thanks!

@Riegs36 3 жыл бұрын

Love how you build these and how you describe the build really great job. Also love the workbench nice and simple but let’s of room to build everything

@JohnBuildsIt 3 жыл бұрын

Thanks man!