Are TEMU Drills Junk?

Рет қаралды 255,841

Күн бұрын

I Torture Test TEMU Tools
I bought a pallet of TEMU power tools and put some of them to the test. We take the tools to some extremes with some fun and wild tests.
Grab yourself some Shop Shades - bit.ly/ShopShades_Unscrewed
Want to see more ?
I Bought A Pallet of HOME DEPOT RETURNS for CHEAP! - • I Bought A Pallet of H...
I Bought A Pallet of HARBOR FREIGHT RETURNS For CHEAP... Scam? - • I Bought A Pallet of H...
I Bought A Pallet of Lowes Tool Returns for $182.00....Mistake? - • I Bought A Pallet of L...
I Bought A Pallet of Walmart Tool Returns for $2,217...... Mistake? - • I Bought A Pallet of W...
I Bought A Pallet of Milwaukee Tool Returns for $975 - • I Bought A Pallet of M...
#temu #tooltest #testingtools

Пікірлер: 344

@ChristopherOBrienPSU 3 ай бұрын

Let's get a Temu vs Harbor Freight vs Amazon cheapest showdown!

@spedracer55 3 ай бұрын

harbor freight would destroy

@ChristopherOBrienPSU 3 ай бұрын

@@spedracer55I kind of agree. Maybe @JohnMaleckiUnscrewed can answer the age old question once and for all lol

@chadsmen2519 2 ай бұрын

Harbor Freight tools are amazing the baruer and hercules are just as good as dewalt and milwaukee

@asrr62 Ай бұрын

Amazon is gonna be the same as temu right. Drop shipped garbage but it's gotta be better than Ryobi.

@neeleydev2596 Күн бұрын

I agree

@refactorear 3 ай бұрын

Great mixture of the seriousness and data analysis from Project Farm and the Torque Test Channel and the carefree TylerTube testing!

@ryanj.leonhart2264 3 ай бұрын

You should for real build him a wooden truck bed, that would be badass!! Would love to see that!

@maddogshwa 3 ай бұрын

@hydrolisk1792 3 ай бұрын

I second this!!!!

@REV_AJ_RN 3 ай бұрын

Wooden truck bed!

@constructionlife5059 3 ай бұрын

7 to H. The best line ever

@ceefusjenkins2281 3 ай бұрын

As another large man, ladder limits are real. I have been told more than once that "that ladder is fine." That ladder is often not fine. Much like lawn chairs.

@korgan7779 3 ай бұрын

I feel this..

@Dustins_Woodworking 3 ай бұрын

It’s funny how delighted John gets trying to destroy/torture these tools. Great job.

@cabman86 3 ай бұрын

Well, he never grew up ya know.

@EunoiaAnrkyuk 2 ай бұрын

I once dropped my Makita impact on a 50mm thick pressed concrete slab and it broke the slab, as for the driver, there was just some scuffing/scratching on one of the corners of the battery.

@cpl_0503 3 ай бұрын

Great mixture of Serious Tool Testing and 8th Grade Boys - Hormone Infused adolescents playing with dad's tools in ways no one ever contemplated. I Love It. Hilarious!

@kurtlarson2061 3 ай бұрын

My favorite was just John riding along on the back of his truck at 30mph to throw a drill. Can't believe nobody commented on that!

@cpl_0503 3 ай бұрын

@@kurtlarson2061 Yep, 100% something my brother and I would have done at 16 and our parents would have been horrified to find out about.

@Ziplock9000 2 ай бұрын

Far too much of the latter for me. None of it is funny.

@albertj2459 3 ай бұрын

Love seeing your excitement as the impact continued to outperform your expectations!

@OmnieStar 3 ай бұрын

now you need to do a test where "Does pushing down make a difference in speed when the screw is already in the wood"

@I.no.ah.guy57 2 ай бұрын

To test torque? Just trying to clarify

@c.a.g.1977 3 ай бұрын

This must be the video with the most John Malecki giggles in it, ever 😆

@g.e.fourie5672 3 ай бұрын

Would love to see you compare these 10-in-1 / 15-in-1 type tools with the actual separate tools.

@RyTrapp0 3 ай бұрын

YES - we need more multi-tool reviews, and comparisons with standalone tools is a must

@angrymater13la 3 ай бұрын

My boss uses nothing but DeWalt, and almost 2 years ago he had a horrible house fire. Several of our DeWalt tools for melted pretty bad and wet from the fire hose but still run great.

@asrr62 Ай бұрын

That sucks what caused the fire. The batteries?

@kurtlarson2061 3 ай бұрын

Riding along at 30mph on the back of the truck to throw the impact! 😂😂😂. That footage was amazingly satisfying to watch

@Djkidkrazyx2x 3 ай бұрын

If squirrelly was a thing 7:04 lol, love your channel John. You also have a great crew 🤌🏼👌🏼👍🏼

@atsimas 3 ай бұрын

Torque channel has left threading bolts to a pressure device and they use that data to determine the torque.

@brakemaster8661 3 ай бұрын

I'm glad they didn't have a bigger torque wrench on those ranger wheel because the factory wheel torque spec is 100 ft lbs and they would have just kept going more hahahaha.

@I.no.ah.guy57 2 ай бұрын

Yep he's definitely gonna need to replace a couple of those studs and lug nuts after them getting stretched a few times 😅😢 I thought the same thing when he said he'll just max out the torque wrench 😂

@PuReWiReZ 3 ай бұрын

I don't think those lugnuts were actually torquing down with all that corrosion, you probably didn't have good surface contact.

@chrishatcher779 3 ай бұрын

Ford F ing Ranger!

@gregoryjasongranado5248 3 ай бұрын

14:41 I found a Ryobi that fell out of a truck in the middle of the street one time and it was perfectly fine.

@calumsy95 2 ай бұрын

I can’t fault Ryobi for being hardier than people expect. My wife dropped my impact driver into paint 2 years ago, and that thing still works perfectly.

@keithkozma 3 ай бұрын

How about making some shop shades with reader lenses so those of us that can't see for crap without glasses could buy some!

@grafyghtgaming8733 3 ай бұрын

This channel is just pure JM Squirrelliness and Stupidity and I am definitely here for it.

@Heather420 2 ай бұрын

Yes to the wooden truck bed build! That would probably look so cool

@gordonsmith9263 3 ай бұрын

Contagious enthusiasm John!😆

@3dp_edc 3 ай бұрын

you should test it with the javi battery vs the makita battery. Batteries can make a pretty big difference

@brianm6117 3 ай бұрын

My brother has a Bauer impact driver. He's used it multiple times to take lug nuts off before he got a regular impact. Also, most cars lug nuts are torqued to around 80 lb/ft. Larger trucks will be more of course.

@I.no.ah.guy57 2 ай бұрын

I would say 75 to 120 for most passenger vehicles and light trucks. With your bigger cars starting around 100. Then big vans and trucks around 100-150. Just wanted to add some more depth 😅

@jamietulloch3258 3 ай бұрын

Use me as the button to persuade Malecki to buy Sam a new car!!

@jaspereves6661 2 ай бұрын

Nah ford rangers are the best they are cheap but bullet proof

@AnanusBananus 2 ай бұрын

Use mee, use My butooon, use me, push Le butoon, My m8..

@ALIENBLADE 2 ай бұрын

Press me button hole@@AnanusBananus

@arnoldm889 2 ай бұрын

It has to be used car return pallet parts you can use to make a vehicle.

@NoSaysJo 16 күн бұрын

@@jaspereves6661lol next joke

@leonardmarinacci4303 3 ай бұрын

Yes. Build a wooden truck bed. That would be awesome.

@stevenfoster2992 3 ай бұрын

I haven't laughed that hard in quite awhile!! thanks John for the laughs!!

@chrisspaulding3243 3 ай бұрын

According to the 50 temu Super Bowl commercials, we’ve been saying temu wrong

@sccarguy8242 3 ай бұрын

Shop like a millionaire

@wendyhenschel. 3 ай бұрын

lOVE TORTURE TESTS ON ELECTRONICS. oops sorry i hit the caps lock button lol

@Strongfan77 3 ай бұрын

This more frequent posting is badass

@TheROZ 3 ай бұрын

As a professional listener, He did not say go

@Joe.shotit 3 ай бұрын

I thought I said it but you’re the professional. I trust you!

@tenatra 3 ай бұрын

Fancy flat epoxy wooden bed ranger. I'm here for it.

@dannyb4283 3 ай бұрын

One thing I'd suggest is giving the model number on them so we can pick it up lol. I like this idea for a separate channel and subscribed

@russelltherealestateguy7527 3 ай бұрын

Fun funny stuff. Like your builds also. Keep the content coming. I enjoy watching. Thanks.

@NeverlandSystemZor 3 ай бұрын

As Adam Savage said, when you buy a tool the first time... get the cheapest you can... if you use it enough or break it... buy a better one... and only buy a VERY good/expensive one for the ones you USE enough to justify it.

@capthowdy126 3 ай бұрын

i use a 18v impact hyper tough brand to do 120 ft lb on all our lugs. its been the best little impact driver we've used, it was dirt cheap cause someone stopped in one day with 2 hyper tough drills an the impact with 2 batterys an a quick charger for 25 bux so we did it to help them out thinking they would be junk but thats been 5+ years ago an they are all still working strong an used daily.

@ChristopherOBrienPSU 3 ай бұрын

Hyper tough are surprisingly good

@enderz0r 3 ай бұрын

Sounds like you bought some stolen tools. 🤦🏻‍♂️

@capthowdy126 3 ай бұрын

@@enderz0r nah we knew who he was, he gets in a hard spot from time to time an he usually brings stuff around asking if he can pawn it to us so he can come back later an get it back an we always do it to help him out cause he almost always comes back an gets the stuff or if he isnt able he lets us know to keep it an we only mkae him pay way we gave him but that day he didnt need much an didnt want to come back to get them so he offered to sell them all for 25 bux, probably got him something to drink but hes a good guy an dont bother anyone.

@capthowdy126 3 ай бұрын

@@ChristopherOBrienPSU so far the ones ive used have been, got alittle electric screw driver i use alot an its battery has died on it an its a internal battery but im going to try to swap it out or make it work with a 18650 cause it was a done good an it lasted for yrs b4 the battery finally gave out but it hink it was partly my fault cause i lost the charger an used one i found that was close but it needed weird voltage so i got close but not what it really needed.

@bretsubotnik1777 6 күн бұрын

Good shit, love this channel

@pricemcdonald8136 3 ай бұрын

You guys may have the best jobs ever.

@hanksadventures4132 3 ай бұрын

I'm all for that ranger. I have a 92 that I'm fixing as a gift for a buddy. His dad had the truck and passed away 3 years ago. Truck was parked and forgotten about until his mom passed 4 months ago.

@Da0R30 3 ай бұрын

Just so y’all know, it’s easier to set or break torque pushing vs pulling. Use your body weight to push the tool down vs trying to pull the tool towards you.

@2006klaus 3 ай бұрын

Fo Sure! Also much safer.

@crashconstructionunfiltere3829 18 күн бұрын

That impact driver did a lot better in the drop test than a 12v Milwaukee impact I had that felt off a 6’ ladder and hit a tile floor, then cracked in half

@josephgraham1065 3 ай бұрын

nice video. i would like to see some of the Temu layout stuff put up against the Woodpeckers to see how close they are

@fekeith935 3 ай бұрын

I bought one of those temu impact drivers and it was able to break lose the motor mounts on a 2013 chevy cruze

@steelvalleysportsmen7737 3 ай бұрын

Never seen John have so much fun...

@mitchellbollen3129 3 ай бұрын

Lets go man, you got me into woodworking!

@fixitdanner 3 ай бұрын

Good stuff, great testing!

@captkab00m66 3 ай бұрын

After this you should team up with donut at least to help out that Ranger lol

@SuperbCuts 3 ай бұрын

That would be such a cool collab

@wickdghost3639 3 ай бұрын

Most newer cars at 85 ft/lb and most older cars and light trucks are 100ft/lb and 3/4 ton and 1 ton are 120ft/lb. Big trip axle trucks are 300+

@erinspbrown 3 ай бұрын

Regarding the Javan 20 volt impact driver because I need a disposable (low-cost and can be broken or stolen and I won't feel bad) Would you please tell me exactly which model that was so that I may order one? It seems perfect for my needs Thank you very much Erin

@Jiiu27 2 ай бұрын

I Love Your Videos Man ❤

@n175209cvp 2 ай бұрын

In the beginning, you should have done flashback footage of the previous video doing the test when you unboxed the tools

@marjon1703 14 күн бұрын

I've got the same china driver but grey/black with 1/2 inch square drive and 1/4 inch hex in the centre for £37 (I splashed an extra £5 for the higher Ah battery pair). The thing is amazing, takes huge punishment and stunningly useful. I lent it to my landlord who bolted together a steel barn for his 3 JCBs with it. He was sad to give it back. For the price I am pleased with how good this device is. I use Festool and such for the exactness, design and perfection but for bashing stuff together and smashing it apart, this china tool does the job remarkably well. (I always wonder when it is going to explode into kibbles though...)

@duanebaker5796 3 күн бұрын

I'd love to see you compare what you use with Enjoywood and/or GoingMake tools.

@user-ug1fv6ys9j 3 ай бұрын

Yes truck bed build.

@6door6four96 2 ай бұрын

Those ranger wheel studs 😵‍💫

@Leroys_Stuff 3 ай бұрын

Now this is good stuff I needed this today thank you. You did the tests AvE doesn’t always lol

@gunners4129 3 ай бұрын

Always push the torwue wrench down when tightening a wheel. Never pull it toward your face. A coworker a couple decades ago lost his front teeth because he didnt take that advice.

@hydrolisk1792 3 ай бұрын

The little Javin that could!

@ardillasecreta 12 күн бұрын

YESSSSSSSSSSSSSSSSSS build him a wooden truck bed!! Love that idea

@RameeHamad 3 ай бұрын

I want to see if the Javin performs better with the mikita battery.

@RobNorton 3 ай бұрын

That ali g clip 🤣 i need to watch it again now

@torridice 3 ай бұрын

Do the shop shades come in prescription?

@emerybryant 2 ай бұрын

truck giveaway 🤣 itd be fine in my state 😅😂

@christianroach5779 3 ай бұрын

you should use the mini scuba tank from the 4 wheeler vid and give to evan next snowmoblie trip😭

@craigbooth5414 3 ай бұрын

watch out project farm, there's a new scientific test team on the scene

@JohnMaleckiUnscrewed 3 ай бұрын

what is this word you use.... "scientific"....

@nonplayablecharacter4815 10 күн бұрын

I question the lug nut test cuz car lug nuts should be torqued to 80ft/lb and Sam said a typical lug nut should be torqued to 120ft/lbs which would most likely snap the bolt.

@jojoyojimbi 3 ай бұрын

bro if you're ragging on your employees car not being up to snuff, it's only a reflection on you, because you don't pay them enough

@poppamad979 3 ай бұрын

Hey John, if you bought them from Lowes, you could take it back after you through it off of the ladder onto the parking lot or out of the back of the truck. Looks like the stuff I got in my pallet purchase.

@jwilson1484 3 ай бұрын

This guy has to be the coolest dude to work for.

@steve_main 3 ай бұрын

The argument was "he did not say go" NOT "I didn't hear him say go" stop moving the goal post John :) Respect the game! - Kevin Malone!

@randr10 3 ай бұрын

The old DeWalt NiMH 18V impact drivers were about on par with the Temu mini one, or maybe even a little weaker. If I remember correctly when I tested them it would stop around 35-40 ft-lbs. I also had a 1/2 inch impact and it could barely pull off a 100-ft-lb lug nut. I had to add torque to the nuts after putting them on with that because it was too weak. People forget how bad the old tools were. Now the cheapo import stuff outperforms that old prosumer stuff from 20 years ago.

@mromutt 3 ай бұрын

That truck for sure needs a wood bed and rails!

@countrycraftscustomwoodworking 3 ай бұрын

I think he got that truck off Temu too lmao 🤣

@Dan_711 3 ай бұрын

Cross threaded those studs 😂

@mycaI_ 2 күн бұрын

I know the odds of a chrome socket exploding on an impact are low, but they're not 0 lol

@austinhadfield6330 3 ай бұрын

the joy in playing with tools :3 I've been trying to find a ranger for the wife, think it'll make it to Nevada?

@matt_776 3 ай бұрын

Bro that truck would change my life lol

@GSMoffer 3 ай бұрын

Bosch professional torture test next please!

@PureRockFury88 3 ай бұрын

I'll be over to grab the ranger a day you choose lol

@dalyncrawford1614 3 ай бұрын

U should do these test more often

@icebear6393 3 ай бұрын

I have the Ryobi p239 with the quarter inch to 3/8 in drive adapter it's removed lug nuts at 120 ft lb before I'm not going to say it was happy but it did do it

@I.no.ah.guy57 2 ай бұрын

Lmao how long did that take to break it loose?

@icebear6393 2 ай бұрын

@@I.no.ah.guy57 I've never thought to time it if I rotate my parents tires I'll time how long it takes to break them loose and leave the comment

@I.no.ah.guy57 2 ай бұрын

@@icebear6393 lol it's not a big deal, I was just looking for a rough estimate, not exact. I'm just saying that it probably took a second with a 1/4in drive

@icebear6393 2 ай бұрын

@@I.no.ah.guy57 it took between 6 and 8 seconds. I was bored and had nothing better to do probably still not good for it I'm just impressed it does it at all.

@I.no.ah.guy57 2 ай бұрын

@@icebear6393 hahaha yeah that's a little longer than you want, but 100 ft lbs would probably be a good limit to stay under for that gun with that size shank (1/4in). Is this a full size truck or SUV you're taking the lugs off of? 120 is a little much for a passenger vehicle or light truck, so I'm jw

@Dardrum 3 ай бұрын

My two year old heat pump motor just gave up the ghost, ya gotta love Chinese stuff. Anyway, what happens if you use detergent oil on something like that motor?

@alexbair2542 3 ай бұрын

do shop shades do prescription safety glasses?

@eligaffke6296 3 ай бұрын

Since the Makita batteries work in it i wonder if it would perform better with a new Makita battery?

@draginslayer87 3 ай бұрын

Gimme that ranger 😂

@necrosbowen 3 ай бұрын

you should do those tests again, with the javn but use the javn battery and use a genuine makita battery in the tool, you would be surprised how much of a difference it will make to torq, longevity and everything else if they are using just cheap cells in those batteries that come with it

@Resyektt 3 ай бұрын

I’d love to see this.

@sw01ller 3 ай бұрын

Did you guys just clip in Ali G??? Haha. Didn’t think you’d know who he was. Fair play.

@cmdrglass5096 6 күн бұрын

You should have tried the Makita battery in the Temu it could be all the difference for performance lol

@JaredSVX Ай бұрын

My Porter Cable 18v wont take off lug nuts...damn I need to upgrade to Javin tools 😂

@-canopus-513 3 ай бұрын

Honestly for the price, I cant find any faults with these tools. They usually come with a battery and charger too, so for anyone who's not able to drop the dosh for quality tools, or isn't sure if they'll be using them enough to be worth the cost. These are a great alternative.

@rulowth4815 3 ай бұрын

Except quality standards and toxic material xd good luck with that

@ddjohnson9717 5 күн бұрын

@@rulowth4815 quality looks good and guess where the dewalt coming from🤣 same factory

@ONEpocketKID21 3 ай бұрын

Ayeee free truck!

@MarkKelly1307 3 ай бұрын

Rust free wooden truck bed PLEASE!!! That’d be sweet. Maybe some sorta epoxy tool box / misc parts carrier?!? C’mon youse guys!! Love the videos

@steved8714 Ай бұрын

You should never over torque a lug nut… you will stretch the stud and weaken it, it’s called bolt elongation and you’ll take it into the “plastic range”