Twin Turbine Rotary Grinder Tool Powered by Vacuum Cleaner

No video

Twin Turbine Rotary Grinder Tool Powered by Vacuum Cleaner

Рет қаралды 3,593,820

5 жыл бұрын

►Subscribe! bit.ly/2m1d1y7
►T-shirts & Hoodies! bit.ly/2kABytm
This is actually a revision of this goo.gl/mHP2Ff but the major difference now is that it's precisely machined, It's more durable, reliable and more efficient. Nothing can beat hobbyist's rotary tools, but it's a prototype that I wanted to try out now that I own the PocketNC (5 axis desktop milling machine).
- PocketNC goo.gl/NdTxBS
- Harvey endmills www.harveytool....
Instagram: johnnyq_90
Support my videos!: / johnnyq90
Subscribe to my channel! / johnnyq90
Follow me on Google+ plus.google.co...
Follow me on Twitter! / johnnyq90

Пікірлер: 975

@mcioga 5 жыл бұрын

that rotor balancing tecnique made my day !! thank you for sharing :)

@rcrazee5077 5 жыл бұрын

Also find it very interesting..Craftsmanship level 99 :)

@Kavster92 5 жыл бұрын

Honestly how ingenious is that? Using the magnets to create a frictionless rig for the shaft? Amazing to even think of it really!

@mstrVLT 5 жыл бұрын

same like Igor Negoda kzfaq.info/get/bejne/nMeilJR0nbiuioE.html )

@salmanal-harethey1486 5 жыл бұрын

I was like do I see what I am seeing

@ItaloLoureiro 5 жыл бұрын

@@Kavster92 Man, I just realized now that those were magnets. I thought he had made some sorcery I could not see... But a magnet holder to balance is fantastic!

@locouk 5 жыл бұрын

JohnnyQ90’’s Wife: Johnny Q has been vacuuming his workshop all day, it must be spotless by now?! JohnnyQ90: 😂😎

@Simion_T 5 жыл бұрын

Wife: "Johnny, the living room awaits!"

@Saucer500 3 жыл бұрын

@@Simion_T you want me to make random holes in the living room honey ?

@_P0tat07_ 5 жыл бұрын

Sick. Much better than the dremel version.

@SuicideNeil 5 жыл бұрын

I was thinking the exact same thing- I was expecting this one to be just as weak but then it completely blows away the Dremel version in the testing, so much more torque.

@Not-C-418 5 жыл бұрын

hope for the pocket NC lol

@thegenerousdegenerate9395 5 жыл бұрын

Pretty sure this IS the dremel. Did you see the hose while the tool was working? He made 2 one with air and the other attached to his dremel. I call shennanigins.

@daftbence 5 жыл бұрын

@@thegenerousdegenerate9395 Nah, you're just seeing things.

@octane613 5 жыл бұрын

@@thegenerousdegenerate9395 I normally trust Johnny to make real things but I have to agree with this. It didn't sound or act like the vacuum powered one when he was actually using it, and it didn't bog down hardly at all when it was put to metal or wood. And it may just be my eyes, but the end shot, I feel like I can see it "cog" a little bit when he turns it off, like a rotor in a motor. I really want jq90 to clear this up, because I too call shenanigans.

@andinbriwel1092 5 жыл бұрын

I particularly love how your videos successfully illustrate just how much work goes into a project like this. So many of these type of videos leave people with the impression that projects like this can be quick and simple if you just have the right tools, but your videos successfully communicate the necessary skill and significant amount of time required for such an intricate design, while still not becoming excessively long! Great work!!

@OminousPinapple 5 жыл бұрын

I'd love to see a disassembly and inspection of this after a month of use!

@Warloghe 5 жыл бұрын

Love the channel Johnny, I wish I could do half of what you can.

@Gamerock82 4 жыл бұрын

True that.

@ffss2989 4 жыл бұрын

Hi I am from Iran And I really enjoyed the design and the steps of making and assembling and the operation of the device, it works exactly like the dental device, well done to you craftsman.

@dreaman1981 5 жыл бұрын

Te lo voglio dire in Italiano volutamente: TU SEI UN GRANDE, UN TALENTO INCREDIBILE!!!! Una persona come te dovrebbe ricoprire cariche istituzionali pubbliche!!!!

@Hobby_Electric 5 жыл бұрын

I WANT THIS MACHINE !

@NitroRC 5 жыл бұрын

Du auch hier ^^

@Hobby_Electric 5 жыл бұрын

@@NitroRC Klaro :-)

@rileytrain9254 5 жыл бұрын

It's almost more useful that it vacuums the debris while working

@andrewyoung4473 5 жыл бұрын

yeah maybe a filter to stop the large debris and a funnel to get in close to the powder

@mate7255 5 жыл бұрын

Yeah but damages the propeler of the turbine

@loud_n_lowtaco200 5 жыл бұрын

Battle Ground Survivor not if soft nonmetallic materials are used

@mate7255 5 жыл бұрын

Cobster Wilson yes I know, soft materials wont do damage

@brunovlaminck9901 5 жыл бұрын

Chineses know what the next gadget they will sell

@peterduxbury927 2 жыл бұрын

Seeing the Pocket NC for the first time, blew me away!!

@cliveso 5 жыл бұрын

That's mental... You milled the guide vanes and *then* press-fitted that into another piece of metal, and then machined that down to a thin housing, all in situ. Crazy stuff!

@eformance 5 жыл бұрын

Are you planning to attend Dental School as your new hobby?

@poptartmcjelly7054 5 жыл бұрын

image going to the dentist and he pulls out one of these

@wickedprotos1937 5 жыл бұрын

lol aaaahhhh that sound... of the dentist :-)

@professoreggplant9985 5 жыл бұрын

Interestingly, I've seen air powered drills such as this in the dentist office.

@doorguner01 5 жыл бұрын

AVE gave up on it Not this guy!

@salmanal-harethey1486 5 жыл бұрын

9:13 I was like whaaat. I never knew something like that exist. I am latterly smiling.

@dinodeangelis7978 4 жыл бұрын

Oh man. That pocket NC is officially the coolest tool I've ever seen. The shit I'd make with that would be world altering

@user-ci1lm5wj8z 5 жыл бұрын

Wow long time no see. I love your making. Please more upload the video! Have a nice day. Good bye

@ronniepirtlejr2606 4 жыл бұрын

Place the vacuum hose on the exhaust port. Flip the motor over so when you use it, the debris will be blown out of the way instead of sucked in!

@Acheiropoietos 5 жыл бұрын

99% perfect. Who could ask for more? A pleasure watching your machining skills.

@nateb4543 4 жыл бұрын

I am so jealous of your tools, ability to design and execute this. Wow

@MrCarnutbill67 5 жыл бұрын

Alright alright, back to the turbocharged engine. Haha

@davey6024 5 жыл бұрын

Level 100 engineer. Respect.

@nunyabizness199 4 жыл бұрын

I remember Kirby vaccuum company making tons of attachments for their vaccuums, like even paint sprayers. But I don't remember them having a die grinder..😁 Very nice !

@brokenheart9997 4 жыл бұрын

تعليقي هنا .هو هذا المحرك الرائع صحي للغاية..لان تيار المحركات يؤثر على الدماغ. احسنت صنع يا صاحب الدرع الذهبي.🥇🏆⛳

@WinstonMakes 5 жыл бұрын

Dude! Those are some amazing looking parts!

@johnnyq90 5 жыл бұрын

Thanks man! I'm really glad you liked it 😁

@2011metalmaniac 5 жыл бұрын

what happened to the supercharged wankel engine?

@steelandglass 4 жыл бұрын

Ahhh, Johnny, watching you work is like listening to fine classical music. So rewarding and pleasant. Your integrity and attention to detail puts a smile on my face. Thanks for taking the extra time to make a vid for all to share in your satisfaction. I hope you live a long and prosperous life and create many unique and perfect objects. Please continue to post when you can. Such an inspiration to start my day. Thank You.....

@LutherFPV 5 жыл бұрын

the amount of effort put into this video is just INSANE! The people who dislike this video doesn't understand that! It makes me irritated :/

@blackturbine 5 жыл бұрын

The power of succ

@theimperfectgod7140 5 жыл бұрын

_Memes_ 😂👌

@lpjunction 5 жыл бұрын

vacuum cleaner normally runs 1.5kw to 2kw that will put this tool amount the power tools.

@blackturbine 5 жыл бұрын

@@lpjunction and air turbines are around 10% efficient so you can expect around 22w of mecanical power output, still not so bad

@lpjunction 5 жыл бұрын

I am aware of thr efficiency I meant the machine is taking 2kw level of power that puts it amount power tools That`s based on the power consummed

@RobertHellxKnightBrennan 5 жыл бұрын

I love watching this stuff. It's like meditation.

@kanalbiru 3 жыл бұрын

You really built from scrath, the idea from ur mind, with highly detail and precision. Wow,

@ronniel5844 5 жыл бұрын

Awesome idea you are very sharp between the ears

@G40bv 5 жыл бұрын

Next project... a filter cap so it won't damage the blades. Awesome job

@gabrielscalese9248 5 жыл бұрын

Your inventions are awesome!!!! What happened with the rotary engine with supercharger

@teeshark6584 4 жыл бұрын

Wait did he just build this from scratch? Wth this guy is amazing. Most of us couldnt build that thing with a complete set of directions, let alone off the top of our head. Wow

@backermalaker 5 жыл бұрын

14:38 Thanks for demonstrating the vacuum

@raushankarimov4320 5 жыл бұрын

CNC Igor Negoda

@friggyfrig123 5 жыл бұрын

Да уж, коллаб с Негодой вышел бы знатный!

@MisterVoodoo 5 жыл бұрын

Игорь дремелем лопатки вытачивал вручную))) точно CNC

@Excvositorum 5 жыл бұрын

Без кофэ не то....

@Excvositorum 5 жыл бұрын

Призовите Игоря в тему ;)

@giggawc8457 5 жыл бұрын

I don't think this pocket cnc is sturdy enough for inconel

@The_Bandit_750 5 жыл бұрын

That's insane

@skidlidzdg 5 жыл бұрын

3 flute less chatter, 0 flute better for roughing.....And very nice turbine build. So relaxing to watch.

@dhirendrapsingh6758 3 жыл бұрын

Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.

@JG-iw8mh 5 жыл бұрын

I would not be mad at all if you pumped out more videos.

@johnnyq90 5 жыл бұрын

I wish I could upload videos at least once a week, but unfortunately many of my projects take too much time...

@JG-iw8mh 5 жыл бұрын

@@johnnyq90 I know the problem all too well.

@AA-ym9pz 5 жыл бұрын

"I have a СТС and Lathe for more than 5k EUR. But I have no more money for a mini drill!" 40 eur, Carl!

@firudjlapasion 3 жыл бұрын

You have the perfect Machines for make a homemade jet motor

@grazen321 5 жыл бұрын

I hope someone here understands how complex, intricate and intelligent the design and creation of this is. Because I have no idea

@TheSoldatov 5 жыл бұрын

Привет,любители,турбо микро пылесосной тяги))

@neo_ex 5 жыл бұрын

турбина долго не проживет, весь мусор через нее летит, за то чисто вокруг ))

@user-yf6wq2pj4u 5 жыл бұрын

А нкгода то рулит

@user-dp1yd3ze8h 5 жыл бұрын

😂

@alexwood7417 5 жыл бұрын

What happened to the turbo rotory engine?

@djsid01 5 жыл бұрын

yeah im also waiting for the next video i want to see how much power that rc engine got

@Bandicoot803 5 жыл бұрын

You're the only one so far who has reversed the air tool league so far by going negative air pressure!

@aerialcat1 5 жыл бұрын

Outstanding demonstration of the capabilities of these small CNC machines... good job too.

@reobass007 5 жыл бұрын

Очень интересный инструмент получился ! Браво мастеру ! Есть одно но для практического применения не выгодно так как пылесос потребляет много эл.энергии проще пользоваться обычным дремелем а так посмотреть было очень интересно.

@user-mj4rm5jl8y 5 жыл бұрын

А то что инструмент совмещён с пылесосом имеет свои плюсы, вся (почти вся) образующаяся стружка улетает именно в пылесос...

@Razorbill_ 5 жыл бұрын

Они богатые и они могут платить за электричество. Это в раше невыгодно

@Zima71084 5 жыл бұрын

и вся образующаяся стружка влетая в лопасти рано или поздно(скорее рано) размолотит их или послужит образивом. при отломе лопасти возникнет дисбаланс и на таких скоростях ( судя по звуку 25-40 тысяч) будет жуткая трясучка . да и со шлангом от пылесоса в руке особо не поработаешь с мелочугой

@drons6768 5 жыл бұрын

Думаю если подключить компрессор эффект будет таким же. А где нибудь в поле, имея только баллон с сжатым воздухом инструмент незаменим

@maZZor100 5 жыл бұрын

@@Zima71084 тут то смысл по большей части в идее и выполнении:)

@MrApple-yw9vp 5 жыл бұрын

The project is really cool, but will the bearings survive the insane RPM's ?

@thatguythatdoesstuff7448 5 жыл бұрын

Even ABEC1 bearings are rated to 30k+ rpms when the bearings are this small. I think the loads and temperature are a bigger concern if he's doing sustained work with the tool. Temperature might be mitigated by airflow through the tool.

@lyteyearz5810 2 жыл бұрын

What an inspiration you are. So much attention to detail. I would pay a high premium for hand made tools by you. 👏🏽👏🏽👏🏽

@tanzanos 2 жыл бұрын

Excellent work. You can redirect inlet to face backwards to avoid FOD

@AndoniOlea 5 жыл бұрын

Next step, a real combustion turbine like the ones used un aeromodelism.

@MATEKYOO 5 жыл бұрын

and installed on his rc car... (for replace the original nitro motor)

@AndoniOlea 5 жыл бұрын

@@MATEKYOO i like that idea, but for that it would be bettet to use it like in a helicopter, they use the turbine to make rotate the rotor instead of for thrust. If you use a turbine for propulsion on a RC car, even just having it started without accelerating, it would make it move forward and that is a problem.

@kadmow 5 жыл бұрын

@@AndoniOlea : hypothetically it should have a free power turbine geared to the transmission... (direct gearing the gas generator to a shaft converter is a bad idea, though it is a cheaper / lighter alternative) Axial RC turbines, who wouldn't want them... ( though they do suck and blow thermodynamically at that size, allegedly)

@AndoniOlea 5 жыл бұрын

@@kadmow You are correct in that, but if he uses a turbine in a conventional way, he should add brakes to the car (it doesn´t matter how they work) but it needs them.

@AndoniOlea 5 жыл бұрын

@@kadmow This in size is not too big, but neither is it small. Generates 8.6Kg of thrust at full throttle. kzfaq.info/get/bejne/gbakpq-Bsrq6no0.html

@rafee9442 5 жыл бұрын

High RPM but low torque right?

@Mike-ff7ib 4 жыл бұрын

Now you can drill your own cavity. Awesome workmanship skills!!

@guichog9509 5 жыл бұрын

You're a genius, congratulations my friend.

@MementoNeli 5 жыл бұрын

Now mount that to the cnc, see how it preforms, it might be actually pretty good to mill :p

@TheScarvig 5 жыл бұрын

my first thought: could this work as a self cooling/ self cleaning spindle for diy cnc machines?

@MementoNeli 5 жыл бұрын

@@TheScarvig Ye it sure would work. Speed seems high enough. But the particles that get sucked in might damage / unbalance the turbines thus causing vibrations. But a blowing vacuum would solve this problem and actually would remove the need for a chip cleaning blower thingy... :p

@coreyfro 5 жыл бұрын

You shouldn't use such long reach tooling for every operation. Your feeds and speed could be higher and your finish will be better if you stick with appropriately sized tooling. The machine will also be quieter, which is evidence of better tooling selection.

@danielskoog5565 5 жыл бұрын

Wow you could make that into a product! I bet a lot of people would buy it! Really awesome build!

@ziyaadhoosaindelavega3081 4 жыл бұрын

Your skill is God sent

@olgaolga2489 5 жыл бұрын

Игорю Негоде не показывайте, а то у него глаз задергается

@hate-conductor 5 жыл бұрын

А я ток хотел линк ему в камменты скинуть...

@user-zz8zw7vf5z 4 жыл бұрын

точно)

@chezzz65 5 жыл бұрын

Его нужно срочно, вместе с оборудованием к Негоде отправить...тогда точно к марсу стартовать начнут

@Kolyanznaet 5 жыл бұрын

Лучше Игоря к нему, пожалейте иностранца 😂

@romashamil6787 5 жыл бұрын

Согласен он без стопка сдаётся

@romashamil6787 5 жыл бұрын

Негоде не показывает ато плохо ему будет

@ancherny 5 жыл бұрын

Игорю-то чего? Это ему плохо будет, когда увидит, как Игорь лопатки руками из инканеля точит! ))

@elyankhayat2900 3 жыл бұрын

You are so creative I was glad to see your work

@JuanRodriguez-cf6cg 3 жыл бұрын

It is simply amazing!! I am extremely impressed about your skills using such sophisticated equiment!! All that machinery that most cost thousands of dollars, controlled by those expert hands of yours, of course a grinder powered by a vacuum should not be a surprise!! I was thinking " man, o dremel costs $60 bucks!! I bought one for $10 a while ago...and then you grabbed a dremel!!! What the hell???? The point is................

@user-xu5ig7wc2r 5 жыл бұрын

Когда пересмотрел Игоря Негоду :)

@MirexII 5 жыл бұрын

Игорю бы такой ЧПУ, он бы уже наверное по луне ездил, огород городил. :))

@neo_ex 5 жыл бұрын

у него же вроде есть чпу какой то, он просто не научился им пользоваться или просто по кайфу сделать это на токарном и фрезерном с ручной подгонкой.

@MirexII 5 жыл бұрын

@@neo_ex насколько я помню, это был 3д принтер, а это слегка разный функционал.

@blacklion79 5 жыл бұрын

@@neo_ex У него плоский был, 2.5D, и здоровый, врядли там точность такая высокая.

@user-yf6wq2pj4u 5 жыл бұрын

Ну парень сделал,но мы то знаем

@hyperhektor7733 5 жыл бұрын

15:15 imagine a denist using that on your teeths xD

@chamarystigers8731 3 жыл бұрын

🦷🦷🦷🦷🦷🦷🦷

@danielvantland 5 жыл бұрын

Yes! the waiting was worth it. I really have been enjoying your videos for a long time now, and i need to say, that your a great thinker and maker, and you really should keep it up.

@mrMacGoover 5 жыл бұрын

It blows my mind the capacity and level of your thinking and knowledge!

@greemstrider 5 жыл бұрын

Aaah.... enginner porn. Absolutely stunning work!

@richiieriich 5 жыл бұрын

I need some thing made please let me know the if your willing to make and ship to me. Send your email if willing It is a turbine shaft that had a shaft rotating over a shaft. In other words two shaft one main shaft and a second shaft over that main shaft

@lennicrafter8902 5 жыл бұрын

Just use two tubes

@1992djg 5 жыл бұрын

Look up AvE he’s doing just that making parts for people on his 5 axis Cnc townpump cnc

@24kTechProduction 3 жыл бұрын

damn... it was so hard to skip for once. the whole video was mesmerizing and cleanliness was up to the mark. well done.

@user-pq2nd6tm5k 5 жыл бұрын

👍👍👍 ну что тут сказать. Магия науки и станкостроения... плюс Мастерские Руки. Просто слюна Когда смотриш такое Кино. 💯 🥇

@iamnickyj 5 жыл бұрын

Nothing better than watching a beautiful machine make a beautiful part. Love the channel, keep up the amazing content.

@travis4798 5 жыл бұрын

Only thing I would have added is a cowel to the front of it to divert the intake. Don't want to be sucking up shavings through the turbine and chewing it up. Looks to be very effective!

@InssiAjaton 5 жыл бұрын

Speaks of the machining accuracy that the static balancing was all that was needed. I was actually waiting to learn how you would do a dynamic balancing. Oh well, maybe some other time...

@sypernova6969 5 жыл бұрын

I was thinking all along why would one prefer this to a regular rotary too, besides maybe a little less weight. then I saw how there was NO DUST anywhere after the grinding. that's pretty cool.. works much better than the old one. congrats seb,

@greggoliver8262 4 жыл бұрын

I can't watch anything for long before i become board but this,this i can watch for hours.

@LordRaa 5 жыл бұрын

If I might make a suggestion, maybe look into making a press for bearings and broaching? That would make for an entertaining video series.

@ebealienthy 5 жыл бұрын

Hello, I express my point of view. You have worked well and I liked it, The beauty is to plan and succeed in realizing and solving.

@Kj16V 3 жыл бұрын

I'm amazed at how powerful that is. It's much better than a Dremel.

@ChewyGDRP 5 жыл бұрын

Nice to see you had a crack and balancing the rotor! Looks like it was close enough.

@jojorodriguez3304 Жыл бұрын

Dude this is so badass!!! Wow I am amazed by your craftsmanship amazing idea so so cool how you came up with this concept

@mohammadr797 4 жыл бұрын

WOW! In 20 min's you made a micro turbine! Imagine what can you build in 200 min's!! :) Ultra satisfying video!

@Brobolio 5 жыл бұрын

This is an awesome video, but the moment I saw the tap holder I was pleasently surprised!! Nice work my friend!!!

@StrayWolf84 3 жыл бұрын

Ok, now that'a just outstanding engineering!!

@Georges-MILLION 5 жыл бұрын

Magnifique réalisation ! Un très grand bravo ! Beautiful achievement ! A very big bravo !

@tylerdavis9820 5 жыл бұрын

Really cool idea balancing between 2 magnets.

@LBCAndrew 3 жыл бұрын

You might want to make some sort of guard when using a thread milling cutter because you're going to have it catch one day and when it comes apart on you, its gonna be ugly. I had a similar bit shatter while using it in Bosch palm router with the base removed so it was basically how you were using this. Part skipped off my full face shield, another part went through two layers of sheet rock behind me and into the house, and another piece skipped out the open garage door never to be seen again.

@Hammerjockeyrepair 5 жыл бұрын

Its already more reliable than a dremel!!! He made 5 cuts with it and it still works!

@franciscoblascogregorio5206 5 жыл бұрын

Felicidades!! Tienes un gran nivel de maestría. He disfrutado mucho viendo tú trabajo. Saludos desde España.

@moinshaikh2265 5 жыл бұрын

Very fine and detail work. Excellent.

@ufoofficial4520 5 жыл бұрын

nice job man ,i made a turbine cleaner that cleans the inaccessible places with a rotating brushes

@barkster 4 жыл бұрын

I want all your tools!!! I learned a lot of new techniques from your videos. Thanks for sharing

@jiggilowjow 3 жыл бұрын

look at everything getting sucked right into the turbine. last time i checked the object was to keep debris from entering the turbine. but im no rocket scientist. maybe this guy knows something i dont. cheers mate cool build. can i buy one, please

@mpcautoworktv1601 5 жыл бұрын

I think this is better than the plastic one, since it is more precise and it has twin turbine, which compensates the torque loss. Since it is made from aluminium so it has more torque.

@steves8113 5 жыл бұрын

That’s extremely clever and skilled.

@anonymousanonymous9991 5 жыл бұрын

There's some electrical engineering guys that'd be mad you didn't just use the motor in the vacuum to drive the shaft... Then there's the machining guys that love the idea of a rotary that has no recharge time and what I'm guessing is actually quite a lot of torque.