I love how you don't even acknowledge the new popcorn machine. Lol. As far as the power supply goes, I consider all of these videos that end this way a learning experience. That's one of the things I enjoy about this channel. We get to see the times where things don't go exactly as planned and we learn from it.

Thank you for posting another video again so soon. I hope you enjoy it like you used to and have time to make the videos. I've been going to my John's Arcade support group for the last few months and it has helped with the absence of you videos, most notably the year end review and John's Kitchen videos.

Nice to watch a new video! Went to the Manchester play expo this weekend. Was a pretty good experience and got to play many old classics. It's a shame it was mamed by tons of the games either having no sound, unresponsive buttons/joysticks or just not working at all. They had a deluxe outrun with a wheel with no resistance so you crashed really easily, a deluxe space harrier that wouldnt go to the top of the screen. They need your restoration skills! What was good is that I got to play many games I havent been able to play on mame due to dedicated controls such as tempest and robotron. Pretty cool. It did make me appreciate my pandoras box though. Some of the games i tried did look and play better on my box than on the original cabinets. My purist attitude has been knocked a bit. It did take me right back to the 80s and was REALLY busy on the arcade cabs.

Power supply repair and even bonus John's Kitchen interludes, sweet.

Yes you used my magnetic bowl! Thanks buddy. So glad you are back. This made my day!. Good to see you smoking also. I have a Grilla Grills Silverback. If that Traeger ever takes a dump you can't beat Grillas customer service and the things built fantastic. I have smoked in -5 degree weather and it keeps its temp perfectly and the cost is very good.

Good lord I cut my teeth on most of the games you have. Been an arcade tech/service tech/manager for over 25years. (Still doing it!) In the past where it was just the +5 +12 -5 we used to just remove the old linear supplies and mod them over to a newer style switching supply. Nice to see someone dive into the original supply!

I forgot about John's kitchen videos. Nice to see it back

Dude welcome back! I was starting to worry we had seen the MK get rid of ya, I swear I have not seen any videos here since the Final video on that cab. Just glad to see you pop up my friend.

Work had set up one of those Pac-Man 1Up's in the break room. They are indeed amazing to play when seated. I wouldn't have thought it until I tried it. And I am glad to see the company isn't backing down from that lack luster Christmas season. Looks like they got some new ideas on the horizon. Like counter top versions and wall mounts. What I am hoping for...a cocktail table model. They do have a prototype of one. And welcome back, John. :)

Your videos are great. When I saw the grill it reminded me of baking my Xbox 369 board in the oven to reflow the solder to get rid of the rrod.

May 2020 - Atari Paperboy Arcade AR-III AR3 Power Supply - Part 23

New popcorn machine is looking good!

These kind of episodes are my favorites.

Desoldering tip: leave the tip on the joint for a couple of seconds and wriggle the tip in a circle before hitting the trigger.

Boy I sure miss these weekly videos....they are my inspiration....

I appreciate this long-form approach. I must admit, though, I kept chuckling every time this guy almost destroyed his lab station.....like watching a gorilla that learned to solder! You've got my thumbs up!

Feel nostalgic and claustrophobic all in one spot!

Might of been useful to use time lapse for some drawn out parts. Nice to see you back!

Awesome vid John mate, I'm starving now though after seeing that meat!

Holy crap we're those eyeglasses on your bench? Welcome to the club!

John. the Hakko should sit on the join for a second to let the solder melt properly before engaging the vacuum. it should be enough to run it once. not only is the barely melted solder more likely to solidify in the tube and cause blockages, it's also wearing out faster than it needs to

Aah, a new basement desk setup and guitar pedal review video.

Great way to start food brings us all together , so While I was watching couldnt stop thinking about the bbq , love your videos brother , dont you just love how the old stuff is easier to replace , I should do more of this on my channel I know my Silent scope has a vertical collapse problem some tie when I turn it on , good old slap on the side fix's it for now , cheers John hope my channel picks up " Marcho arcade "

I can tell, you're getting burnt out from this hobby. Most things don't last, I get it man.

1:40 That popcorn machine is your best restoration so far.

Wow, I think you got more excited about that delicious-looking superbly roasted pork than you have about almost any repair you've done, John, judging by how much more of that Herald Angels Christmas music with the stars, outside of the Christmas season, that you put over this meat, than over a repaired game, haha!

One quick sujestion John. Test the continuity between the ground and the 5volt pins on the board and see if you have resistance .

Love your videos. I started making my own videos and doing some DIY projects.

Nice john..i just know you will make that PSU great again!!!

John's new channel: John's Assorted Meat Products Taste Tests and Reviews

Funny to see you testing your desolations without the vacuum chamber. 😂

John, really liked your channel. Hope you come back to make more videos

By the way. Next time I'm up I will bring the special drill bit to unclog your Hakko FR-300. It's a manual tool that you twist and it cuts through the clogged solder inside. Also, no need to shake the bit when trying to take it off. There are tabs on the side of the grab tool. Squeeze them and it grips it so it slides off. Magic!

Just a general comment I really enjoy your videos very informative. Just wondering why you dont have a Spy Hunter though, think u need to add that to your collection. Would like to see some repair videos of it.

Could be a fault on the logic board which is dragging the power supply down. Power supply could be fine. Doesn't look like there is a fuse in the 5V rail, if there was, it would probably blow.

Nice u makin videos again man!

Love your ch man!!!

Some amazing bird sounds I never heard before 12:33

John We love you with ,or without glass

It might be worth looking into getting a cheap thermal imaging camera. There are versions (you can find them on eBay and elsewhere) that plug into your phone (android and iPhone). You can then use them to track down hot spots (and likely shorts) on PCBs. I've used a Seek Thermal for android, which worked well, and those can cost about $200. I think Ian used one in one of your videos to troubleshoot an issue. There are cheaper, generic Chinese versions (look for HT-102) for around $100 as well as ones that don't need a phone (search HT-175) that cost around $150. There's also a much cheaper method of spraying isopropyl/rubbing alcohol on an area of the PCB. It should evaporate instantly wherever there's a hot spot. I've never tried it myself, but I've seen that approach used often in troubleshooting Macbook and iPhone motherboards.

with the AR3 voltages correct wasn't really expecting the rebuild to help. having isolated a problem to range of cheap parts shotgunning might be fine but shotgunning the wrong board might just create new issues where none existed. easiest way of debugging voltage drop is probably your finger, shorted component is likely to get hot.

I kind of like what John did here with this taking a break and enjoying some other stuff for a minute. That's what my cousin. If you stick on one thing all the time everyday you're going to burn out. Then I don't think any of us want to burn out on this Hobby I love it too much to get burn out on it.

What if you took a switcher and put 5v and ground to that game board header and see if you still have low voltage reading at your game board test point. That would confirm or remove the A/R-III from the equation, no?

Nice slow motion meat shot and christmas music lol!

Sorry it didn't work out shotgunning it. When I rebuilt the linear power supply in my Space Invaders I literally had to replace every part in it. You'll fix it. I have faith.

Hi John. I think You may have a short on the pcb. If You're getting the 5volts then you have a good power supply . If you have another power supply that you know works then try it out.

Hi John, I saw you had glasses, I guess you finally gave in and brought them, how are you finding them ? I now have them for close work and also some bi focal for everyday use, but I just cant get on with the bi focal.

Welcome to the glass eyes club :-)

Your videos are fantastic. Haven't seen a new one in awhile. Everything ok?

Ooh just got me a Kamado Joe. How are you prepping those potatoes? That looks good...

There was an epidemic of counterfeit 2N3055s in circulation at this time, where did you get them?

it's funny to keep hearing new interpretations for OL. "over limit", "open line", "overload", "open loop". any other ones?

We're back!!

"I can't keep working on this..." for how long?

Yay new video!!!

Makes it a lot easier with glasses doesn't it! One can SEE one MUST see! ;)

New popcorn machine!! 😎

How old are those 2 old small e. caps?

I'm speechless!

what games left the building to make room for your new setup?

How's the Paperboy coming along?

You forgot the journey monitor? Also exhausted you?

OMGWTFBBQTGIFTMI A NEW JOHN'S ARCADE VIDEO! 🎉🎊🥳💃

Did u ever get to fix this ar III power board u were working on

Say, check the 5v again without load on the power lead. Set to 5V power off, then plug it in power on and test from the back of that connector. If the power has dropped it's a good chance you have a filter cap or other components on the paperboy PCB shorted drawing the power down. Sadly this could be nearly any one of the IC on that board. If there is 5v on the connector but not your 5v test point, again the paperboy PCB. Check the traces and resistors on the 5v to that point as something in the path could be burned cracked or devalued. Look for a hot IC, would be nice if you had a flir IR camera or something similar to view the board, specifically the IC for a hot point. You probably have this idea already, but figured I'd toss it out.

could there be an excess power drain from the PCB you're connecting to? Could you test the power supply on a different PCB to compare? Good luck, and looking forward to your next video.

Something else is dragging the voltage down, freeze spray or your finger and start hunting :). BTW transistors can ohm fine, but fail when you turn them on (when they starts getting hot), but you have change them so thats not your problem here

John Another grill video Is tasty

Those transistors have been replaced before or they would have the old mica insulators, not the newer grey thermal pads, i would have re-capped the board before even touching the IC's.

John!! I’m getting a Berzerk that has board issues, I need some advice do I send it off to get fixed and if so where? Or do I put in a new multi board in I’ve found one online the has Berzerk plus two other games on it but I’ll have to get an adapter, I am not good with troubleshooting or fixing this stuff but I’m getting this cabinet working condition for 50 bucks I cannot pass it up, however I need some advice thanks John and I’m glad you’re back!!!!

That pork looked good 👍👍👍

Amazing #100

Guess who's back... Back again 😏

.9v, how do you know it is not a short circuit in the load and by that way the PSU trigger the protection?

Any on the road videos coming up

Can those de soldering guns be used on Computers or are they specifically for arcade repairs

No fair showing us that pulled pork!!

You should make sure the paperboy video board hasn't got a 5v to ground short on it using a multi meter. You could be doing all this work on the power supply for it to be fine all along.

what is the switcher for on the side of the cab ?

@36:22 Ha ha ha, "Three in the front...and two in the back."

Didn't Adam have this issue on a board he was working with? Ended up being a cap on the game pcb. Or I might be thinking about something else.

Oh my god that meat looks so fricken good XD

Soon be time for the next Year End Video 2019 !

Yum!

John are you coming back please tell me you are

Hey John..hope things are ok with you

did john hunt down the same model popcorn machine on ebay or did he fix it, or....wait, have the machines become sentient and self replicating????

The hawk in the BG is screaming

Looks like you got the meat of the problem at the end of the video

You fixed the Popcorn machine? I didnt see a restore video lol

New popcorn machine? Last video shows it still bent up.

"The shotgun did not fix it." Well, ya haven't really shotgunned a board until _every_ component that you can replace has been replaced.

First!!! Welcome back john!!!

F for Journey and Quantum. Especially Journey. All the time we spent watching the restore.

I dont know how 2 dissconnect a pinball knocker does anyone know ?

Treager screwdriver is legit, right?

Ha, I’m smoking on my Traeger as I watch this video.

Missing your vids bud.

"I just replaced all of the caps on this side," but then "this cap... is not part of the kit, so we're not replacing that one." LOL, OOPS!

hi john how have you been when is your next video as its been quiet lol