How to Install Transmission Drive Belt Husqvarna Lawn Tractor

Рет қаралды 23,306

11 ай бұрын

How to Install Transmission Drive Belt Husqvarna YTH 24V54 Lawn Tractor.
How to Remove Mower Deck Husqvarna YTH24V54. • How to Remove Mower De... .
Flush Cut Side Cutters. amzn.to/3rR5GD9.
Plastic Fastener Tool. amzn.to/3OgaNEB.

Пікірлер: 33

@DavidWilson-vn7fm 3 ай бұрын

Thank you for the easy to follow video Brad you’re right, you do make it look easy! It’s going to take me several times of watching this over and over but thanks to you I’ve got this : )

@JohnsonsSmallEngines 3 ай бұрын

You can do it! Just take your time and you will be fine! Thank you for watching and the kind comment.

@LoveCATtherian Ай бұрын

Bravo. You are a complete teacher. Thank you.

@JohnsonsSmallEngines Ай бұрын

I'm glad it was helpful and thank you for the very kind comment!

@bigmackstruckstop9213 11 ай бұрын

Thanks for the video Brad, I enjoy when you show the tools you use,I'll have to buy a few more tools for my 11 year old John deere D110 tractor, I'll catch ya on the next one.

@JohnsonsSmallEngines 11 ай бұрын

Thanks for watching, commenting and supporting my channel!!

@marathoner43 8 ай бұрын

Thanks for this video. I love the idea of hoisting the front end. I did that on my YTH18542. Mine was different in that it didn't have the same setup coming off the crankshaft, but I was able to figure it out and got the belt changed. Again, thanks for posting this.

@JohnsonsSmallEngines 8 ай бұрын

I’m glad it was helpful, thank you watching, the kind comment and you got the job done! The hoist is definitely a game changer! I’ve been using it for over 25 years.

@CaptRage 3 ай бұрын

Thank you Brad! Your video was a huge help! Unfortunately it took 2 trips to Lowe's because I grabbed the wrong belt; was supposed to be 1540877, but I grabbed 1540887. 😖 Thankfully, I live 4 minutes away. Anyway, great video, and great instructions!! 🍺🍺

@JohnsonsSmallEngines 3 ай бұрын

I’m glad to hear all worked out. Thank you for sharing and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching.

@RandyBardin-yx6ho 7 ай бұрын

Ty for your video .I just replaced my drive belt and went smooth thx to you . Again ty 😀😀

@JohnsonsSmallEngines 7 ай бұрын

I’m glad it was helpful and thank you for the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated!

@robertmailhos8159 11 ай бұрын

Great job on your replacement on this drive belt on this mower

@JohnsonsSmallEngines 11 ай бұрын

Thanks Robert!

@robertmailhos8159 11 ай бұрын

@@JohnsonsSmallEngines Amy time Brad 👍😎😁

@lancecluster 2 ай бұрын

Nice video, looks like it will help with my ariens 46 hydro which I believe is made by husqvarna. Thanks for making this.

@JohnsonsSmallEngines Ай бұрын

You are correct. Many Ariens were made by American yard products and American yard products made many machines for many different companies. Husqvarna has taken over American yard products.

@watermanone7567 11 ай бұрын

Nice work again. I have had customers also ask about the belt tension on those mower drive belts. Don't know if anyone has come up with a solution. Maybe the spring loses tension after some time. Thanks for the video.

@cr2fabrication 2 ай бұрын

Excellent video!!!

@JohnsonsSmallEngines 2 ай бұрын

Thank you very much! I'm glad it was helpful and thank you for the kind words.

@lobdsk 10 ай бұрын

Hoisting the front end is defo the best way to do this

@mattlell1789 2 ай бұрын

Ty sir!

@JohnsonsSmallEngines 2 ай бұрын

You’re very welcome! I’m glad it was helpful.

@bobbiebyrer6293 3 ай бұрын

I CAN NOT get the belt on, its like not big enough but I know it's the right size, what am I doing wrong? Is there like a safety thing or what?

@robertweston2775 2 ай бұрын

Hi Brad - thanks for doing this video! Question - I have a Husqvarna GTH that I started to replace the drive belt on (just like what you are doing in the video). When I turned the 5/8" bolt (on the bottom pulley), the engine turns over. Is there a way to disconnect/disable the engine from turning over when the 5/8" bolt is turned? Thank you!

@JohnsonsSmallEngines 2 ай бұрын

If you have an electric PTO clutch, the easiest way is to use a power tool, borrow one if needed. Or i have heard of using a rope put inside the spark plug hole to stop the piston from going over top dead center and this should work. I have not yet tried it but I think I will make a video on it at some point. Perform a search on KZfaq on "How to remove the bolt from an electric PTO on a lawn tractor without using power tools" I'm sure there are many out there to help. I am still learning from many comments and I do appreciate the positive feedback. I hope you get the job done and let me know how you performed getting the bolt off.

@robertweston2775 2 ай бұрын

@@JohnsonsSmallEngines Great info! Thank you very much!

@gnfanatic9139 3 ай бұрын

I am the second owner of a Husqvarna YTH180, I lifted the front end to change the drive belt and noticed by PTO clutch did not have the bar in the slot. I am not sure if some PTO's have to have the bar in the slot and some don't?? I never had an issue with the deck not engaging. I would appreciate it if anyone can answer my question!

@JohnsonsSmallEngines 3 ай бұрын

The bar keeps the PTO from spinning. You most likely have a bracket already mounted somewhere. If you take the your PTO off. You should see how it is. There are many different ways the bracket is depending on the model of machine.

@thefitzwater4805 Ай бұрын

I cut my left hand off at work. I'm also a one hander. Ha

@ShowMeWhatINeedToKnow 4 ай бұрын

HE SAID SHAFT

@tractorbob58 Ай бұрын

Take photos before you take the belt off

@nighthawk7921 3 ай бұрын

At 6:08 of the vid... bottom right hand side, where the anti-sway bar MOUNT is located on the frame.... is the frame cracked or broken there? .... any one else seeing this? 6:28 shows the crack a little better ... At 8:04 you can see the BREAK/CRACK in the frame really good. At 8:27 you can see the crack and I think I know why.... Notice the bracket coming down right where the crack is. that is the anti-sway bar mount. when you engage your deck, the deck gets a really good "jarring" when it starts up and the anti-sway bar pulls on that bracket, and over time it looks as if that mounting bracket is causing stress on the frame in that area. if this is not remedied soon, that frame will crack more and actually break. anyone else seeing what I am seeing?